RF Micro Devices, Inc.    Greensboro, NC 27409-9421
Mar 20, 2009 Offered in 2.0 x 1.3 x 0.35 mm QFN package, RF1126 low-power SPDT symmetric switch offers insertion loss and linearity performance suitable for signal routing and antenna switching applications. Offered in 2.0 x 2.0 x 0.55 mm QFN package, SP3T symmetric switches RF1131 and RF1132 provide insertion loss of 0.32-0.49 and 0.47-0.69 dB and linearity of 59/62 dBm and 65/63 dBm, respectively, making them suited for use in multi-band CDMA single routing applications.

Optical Zonu Corporation    Van Nuys, CA 91411
Mar 19, 2009 Series OZ516WMX Direct Modulation RF over Fiber Optics Links make it possible to centralize RF signal processing functions in one shared location and use fiber optics to distribute RF signals to remote antennas. This simplifies remote antennas, because they only need to perform basic optoelectronic conversion and amplification functions. Band support covers VHF, UHF, L-Band, S-Band, and WiMAX 2.3/2.5/3.5 GHz as well as U-NII and MMDS.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Mar 19, 2009 Supplied in 1 x 1 mm, 6-lead PDFN package, MASW-009444 suits RF switching applications with low control voltage requirements, such as handset filter switching down to 1.6 V. RoHS-compliant solution can also be used in most systems operating up to 6 GHz and requiring high power at low control voltage. Fabricated on GaAs PHEMT process, switch exhibits typ insertion loss of 0.3 dB at 1-2 GHz, with isolation of 23 dB and P1dB of 15 dBm. Full passivation ensures optimal reliability.

International Manufacturing Services    Portsmouth, RI 02871
Mar 13, 2009 Model VGX-2010WA dissipates 20 W at 100°C baseplate temperature, and features wraparound terminals for solder or epoxy attachment. Achievable VSWR is 1.3:1 to 12 GHz depending on implementation and attenuation accuracy starts at ±0.2 dB. Standard impedance of 50 W and attenuation values upto 30 dB are available including 0.5 dB increments.

Spectrum Control, Inc.    Fairview, PA 16415
Mar 12, 2009 With capacitance range of 10 pF to 1 µF, EMI Filtered Audio Connectors offer ESD protection up to 8 kV direct discharge and 15 kV air discharge. Waterproof and polarized, connectors come in plugs and receptacles and are available in C and PI circuit configurations. Units meet all requirements of MIL-STD-810F making them suited for aviation, communication, and security applications where electronic systems might be exposed to ESD environments.

Advantech Automation Corp.    Cincinnati, OH 45240
Mar 10, 2009 Acting as 802.11 b/g access point, EKI-6311G allows wireless devices to communicate with each other and 10/100Base-TX Ethernet wired networks. Client bridge operation connects one or more wired devices to wireless network, and wireless repeater functionality combines both formerly mentioned modes to extend wireless coverage areas. Supplied in IP65-rated, weatherproof plastic enclosure, multifunctional unit supports various enterprise security standards and may be managed via SNMP.

Doodle Labs LLP    Singapore   Singapore
Mar 06, 2009 Carrier-class IEEE 802.11 a/b/g wireless mini-PCI radio modules DLM106 and DLM106, respectively, support extended frequency ranges of 4.8-6.0 GHz and 2.3-2.7 GHz and programmable 5/10/20/40 MHz channel width for operation in licensed/unlicensed bands. Rated over 1,000 mW, both radios are based on Atheros sixth generation 802.11a/b/g AR5414A chipset and include features such as Adaptive Noise Immunity, QoS, and IEEE 802.11i security standards.

Harris Corp.    Melbourne, FL 32919
Mar 05, 2009 Promoting situational awareness for warfighters on networked battlefield, RF-7800V-HH supports simultaneous voice and data transfer. IP data rate up to 192 kbps enables transmission of bandwidth-intensive information, such as streaming video and Hi-Res image files, while MELP vocoder technology lends to quality and clarity of extended voice communication. Other features include plug-n-play USB and Ethernet inputs, Dual Net Push to Talk (PTT) capability, and embedded GPS receiver.

