Electro Industries/Gaugetech    Westbury, NY 11590
May 22, 2012 Supplied in NEMA 12 enclosure, Shark® meter assembly comes pre-wired and configured in either 120 or 277 V (for 277/480 V systems) configuration and is suited for use as retrofit solution in environments where there is no available metering compartment. Assembly can be mounted and wired next to existing switchgear and is available with Shark 100 power and energy meter; Shark 100B, with native BACnet/IP protocol; or Shark 200, with data-logging and I/O.

AEMC Instruments    Foxborough, MA 02035
May 02, 2012 Capable of measuring insulation resistance from 1 kW to 4,000 MW, Model 6527 offers insulation test voltages of 250, 500, and 1,000 V. Unit also serves as multimeter with AC/DC voltmeter capable of measuring up to 600 Vac and 1,000 Vdc, continuity test function with audible beeper for resistances under 35 W, and overload protection of 600 Vrms. Housed in over-molded case with back-stand and dual display, meter includes TEST LOCK feature for timed measurements up to 15 min.

CAS Data Loggers    Chesterland, OH 44026
Apr 04, 2012 With Electrocorder EC-7VAR Kit, users can view onsite power consumption in kilowatt hours, as well as identify voltage supply faults and power spikes. Three-phase meter is available in 4 models recording at amp ranges from 4 A to 3 kA. Using constant data sampling technique, logger samples each cycle multiple times for up to 300 days of continuous recording. All models include logger, 4 voltage leads, 3 Rogowski Coils, USB lead, software, and carrying case.

Keithley Instruments, Inc.    Cleveland, OH 44139 1891
Apr 03, 2012 Optimized for testing diodes, FETs, and IGBTs, Model 2657A High Power System SourceMeter® Instrument can source and sink up to 180 W of DC power at up to 3,000 V. Unit's 6½-digt measurement engine enables 1 fA current measurement resolution to support low-leakage requirements of power semiconductor devices. Model 2657A provides choice of digitizing or integrating measurement modes for characterizing both transient and steady-state behavior, including rapidly changing thermal effects.

Mini-Circuits    Brooklyn, NY 11235
Feb 23, 2012 Measuring 4.89 x 1.74 x 0.95 in., Model PWR-8FS turns Windows® or Linux® PC into power meter. USB Human Interface Device provides 10 msec measurement speed, dynamic range of -30 to +20 dBm, and frequency range of 1 MHz to 8 GHz. Built-in GUI measurement application software enables user to perform measurements on RF components such as couplers, filters, and amplifiers, as well as display numerical data and graphs.

Electro Industries    Westbury, NY 11590
Feb 14, 2012 Acting as BACnet server, Shark® 100B Meter seamlessly integrates with any BACnet building management system or application. Unit provides multifunction measurements of AC voltage, current, power, and energy with 0.2% Energy Class accuracy and 400+ samples per cycle rate. Designed to fit both ANSI and DIN cut-outs, Shark® 100B includes Web interface for remote BACnet/IP and Modbus configuration and tracking of energy readings through Internet via Web browser.

Omega Engineering, Inc.    Stamford, CT 06907
Jan 12, 2012 Suited for troubleshooting electrical circuitry and measurements in industrial control, Model HHM8229 combines temperature, relative humidity, sound, light, and digital multimeter in one unit. Device can perform measurements of AC/DC voltage and current, resistance, frequency, duty, and capacitance as well as continuity and diode test. Handheld portable meter features backlit LCD, auto power off, and audible/visual illuminated warning for correct input jack connections.

Saelig Co., Inc.    Pittsford, NY 14534
Dec 08, 2011 In Spectrum Analyzer mode, WiPry-Combo operates in frequency range of 2.400-2.495 GHz and measures signals from -40 to +20 dBm. When used in Dynamic Power Meter mode, device graphically displays RF power levels from 100 MHz-2.7 GHz. Actual power output can be triggered, captured, and recorded for protocol verification or for troubleshooting wireless devices. Collecting data at up to 12 MSa/s, WiPry-Combo logs data in csv format and can email screenshot results via iOS host phone.

