Maxtena, Inc.    Rockville, MD 20855
May 23, 2013 Combining Helicore® technology with monopole-type UHF antenna operating from 300–800 MHz, DualMax-Helical/UHF is suitable for applications requiring simultaneous access to different satellite systems for emergency communication. Helical element can be tuned for GPS/GLONASS bands, Iridium network, or Globalstar network. Measuring 50 mm in length by 13.2 mm in diameter from top of radome to base, antenna includes U.FL connector as standard, and cable with customizable length and thickness.

Barco, s.r.o.    Buchlovice 687 08  Czech Republic
May 09, 2013 With read range of 4–7 m, FlexiRay SF Antennas are suitable for indoor RFID portals and reading zones in entrances, gates, and doors as well as time attendance, access control, and asset tracking applications. Slim 2 mm profile allows invisible installation, embedding into door frame, kiosks, smart displays, and floor mats. Supplied in 3 lengths, FlexiRay SF-2.X allows optimal adaptation to specific installation. Antennas have circular polarization and are available for FCC and ETSI frequencies.

Ethertronics, Inc.    San Diego, CA 92121
Apr 08, 2013 EtherDAS 1.5™ and EtherDAS S™ can achieve passive intermodulation (PIM) performance of -153 dBc in all 2G, 3G, and 4G bands – from 700 MHz to 2.7 GHz. While EtherDAS 1.5 provides Voltage Standing Wave Ratio (VSWR) spec of <1.5:1 for optimum impedance match, EtherDAS S employs proprietary technique to shape antenna's radiation pattern and thereby optimize wireless coverage within building. Both products come in N connector, DIN connector, and 500 mm pigtail with N connector versions.

Pulse Electronics    Trevose, PA 19053
Feb 28, 2013 Measuring 35 x 50 mm with minimum thickness of 0.185 mm and 2 x 2 mm pad size, NFC Ferrite Sheet Antenna enables mobile devices to read data from up to 40 mm, supporting communication with other wireless devices for payments, access and control, credential storage/exchange, and content consumption. Antenna is constructed of thin ferrite with one-sided flex and thin adhesive. EMVCo specifications ensure global interoperability and compatibility of chip-based payment cards and acceptance devices.

Ubidyne GmbH    D-89081 Ulm   Germany
Dec 20, 2012 Supporting fully digital Distributed Antenna System, Active Antennas extend mobile broadband coverage to indoor or outdoor data hot spots. Up to 16 independent single-band to quad-band remote antennas can be strategically located and connected using any grade of fiber to central hub, based up to 10 km away. With full digital control of each transceiver/radiator, single DAS solution can be used by different wireless carriers in same location to meet specific coverage and capacity needs.

Ethertronics, Inc.    San Diego, CA 92121
Nov 26, 2012 Combining advanced antenna architecture and EtherChip 1.0™ tunable capacitor on printed circuit board, EtherModule 1.0™ features typical dynamic range of 20 dB. Device provides tuning capability, seamlessly adjusting characteristics of antenna to dynamic requirements. Measuring 35 x 15 x 10 mm, plug-and-play device is able to cover one frequency or wide range of frequencies depending on needs - from 100 MHz to 3 GHz - including 2G, 3G, and 4G cellular as well as Bluetooth, ISM, WiFi, and ZigBee.

L-Com, Inc.    North Andover, MA 01845
Nov 23, 2012 Available in 9 dBi and 13 dBi versions, 2.4 GHz HyperLink® WU-Series Horizontal Polarized Waveguide Omnidirectional Antennas are suitable for use in areas susceptible to affects of interference generated by vertically polarized wireless LAN equipment. Units feature rugged UV-resistant PVC radomes designed for all weather operation, and come with steel mast mounting brackets.

L-Com, Inc.    North Andover, MA 01845
Nov 12, 2012 With gain from 12–19 dBi, HyperLink Series includes models for 2.4, 2.4/5.8, 3.5, and 4.9–5.8 GHz bands. Units use multiple-in/multiple-out formats with 2 or 3 active elements. Dual polarization means antennas send/receive using both vertically and horizontally polarized beams simultaneously, allowing for multi-thread communication in MIMO/802.11n applications.

Mayfield Plastics, Inc.    Sutton, MA 01590
Oct 01, 2012 Available in sizes from 18 x 18 in. to 46 x 46 in. with thicknesses from 0.250–0.387 in., Custom Plastic Radomes conceal antennas and other electronic equipment, protecting them from elements and minimizing air drag. Weatherproof units are custom thermoformed from selection of plastics that will not interfere with signal transmission, including ABS, ABS 776/752, and ABEX 700. Radomes can be coated with UV stabilizers and paints in custom colors and printed per OEM requirements.

Pulse Electronics    Trevose, PA 19053
Sep 05, 2012 Planar ferrite sheet antenna, measuring 35 x 50 mm with minimum thickness of 0.30 mm, enables safe, non-contact, wireless communication for NFC connectivity to mobile devices. Even when installed in handset in close proximity to battery or metal housing, this near field communications (NFC) antenna lets mobile phones read data from distance of up to 40 mm to meet EMVco specifications. Design can be customized to accommodate varying sizes of handset mechanics.

