Cinch Connectors
Vinita, OK 74301
Nov 08, 2007 Available in 330 and 1,000 pF configurations, RoHS-compliant high-density filtered D-Sub connector features dense contact arrangement. Using turned pin contacts, connector shells are available in bright tin or nickel finish. Filter elements are encapsulated using epoxy resin for optimal performance characteristics in hazardous environments.

ITT Electronic Components
Santa Ana, CA 92705
Oct 23, 2007 Built with aluminum shells able to withstand harsh environment applications, TMDMP filter is available in 5 sizes with contacts for both sockets (receptacle) and pins (plugs). Internal filter design provides density needed to accommodate ferrite tubes necessary for Pi filtering in military and aerospace applications. It utilizes 2 capacitors around ferrite inductor to provide optimal attenuation. Capacitance values include H, L, M and T.

Spectrum Control, Inc.
Fairview, PA 16415
Oct 22, 2007 Custom line of connectors are for use in 60 V audio frequency circuits with 0.5 A of current to provide effective EMI filtering. Waterproof, polarized devices have capacitance value range of 10 pF - 1 mF and are available in C and Pi circuit configurations, as well as 5- or 6-pin electrical plugs/receptacles. They also meet all requirements of MIL-STD-810F, including sand, dust, salt, fog, high altitude operation, fungus resistance, and immersion to 20 meters.

Quickfilter Technologies, Inc.
Allen, TX 75002
Oct 04, 2007 Housed in 3 x 3 mm QFN package, QF1D512 SavFIRe Chip can be configured to provide complete digital filtering for 2-way audio crossover network. Chip enables 100 dB attenuation in stop band and better than 24 dB per octave attenuation in transition band based on 48 kHz sampling and 1,500 Hz crossover. Configuration can be applied to wired and wireless audio systems including wireless speakers, devices that plug into iPods®, and audio systems for stereo networks.

Spectrum Control, Inc.
Fairview, PA 16415
Sep 07, 2007 Available with M3 x 0.5 feed-thru circuit and M4 x 0.7 Pi circuit, Metric EMI Filters feature current rating of 10 A, voltage rating of 100 Vdc, and dielectric withstanding voltage of 250 Vdc. Units can be mounted in tapped hole or thru-hole and have hex head dimension across flats of 4.0 mm. Designed with resin sealed case, filters are environmentally protected and suited for signal/data lines, industrial controls, telecommunications, and test equipment.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Jan 23, 2007 With profile of 0.6 mm and pin to pin pitch of 0.4 mm, VEMI filter arrays optimize real-estate and provide ESD protection in portable electronics. RoHS-compliant products come in 4-, 6-, and 8-channel versions and are capable of attenuating unwanted signals by more than 30 dB over 900 MHz to 2.3 GHz frequency range. Offering 100 W resistance and 60 pF input capacitance, series also provides transient protection for data lines per IEC6100042 and IEC6100045.

American Power Conversion
West Kingston, RI 02892
Jan 11, 2007 APC AV C3 Power Filter delivers surge protection and isolated noise filtering to help eliminate power anomalies such as surges, spikes, or EMI/RFI that threaten AV component hardware, signal integrity, and system availability. Featuring 8 outlets, unit offers surge protection efficiency with less than 85 V let-through rating. Gold Coax connections and phone jack surge protection provide additional safeguard for incoming signals on dataline.

Schaffner EMC, Inc.
Edison, NJ 08837
Nov 28, 2006 Constructed with plastic housing and metal base plate, FN 3025/3026 three-phase EMC filters are rated for currents from 20-50 A and max continuous operating voltages of 3 x 520 Vac. RoHS-compliant products do not require potting compound and feature hinged transparent safety covers and electrical connections based on motor drive technology. While FN 3025 filters are suited for screw mounting, FN 3026 filters are optimized for mounting on TS 35 DIN-rails.

TDK Corporation of America
Mount Prospect, IL 60056
Oct 23, 2006 Designed for mobile phones, MEA2010LV series multilayer chip EMI filter arrays combine noise countermeasure functions with protection of circuits from static electricity. Each device provides EMI and ESD countermeasures for 4 signal lines, and has ESD-resistance of an 8 kV contact. Employing high-precision internal pattern formation and structure optimization technologies, array series consists of 3 products with capacitances of 10, 15, and 22 pF.

TDK Corporation of America
Mount Prospect, IL 60056
Oct 20, 2006 Measuring 1.6 x 0.8 x 0.5 mm, MEA1608PE series is comprised of 4 filter arrays with capacitance values of 15, 22, 27, or 36 pF that attenuate noise in 470-770 MHz range. These multilayer chip EMI filter arrays are intended for mobile terminals compatible with terrestrial digital television broadcasts as well as other noise countermeasure applications in 470 MHz to 2 GHz range. Each noise countermeasure component is Pb-free and RoHS-compliant.

Schaffner EMC, Inc.
Edison, NJ 08837
Sep 07, 2006 Featuring minimum of 100 db insertion loss up to 6 GHz and EMI attenuation up to 6 GHz, ACARA(TM) filtered electrical power connectors have capacitance values from 220-2,100 nF. UL-listed and EN-approved units have ability to prevent RF emission and protect sensitive computers, switchgear, and cellular equipment. Positive latch prevents accidental unmating, but allows for immediate power disconnect for emergency service.

