|
|
|
|
Communication Systems & Equipment ->
RF & Microwave Communication Systems & Equipment
RF & Microwave Communication Systems & Equipment
(Showing headlines 881 - 900) << 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
|
Synthetic Instruments are LXI Class A-certified.Agilent Technologies, Inc.
Santa Clara, CA 95051
Nov 24, 2006
Designed to support US Department of Defense (DoD) NxTest objectives, 6 microwave synthetic instruments (SI) are LXI (LAN eXtension for Instruments) Class A-certified. SI common system architecture enables DoD contractors to design scalable, automated test systems (ATS), offering flexibility to insert technology and transform ATS to accommodate new measurement applications. Reusability of modules in different measurement scenarios provides obsolescence protection.
|
RF Switch bridges gap between Wi-Fi and RFID systems.Symbol Technologies, Inc.
Holtsville, NY 11742
Nov 08, 2006
Leveraging Wireless Next Generation architecture, Model RFS7000 runs on Linux and supports and consolidates Wi-Fi and emerging RF technologies such as RFID 802.11n, mesh, Voice over WLAN, and WiMAX. It supports up to 256 802.11a/b/g access ports, and provides redundancy and scalability for more than 2,000 access points. Switch enables Layer 3 roaming without additional external applications and 3rd party servers, to handle multi-floor or large-scale campus-wide deployments.
|
IP-Based Switch is designed for TETRA network customers.Motorola, Inc.
Schaumburg, IL 60196 4041
Nov 07, 2006
Designed for small to medium sized private radio networks, Dimetra® IP Compact switch is housed in single rack less than 1.5 m high. Optional Multi-Slot Packet Data (MSPD) services provide up to 28.8 Kbps gross data transfer, enabling delivery of integrated voice and data communications. Simple to transport, install, and operate, switch also offers optional security features, such as TETRA Air Interface Encryption and E2EE solutions.
|
 Order Fulfillment System uses voice commands.FKI Logistex North America
St. Louis, MO 63132
Nov 02, 2006
Freeing workers from paper pick lists and terminals, EASYpick® Voice provides clear voice commands via wireless network. It combines wearable computer with VISE(TM) Voxware Integrated Speech Recognition Engine. Utilizing speaker-dependent technology, each order filler can build custom profile, or voiceprint. Continuous speech recognizer, powered by Voxware®, enables order fillers to communicate with system in natural fashion, while noise-canceling microphones minimize chance of work interruption.
|
Microwave Matrix Switches are LXI compliant.Pickering Interfaces
Wobum, MA 01801
Nov 01, 2006
With LXI compliant interface that provides simple method of controlling matrix through web browser or programmatic interface, 60-750 and 60-751 LXI Microwave Matrices occupy 2U of rack space. Model 60-750 is available as single or dual 4 x 4 matrix or as 8 x 4 matrix to 10 GHz, while 60-751 20 GHz version is offered as single 4 x 4 matrix. Auxiliary output allows products to control and supply power to external relays or loads.
|
 Radar Instrument provides bulk solids measurement.Ohmart/VEGA Corp.
Cincinnati, OH 45209
Oct 30, 2006
Two-wire VEGAPULS 68 uses frequency of 26 GHz to achieve strong return signal from solid materials. With 1,000x magnification of returned signals to sensor, unit is able to see and evaluate echoes in low dielectric conditions and over range up to 230 ft. Parabolic antenna emits consistent signal without interfering effects, making it insensitive to contamination and damage. Non-contact, maintenance-free device can be configured without changing process level.
|
RFID Printer/Encoder is suitable for high volume applications.Zebra Technologies
Vernon Hills, IL 60061 3109
Oct 27, 2006
Built on XiIIIPlus(TM) platform, R110Xi high frequency (HF) radio frequency identification (RFID) tabletop printer/encoder offers 4 in. print widths, 203 and 300 dpi print resolution, and XML encoding. It encodes passive inlays using multi-protocols such as ISO15693 and ISO18000-3 mode 1, and provides MIFARE® ultralight support. Industrial, multi-protocol RFID solution is suitable for high-volume and on-demand smart label printing and RFID tag encoding.
|
Tactical Radio operates at frequency ranges to 2 GHz.Harris Corp.
Melbourne, FL 32919
Oct 25, 2006
Providing 20 W of output power, Falcon® III combines multiband radio features with commercial L-Band SATCOM and wideband mobile ad-hoc networking. It incorporates Advanced Networking Wideband Waveform to provide secure IP data networking to tactical Internet at on-air rates up to 10 Mbps. Radio includes embedded encryption for voice and data, and embedded military-grade GPS receiver for timing and situational awareness.
|
 RF Switching Module performs at frequency range of DC-18 GHz.Dow-Key Microwave Corp.
Ventura, CA 93003
Oct 24, 2006
Compatible with PXI standard chassis and cards, DK-PXI-1001 multifunctional radio frequency (RF) switching module is designed for mobile, desk-top testing stations. It occupies 4 slots of standard 3U PXI chassis with only first left slot requiring electrical connection. With maximum switching speed of 20 ms and operating life of 1 mil cycles, PXI matrix is supplied with software package that includes IVI-compliant driver.
|
Chipset targets personal navigation devices.Atmel Corp.
