Silicon Laboratories
Austin, TX 78727
Jul 02, 2008 Applying digital decoding techniques and leveraging digital low-IF architecture, Si4706 and Si4749 offer 8 µV EMF sensitivity with 5% block error rate in low-signal environments. Si4706 utilizes tuned resonance technology for embedded antennas and provides audio out for GPS-enabled mobile devices. AEC-Q100 qualified Si4749 offers full suite of received signal quality metrics for RDS alternate frequencies including RSSI, SNR, adjacent and alternate blockers, and frequency offset.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Jul 01, 2008 Tuned to cover frequency bands from 869-2,190 MHz, PIxxxxAG-21H line of 30 W reverse power single junction isolators feature forward IMD performance of -75 dBc, insertion loss of 0.2 dB nominal, and isolation equal to 20 dB minimum. With IMD performance of -70 dBc forward and -90 dBc reverse, insertion loss of 0.35 dB nominal, and isolation equal to 50 dB minimum, PDxxxxAQ-21H line of 100 W reverse power dual junction isolators cover 869-1,990 MHz frequency band.

RELM Wireless
West Melbourne, FL 32904
Jun 30, 2008 Featuring menu-driven programming and over-the-air rekeying and cloning, KNG-P150 has uninterrupted duty cycle of up to 18 hr. NIST-certified encrypted radio includes 512 channels and up to 32 zones, customized keypad, multi-line display, and offers software-driven upgrades. With 6 W of programmable RF output, IP67 submersible rated P25 digital radio is MIL-STD 810 C/D/E/F compliant. It is suited for users seeking compact radio with class-A performance specifications.

Anadigics, Inc.
Warren, NJ 07059
Jun 30, 2008 Designed for CATV set-top boxes, DVRs, PC TV tuner cards, and other tuner-on-board applications, AIT1032 1 GHz tuner incorporates upconverter, downconverter, VCO, synthesizer, RF and IF amplifier, and RF and IF gain control functions. It provides two 45 MHz IF outputs (1 analog, 1 digital), and operates from single +5 V supply. Offered in 7 x 7 x 1 mm 48-pin SMT, unit features single RF input that contains low noise amplifier with 35 dB of gain control range.

Sonus Networks
Chelmsford, MA 01824
Jun 27, 2008 WiMAX voice system helps operators deploy voice services over their mobile broadband networks, including mobile interactive multimedia services. It leverages IEEE 802.16 WiMAX standard that delivers wireless last mile access for fixed broadband services. WiMAX solution includes Sonus ASX, GSX, PSX, EMS, NBS and Activator that are relied upon for real-time voice services. Product delivers all capabilities individuals are accustomed to receiving via fixed-line network along with IP.

Spectrum Control, Inc.
Fairview, PA 16415
Jun 26, 2008 Ranging from 100 MHz to 22 GHz, Series 021 features integral TTL driver and is available with switching speeds of 100 nsec, isolation up to +95 dB, and insertion loss as low as 0.8 dB. Units are constructed with gold wire, gold-plated leads, and SMA connectorized housing with field removable connectors. Customizable with up to 5 throws, switches offer continuous RF input power to +30 dBm, dc nominal voltage of +5.0/-12 V, VSWR of 1.5:1, and operating temperature from -55 to +85°C.

Cree Inc.
Durham, NC 27703
Jun 26, 2008 Integrating GaN RF transistor technology, 5 W distributed amplifier, Model CMPA0060005 operates from DC to 6 GHz, while 25 W reactively matched Model CMPA2560025 operates from 2.5-6 GHz. Both MMICs are suitable for variety of applications where high power over broad bandwidths is required. Pair of CMPA2560025s, driven by CMPA0060005 can provide over 40 dB gain with output power up to 50 W in 2.5-6 GHz band.

Linear Corp.
Carlsbad, CA 92009
Jun 26, 2008 Designed for multipoint gate and door entry systems, ACT-31D (single-button) and ACT-34D (4-button) TRANS PROX(TM) radio transmitter and Wiegand access control enable users to carry one product on key-ring to enter buildings through multiple entry points. Radio control transmitter is compatible with Linear telephone entry systems, multi-door access controllers, and gate receivers, while proximity access is compatible with Linear's AM-PR proximity reader in 26-bit Wiegand format.

Coiler Corporation
Taipei Hsien   Taiwan
Jun 19, 2008 Dual Band Repeaters integrate combination of GSM 900, DCS 1800, and UMTS repeater systems into single unit. Available in 2 models based on SB Pico and BR Mini repeaters, they can amplify 2 systems simultaneously with single device. Units can boost RF signals for 1 or 2 non-continuous frequency segments on GSM and DCS networks, and within 10 or 15 MHz ranges on UMTS networks, allowing carriers with non-adjacent frequencies to amplify up to 4 frequency segments at once.

SL Power Electronics
Ventura, CA 93003
Jun 18, 2008 Measuring 3 x 2.1 x 1 in. and weighing 2.05 oz, LS15 series is available in 3 voltages with power range up to 15 W. Suited for wide range of commercial applications including IP telephones, wireless network access points, security cameras, and IP print servers, each model can operate at 90% efficiency in 24 V unit. IEEE 802.3af compliant product offers thermal, short-circuit, overload, input shutdown, and surge protection, as well as under- and over-voltage lockout.