RF Micro Devices, Inc.    Greensboro, NC 27409-9421
Mar 04, 2009 Along with single-pole nine throw pHEMT switch, RF1194 integrates quad-band GSM/GPRS/EDGE transmit low-pass filtering and 4 GSM/GPRS/EDGE receive surface acoustic wave filters. Model RF1195 integrates single-pole ten throw pHEMT switch and builds on RF1194 architecture by providing additional high-linearity port for 4 total symmetrical WCDMA/HSPA+ Tx/Rx ports. Both cellular switch filter modules come in pin-to-pin compatible, 4.5 x 4.5 x 1.2 mm packages.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Mar 03, 2009 Suited for receiver and transmitter applications, MAAM-009116 IP3 Intermediate Frequency (IF) Amplifier features 18.0 dB of gain, 22 dBm of output P1dB power, and 40 dBm of output IP3 linearity while maintaining low noise figure of less than 2.4 dB. Housed in industry standard SOT-89 package, single stage device meets demands of complex communications systems.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Mar 02, 2009 Featuring multi-pole design to ensure that wanted signals are properly passed while others are rejected, DFCL series filters offer ripples of 0.4 dB max @ f0 ±30 MHz and 1.2 dB max @ f0 ±65 MHz, producing wide and flat curves required at pass band by DPD amplifier designs. Block-type filter measure 10.6 x 6.0 x 4.8 mm and are suited for cellular base station applications that use DPD as well as microcellls and femtocells.

Instruments For Industry, Inc.    Ronkonkoma, NY 11779
Feb 26, 2009 Designed specifically for bellcore testing, Model T101-100-50 single drawer amplifier measures 17.5 x 19 x 27 in. Compact, lightweight amplifier unit provides minimum of 100 W up to 4.0 GHz and 50 W to 10 GHz with better than -20 dBc harmonic levels.

Fujitsu Network Communications, Inc.    Richardson, TX 75082
Feb 26, 2009 Employing distributed architecture consisting of Remote Radio Head (RRH) and Base Band Unit (BBU), BroadOne(TM) LS LTE eNodeB base station enables mobile service providers to build their 4G wireless broadband infrastructure. BBU comes in both indoor and outdoor models to meet needs of diverse deployment environments. Designed for all-outdoor deployment, RRH incorporates high-output amplifier, enabling installation anywhere there is fiber, up to 20 km from RRH.

GAO RFID Inc.    Toronto   Canada
Feb 25, 2009 In combination with GAO 212007 DSP Long Range Fixed RFID Readers, 134.2 kHz GAO 312002 ASA Fixed Reader Antenna Panel provides optimizal reading distance of HDX and FDX RFID transponders, even under harsh and noisy conditions. Unit is suitable for cattle farms, slaughterhouses, packing plants, and livestock markets.

RADWIN    Tel Aviv 69710  Ireland
Feb 24, 2009 RADWIN 2000 provides up to carrier-class 16 E1s/T1s with native TDM service and native Ethernet featuring aggregate throughput of 100 Mbps. Combining OFDM and MIMO technologies, backhaul solution incorporates multi-band feature that supports 2.x and 5.x GHz frequency bands in one radio platform. Air interference and other technologies enable operation even in non line-of-sight environments and high-interference scenarios, and operating range is rated up to 75 miles.

Raymarine Inc.    Nashua, NH 03063
Feb 24, 2009 Providing digital and analog signal processing, RD418D and RD424D Radar Scanners include low-noise receiver technology for small target detection, and 8 pulse width/5 PRF transmitter, which ensures optimum performance through every range scale. Auto GST technology automatically provides intelligent control of gain, sea clutter, and tune adjustments, while optimizing small target returns.

VPT, Inc.    Blacksburg, VA 24063
Feb 23, 2009 With up to 10 A of output current and 150 W of output power, Model VPTi10-28 minimizes reflected noise of DC-DC converters, and simultaneously protects power system from inrush current damage. Unit provides transient operation up to 80 V per MIL-STD-704 and 100 V per MIL-STD-1275, making it suited for military and avionics applications. Housed in 6-sided metal enclosure, module operates over temperature range of -55 to 100°C and features 45 dB minimum attenuation at 500 kHz.

Reynard Corp.    San Clemente, CA 92673
Feb 23, 2009 Delivering consistent operation in LWIR wavelength band, Broadband IR Laser Output Coupler uses all-dielectric approach that reduces absorption in thin film design and stabilizes thermal effects as well as overall laser system design. Design addresses 7-11 µm wavelength band, providing stable reflectivity of 90% ±2%, and can be custom-sized and designed directly from specifications/drawings. Filter operation lends to optimized performance at, or near, normal angle of incidence.

Laird Technologies    Chesterfield, MO 63017
Feb 23, 2009 Utilizing MIMO technology, Dual-Band, SM24513P3 embedded antenna is suited for indoor WLAN applications in either 2.4-2.5 or 5.1-5.9 GHz band. It integrates 3 high-performance antennas onto one PC board assembly for internal connection to MIMO radio, and also includes micro coax cables. Antenna operates over temperature range of -30 to +65°C and incorporates polarization diversity that increases data throughput in multipath environments.

Crystek Corp.    Fort Myers, FL 33913
Feb 19, 2009 Packaged in rugged SMA housing, Crystek CATTEN series operate in frequency range of DC to 3 GHz. They provide 1 W of power dissipation (0.5 W for 15 dB and 20 dB models) and impedance of 50 W. With operating temperature range between -40 to +85°C, products suit test equipment, RF lab use and embedded applications.