San Jose, CA 95131
Oct 24, 2006
Based on ARM926EJ-S(TM) microprocessor, Model ATR0663 includes GPS baseband and LCD controller with integrated 2D graphics accelerator for virtual screen support of 2,048 x 2,048 pixels, AC97 audio controller, and image sensor interface. GPS technology provides hot start in less than 2 sec and tracking sensitivity of -159 dBm. Companion ATR0603 RF receiver IC maximizes performance of GPS engine while consuming only 12 mA in operation.
|
Dielectric Antenna is intended for wireless communications.Pirelli Broadband Solutions
Milano Italy
Oct 24, 2006
Designed for wireless access gateways, set-top boxes, and other customer premises equipment (CPE), integrated conformal antenna utilizes polymeric composites filled with dielectric ceramic powder to reduce fragility. Antenna is based on low aspect-ratio which can reduce overall height of CPE device.
|
EMI Filter Arrays feature ESD countermeasure function.TDK Corporation of America
Mount Prospect, IL 60056
Oct 23, 2006
Designed for mobile phones, MEA2010LV series multilayer chip EMI filter arrays combine noise countermeasure functions with protection of circuits from static electricity. Each device provides EMI and ESD countermeasures for 4 signal lines, and has ESD-resistance of an 8 kV contact. Employing high-precision internal pattern formation and structure optimization technologies, array series consists of 3 products with capacitances of 10, 15, and 22 pF.
|
GPS Receiver offers flexible firmware configurability.Sony Electronics Inc
San Diego, CA 92127
Oct 20, 2006
Single-chip CXD2985GL has digital baseband and RF CMOS down-conversion architecture that promotes sensitivity to -158 dBm, accurate positioning, and reliable dynamic performance with multi-path mitigation and tracking algorithm. Supplied in 10 x 10 mm silicon package, IC consumes 65 mW of power and is compatible with Fastrax's iSuite(TM) 3 SDK. Firmware and application software can be reprogrammed and customized to modify features and functionality.
|
Filter Arrays suppress noise in mobile phones.TDK Corporation of America
Mount Prospect, IL 60056
Oct 20, 2006
Measuring 1.6 x 0.8 x 0.5 mm, MEA1608PE series is comprised of 4 filter arrays with capacitance values of 15, 22, 27, or 36 pF that attenuate noise in 470-770 MHz range. These multilayer chip EMI filter arrays are intended for mobile terminals compatible with terrestrial digital television broadcasts as well as other noise countermeasure applications in 470 MHz to 2 GHz range. Each noise countermeasure component is Pb-free and RoHS-compliant.
|
 Power Amplifier suits 802.16 WiMAX Base Station applications.Z-Communications, Inc.
San Diego, CA 92126
Oct 18, 2006
Model ZPA3436-5W amplifier operates over 3.4-3.6 GHz band with typical gain of 46 dB and 37 dBm OFDM output power for 64 QAM, 3/4 Coding, 3.5 MHz channel bandwidth, and 256 carriers. Biased at 28 V, high linearity power amplifier achieves EVM performance of 2% at 37 dBm linear output power, and draws 3.5 A dc current. Design is lead free and SMA connectorized package measures 9 x 4 x 1.5 in. without external heat sink.
|
TWT Amplifier operates in 4.2-18 GHz frequency band.AR Worldwide
Souderton, PA 18964
Oct 13, 2006
Delivering 40 W of power, Model 40T4G18 Traveling Wave Tube Amplifier (TWT) is designed for applications where low harmonic content is required in sub-band ranges and where wide instantaneous bandwidth, high gain, and moderate power output are required. Features include built-in IEEE-4888 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus monitoring of TWT helix current.
|
 Digital Receiver Board provides FPGA signal processing.Pentek Inc.
Upper Saddle River, NJ 07458
Oct 11, 2006
Based on 215 MHz A/D converter VME with dual Virtex-II Pro FPGAs, Model 6821-422 includes wideband digital downconverter IP core. Preconfigured, digital software radio subsystem accepts front panel analog RF input and delivers real or complex digital output samples translated to baseband from any frequency slice of input signal. Operating at frequencies up to 296 MHz, core delivers adjacent channel rejection of up to 100 dB and frequency tuning resolution of 32 bits.
|
 Remote Power Solution works with IP security cameras.Phihong USA
Fremont, CA 94539
Oct 11, 2006
Comprised of PSD14 splitter and POE20U midspan, Power-over-Ethernet (PoE) package adds power to Ethernet cables and separates power and data at camera. Midspan provides up to 20 W of power, and PSD14 splitter offers up to 14 W of dc power to camera at end of 100 m cable. Both are compliant with IEEE 802.3af standards and feature LED indicators. Available in 5 and 12 V versions, PSD14 comes in non-vented case with 10/100/1000BASE-T data rates.
|
Data/Voice System suits patrol and interdiction vessels.International Communications Group, Inc.
Newport News, VA 23603
Oct 09, 2006
Providing simultaneous, over-the-horizon voice and data links, dual-channel MIS-200 Communication System contains two L-band Iridium transceivers, each operating independent circuit-switched connections through single antenna. Voice channel is tied into captain's headset with ability to directly dial operation center mission commanders. Satellite data channel provides for continuous transmission of vessel's position coordinates, course, speed, and time-stamp.
|
Power Amplifiers are designed for 0.8-18 GHz frequency range.AR Worldwide
Souderton, PA 18964
Oct 06, 2006
Hybrid traveling wave tube (TWT) amplifier Model 35ST1G18 delivers 35 W minimum at amplifier output connector with low harmonics, while Model 50ST1G18 provides 50 W minimum. Both solid state amplifiers are are 100% VSWR tolerant include built-in IEEE-4888 interface, 0 dBm input, gain control, RF output sample port, plus monitoring of TWT helix current, cathode voltage, collector voltage, heater current, heater voltage, baseplate temperature, and cabinet temperature.
|
(Showing headlines 881 - 900) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
|
|
|