Endwave Corporation
San Jose,, CA 95134
Jun 17, 2008 Targeting short-range indoor communications that must transport data traffic at multi-gigabit speeds, 60 GHz T/R module allows full-duplex operation with flexible modulation and can also be operated in various radar modes. It features receiver noise figure of 5 dB and transmitter output power (at P1 dB) of over +5 dBm with ±1.0 dB flatness over 2 GHz operating bandwidth. Measuring 3½ in. in length, transceiver includes independent Tx and Rx local oscillators and programmable phase lock loops.

Micrel Inc.
San Jose, CA 95131
Jun 11, 2008 Model SY89610L takes in selected frequency clocks between 19-694 MHz and outputs selected frequency with low jitter, typically 1 psec rms. Device input accepts ac- or dc-coupled differential signals such as LVDS, LVPECL, and CML, and incorporates LC Tank VCO and auto-tune circuit that optimizes signal performance. Available in 32-pin MLF® package, applications include SONET/SDH, 10GeB FEC, 10GeB LAN PHY, and add-drop MUXs.

Fil-Coil Filters
Central Islip, NY 11722
Jun 06, 2008 Mounted through outer wall of shielded enclosure, Series FCP power line penetration filters are RFI-secure and supplied with threaded nipple. Products are supplied with bleeder resistors to prevent shock hazards and can withstand 140% of rated current for 15 min without any deterioration. Providing specified insertion loss of 100 db min over indicated frequency range, series filters from 60-400 Hz with 100 db attenuation from 14 KHz to 10 GHz and 100 KHz to 10GHz.

Instruments For Industry, Inc.
Ronkonkoma, NY 11779
Jun 05, 2008 Measuring 5.25 in. high and weighing 45 lb, SMC Ruggedized Microwave Amplifiers incorporate Traveling Wave Tube (TWT) technology and feature noise quieting as standard. Products are rated from 400 MHz to 1.0 GHz, 200 W, and suit outdoor mobile as well as fixed applications. Versions are also available in other frequency ranges to meet customer requirements.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jun 03, 2008 Designed for CDMA handsets where multiple transceiver or GPS functions are connected to common antenna, MASW-008853 has typical insertion loss at 1.0 GHz of 0.30 dB with isolation of 25 dB and P0.1dB of 38 dBm. It is fabricated on 0.5 micron gate-length GaAs process and features full passivity. Offering low leakage current, unit maximizes system linearity performance, while reducing dc power consumption. Each switch is RF tested to ensure performance compliance.

Advantech Automation Corp.
Cincinnati, OH 45240
Jun 02, 2008 Connected between Ethernet device and PoE powered connection, EKI-2701PSI operates as splitter, separating PoE connection into standard RJ45 Ethernet port and removable screw terminal block capable of supplying 13 W at 24 Vdc. Packaged in thin DIN-rail mount chassis, ruggedized device provides 4,000 Vdc Ethernet ESD protection, 3,000 Vdc power line surge protection, power isolation, and output power short circuit protection. Operating temperature range is -40 to 75°C.

Phihong USA
Fremont, CA 94539
Jun 02, 2008 Suited for WiMax and multi-radio access points, POE45-120 Series Gigabit-compatible splitter divides power and data, and converts PoE source to regulated dc power source. Available in non-vented case with 10-, 100-, and 1000BASE-T data rates, it works with 100 m cat5 cable, and has LED power indicator. Featuring output voltage of 12 V, device is isolated from PoE source by 1,500 Vac. Unit has full OCP-, and OVP- protection, and meets UL LPS and SELV output requirements.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jun 02, 2008 Able to detect signals from -75 dBm to +10 dBm at 2.14 GHz, LT5538 measures RF power over frequency range covering 800-900 MHz and 1.7-2.2 GHz cellular bands as well as 2.6-3.5 GHz WiMAX bands. Solution operates with single-ended RF input, requires no external RF transformer, and offers dc output voltage that is log-linearly proportional to input power level. Accuracy and linearity is ±0.8 dB, and response time is characterized by 100 ns rise and 200 ns fall times.

AverMedia Technologies, Inc.
Milpitas, CA 95035
May 28, 2008 With 54 mm AVerTV Hybrid NanoExpress, users can receive HDTV, analog TV, or FM radio on any Windows XP or Vista laptop. Slim-fit design inserts completely into ExpressCard slot, leaving no protrusion of unit outside. Accompanying AVer MediaCenter software enables watching and recording of programs from unencrypted Clear QAM digital cable TV and FM radio. Optimizing HDTV support up to 720p/1080i, tuner comes with foldable antenna with high reception capability.

Quintech Electronics and Communications Inc.
Indiana, PA 15701
May 23, 2008 Featuring 64 x 64 RF matrix in 6 RU, Model QE3 has operating frequency range covering both IF 50-200 MHz and extended L Band 950-2,500 MHz. Hot-swappable component cards enable replacement without any special tools or disconnecting any cables, and dual hot swappable power supply offers redundancy in powering. RF level at inputs and outputs is monitored to enable trouble shooting network interfaces, while programmable AGC and attenuation on inputs allows user to adjust input signal level.