Schaffner EMC, Inc.
Edison, NJ 08837
Aug 08, 2006 Supplied in nickel-plated housing, FN 2030 general-purpose EMI filters and FN 2090 dual-stage EMI filters use permeable magnetic core and are RoHS-compliant. FN 2030 suits electrical equipment applications requiring only single-stage EMI filter, while FN 2090 helps resolve more severe or complex EMI issues. Both products offer optional medical and safety versions, optional surge pulse protection, and various terminal options for selection of connection style.

Lambda Americas
San Diego, CA 92154
Jul 19, 2006 Available in current ratings of 6, 10, 16, 20, and 30 A, Series MA and MX are rated for 250 Vac or 250 Vdc input with max earth leakage current of 1 mA. Single-stage MA Series attenuates frequencies in 150-500 kHz band, while 2-stage MX filters attenuate frequencies over 150 kHz to 30 MHz band. Housed in 2 x 3.6 x 1.6 in. package, all units feature hinged cover and barrier strip design that combines convenience of captive screws with safety of ring tag terminals.

Picor, a subsidiary of Vicor Corporation
North Smithfield, RI 02896
Jul 03, 2006 Operating from 10-76 Vdc, QuietPower® QPI-12 attenuates conducted common-mode and differential-mode noise to comply with CISPR22 requirements. It supports 7 A loads up to 80°C, is parallelable for high power, and occupies 0.5 in.² of board area. QPI-10 complies with AdvancedTCA PICMG3.0® requirements for hot insertion and board-level conducted noise limitations defined by EN 55022 class B. It provides conducted common-mode and differential-mode noise attenuation from 150 kHz to 30 MHz.

California Micro Devices
Milpitas, CA 95035
May 05, 2006 Available in 0.40 mm pitch chip scale package, Praetorian(TM) CM1452 EMI filter is offered in 4, 6, and 8 channel versions. Each channel consists of 3 pole L-C filter with min inductor value of 17 nH and nominal capacitor values of 15 pF. Device offers ESD protection up to ±15 kV contact discharge per IEC61000-4-2 Level 4 specification and ± 30 kV using Human Body Model. Typical corner frequency is 300 MHz and attenuation is greater than 30 dB between 800 MHz and 3 GHz.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Apr 18, 2006 VEMI filter arrays provide EMI filtering and ESD protection for data lines in space-critical mobile applications. Units are available in LLP75-6A, LLP75-7A, LLP70-9A, and FlipChip (BGA) packages and in 2-, 3-, 4-, and 6-channel configurations, respectively. Devices combine -30 dB filter attenuation from 900 MHz to 2.3 GHz and 30 kV ESD protection. Arrays provide I/O protection in mobile and smart phones, laptop computers, PDAs, MP3 players, and modems.

Foster Transformer Co.
Cincinnati, OH 45223 2571
Apr 05, 2006 Available for 100-120 or 200-240 line voltages, RoHS-compliant EMI Filters feature fully encapsulated construction that complies with EN 133200 and UL 1283 as well as UL94 VO plastic enclosure that protects against electrical shock. Products can be mounted with ¼ in. quick connect terminals, allowing use wherever EMI control is needed, including multiple locations within one piece of equipment. Standard models incorporate 5.0 mH common mode inductors suitable for up to 6 A service.

ITT Industries Cannon
Watertown MA 02172
Mar 31, 2006 Featuring Canon CoF technology, filter connector provides standard filtering capabilities including individual isolated pin filtering of high-frequency noise, built-in ground plane barriers in the connector inserts, and filtering at face of system boxes. In MIL-DTL-38999 configurations, it meets MIL-STD and MIL-DTL Series III standard for thermal shock, random vibration, humidity, and high altitude. Light weight CoF connector suits military, aerospace, and industrial applications.

California Micro Devices
Milpitas, CA 95035
Mar 28, 2006 Housed in TDFN package with 4, 6, or 8 channels, single-chip Praetorian(TM) CM1460 provides EMI filtering and ESD protection for interfaces connecting host processor to camera and display modules in wireless handsets. Each channel consists of 3 pole L-C filter with minimal inductor value of 17 nH and nominal capacitor value of 15 pF. Chip provides ESD protection up to ±15 kV contact discharge per IEC61000-4-2 Level 4 specification and ±30 kV using HBM.

California Micro Devices
Milpitas, CA 95035
Mar 02, 2006 Praetorian(TM) ASIP(TM) EMI Filter, Model CM1419 integrates spiral inductors with capacitors, diodes, and resistors on single chip, resulting in equivalent series resistance of 0.28 Ohms with minimal insertion loss in 5-bump CSP format. ESD diodes connected to filter ports safely dissipate ESD strikes of ±30 kV. Attenuation levels are greater than -40 dB in 800 MHz to 2.1 GHz frequency range. Model CM1418 features same electrical characteristics in larger 6-bump footprint.