PREMO Group    Barcelona   Spain
Sep 04, 2012 Featuring 3 orthogonal coils, series 3DC09AOI SMD electromagnetic 3D-coil antenna measures 10.5 x 9.5 x 3 mm has side metallization and pads with gold finish. Windings are protected by polymer matrix (vacuum process) for stability, with less than 200 ppm expansion and thermal resistance. Supporting double lead free reflow (270°C peak) and exhibiting stability in temperatures from -40 to 85°C, antenna is offered in standard value of L = 14 mH with sensitivity greater than 9 mVpp/App/m @ 20 kHz.

L-Com, Inc.    North Andover, MA 01845
Aug 21, 2012 Featuring heavy-duty all-weather plastic radome, Hyperlink Flat Panel Antenna is designed for indoor or outdoor 900 MHz ISM band applications, 900 MHz cellular applications, SCADA, and RFID applications. Radome uses thick UV-stable plastic to provide 60° vertical or 70° horizontal beam width. In addition to direct ground lightning protection, antenna comes with tilt and swivel mast mount kit for alignment in either polarization.

L-Com, Inc.    North Andover, MA 01845
Aug 15, 2012 Designed for performance in 4.9-5.8 GHz applications, HyperLink MIMO/802.11n antennas produce directive signal beam common in point-to-point applications. Dual polarity feature allows multi-thread communication, or transmitting data on one polarization and receiving it on other simultaneously. Comprising 3 models with 25, 30, or 34 dBi gain, antennas use type N-Female connectors and also include tilt and swivel mast mounting hardware.

Barco, s.r.o.    Buchlovice 687 08  Czech Republic
Jul 30, 2012 Used to create RFID reading zones, FlexiRay(TM) SF-110X is available with respective dimensions of 155 x 100 x 2 mm and 110 x 100 x 2 mm for ETSI and FCC frequencies. Antenna can achieve range of over 2 m and is suited for access control, embedded kiosk, or smart rack applications as well as product traceability and manufacturing applications. Optionally equipped with all-metal enclosure, ruggedized FlexiRay SFR-110X serves industrial and manufacturing applications.

W. L. Gore & Associates Cable & Assemblies    Landenberg, PA 19350
Jul 17, 2012 Installed along length of wide-body or single-aisle passenger aircraft cabin ceiling, GORE® Cable-Based Antennas (leaky lines/feeders) send/receive signals from 400 MHz to 6 GHz and offer signal propagation for every meter. This provides passengers with reliable access to in-flight entertainment, Internet servers, and email accounts. Offered in lengths of 65+ m, antennas require one set of hardware for entire aircraft, regardless of its size, and do not require maintenance once installed.

PREMO Group    Barcelona   Spain
Jun 21, 2012 Providing up to 50 mV/Apk-pk/m (for 7.2 mH) sensitivity, TP0702U and TP0702UCAP are SMD antennas for 20-150 kHz receiver applications. Model TP0702UCAP provides upper and lateral side protection with co-polyamide polyhexamethylene polymer walls, gamma radiated with thermal stability to 290ºC and mechanical resistance exceeding 150 Mpa. Antenna has NiZn ferrite core with surface resistivity greater than 10 Mohm/mm that provides stable behavior of better than ±3% over -40 to +125ºC range.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jun 19, 2012 Complying with MBRAI standard for portable communication, 868 MHz Models VJ5301M868MXBSR and VJ5601M868MXBSR measure 35 x 5 x 1.2 mm, while 915 MHz Models VJ5601M868MXBSR and VJ5601M915MXBSR have 15.5 x 10.5 x 1.2 mm outline. Surface mount antennas feature 50 W unbalanced tuning interfaces and operating temperature of -40 to +85°C. Halogen-free per IEC 61249-2-21, RoHS-compliant devices are suited for medical telemetry, industrial automation, security systems, and remote sensing/control.

Ethertronics, Inc.    San Diego, CA 92121
Jun 04, 2012 Designed for offices, arenas, airports, and convention centers, EtherDAS Indoor(TM) Antennas achieve passive intermodulation performance of -153 dBc in all 2G, 3G, and 4G bands from 700 MHz to 2.7 GHz. Product line includes 2 omni-directional units: one with 525 mm pigtail connector and one with N connector, both in neutral color to blend into surroundings.

Ubidyne GmbH    D-89081 Ulm   Germany
May 25, 2012 Intended for small-cell and macro-cell active antennas, Micro Radio Transceiver provides output power from 0.8-6.4 W by parallel use of P-Chips. Each P-Chip Doherty MMIC power amplifier delivers more than 39 dBm peak output power. Based on micro radio, uB700 Active Antenna System supports 4G in 700 MHz digital dividend band for broadband mobile networks, while uB900 supports GSM, UMTS, and LTE in 900 MHz band. Each micro radio can be controlled digitally and independently by central hub.

Pulse Electronics    Trevose, PA 19053
May 08, 2012 Measuring 65 x 12 x 1 mm, Programmable LTE Antenna enables 4 states for low band operation: 700-750 MHz (LTE low), 750-790 MHz (LTE high), 820-900 MHz (GSM850), and 880-960 MHz (GSM900) as well as high band operation covering GSM 1800/1900/2100. Antenna features return loss of -6 dB, impedance of 50 W, and efficiency greater or equal to 40%/-4dB. To fit function of laptop, antenna can be implemented to device display area and adjusted for various display sizes.