Gigahertz-Optik Inc.    Newburyport, MA 01950 4009
Nov 25, 2011 Combining microprocessor and electronics in rack-mountable module, Model X1-RM provides linear current to voltage-to-current amplifier with 7 manually or automatically selected gain ranges. Maximum error within dynamic range is 0.2%. Four signal inputs operate in multiplex mode with 1 amplifier, while 4 additional analog voltage input channels enable meter to control additional detectors. Powered by 6-20 Vdc, Model X1-RM offers remote control operation via USB, RS485, or RS232 interface.

GE Co.    Southfield, MI 48034
Nov 17, 2011 Performing energy measurements accurate to within 0.2%, Multilin EPM 7000 is intended for applications requiring revenue metering, such as billing. Event and disturbance recording feature enables users to analyze power quality events over long periods of time, while historical data recording and logging capability lets customers retrieve archived data, capture past events, and analyze disturbances. Multiple communication ports are available for integration with DCS and SCADA systems.

Fluke Networks    Camarillo, CA 93010
Nov 16, 2011 Featuring 1-button interface, TS®100 PRO Cable Fault Finder with PowerBT(TM) Bridge Tap Detection is capable of testing entire length of average DSL cabling loop for bridge taps. Unit can detect taps to 3,200 ft as well as open/short circuits to 8,000 ft. In addition, tool includes AC/DC voltage detector, built-in toner, and SmartTone(TM) features for exact pair identification, making it suitable for fiber-to-the-node, fiber-to-the-curb, and copper network technicians.

Newport Corporation    Irvine, CA 92606
Nov 08, 2011 Suitable for fiber optic component production and testing, Model 1830-R features 7-segment, 4¼ digit backlit LED display that indicates W, dBm, dB, and relative measurement. Unit offers power sensitivities down to 10 pW and full scale readings up to 2 W. With audible beeping tone that changes frequency as function of incident optical power, meter is useful when optimizing optical beam alignment. Versions with USB 2.0 interface and additional IEEE-488 (GPIB)/RS232C outputs are available.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Oct 24, 2011 Water and dust resistant, U1273A Digital Multimeter optimizes measurement results with functions such as Smart Ohm, which minimizes readings from residual voltages induced by leakage currents. OLED display offers 2,000:1 contrast ratio for optimal indoor viewing through 160°. Enabling safe measurements of electrical current in 400-600 A range, U1190 Series Clamp Meters include wire separator and hook that technicians can use to select tangled cables under adverse conditions.

Maxim Integrated Products    Sunnyvale, CA 94086
Oct 13, 2011 Equipped with 2 communications sockets for independent NAN and HAN interfaces, Newport Evaluation Platform integrates 71M6541 energy-metering SoC that provides 0.1% accuracy across current range of 2,000:1. G3-PLC chipset, which includes MAX2991 and MAX2992, features adaptive tone mapping, notching, and robust mode to ensure communication in noisy conditions. MAXQ1050 secure microcontroller supports advanced and scalable encryption standards and protects against physical attacks from hackers.

Locus Energy    New York, NY 10018
Oct 13, 2011 Combining power meter and data logger, LGate 310 operates with web-based Locus Platform, which provides overview dashboard and analytics, enabling solar fleet operators to gather data for troubleshooting, asset optimization, and performance guarantee/billing functions. System features Itron Sentinel® 3-phase revenue-grade socket meter, inverter-direct communication and fault detection, communication via Ethernet or cellular networks, and plug-and-play connectivity with remote firmware upgrades.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Sep 20, 2011 Accommodating engineers in aerospace/defense, electronic manufacturing, and automotive industries, M9181A measures common parameters such as DCV, DCI, ACV, ACI, and 2- and 4-wire resistance. This 6½ digit PXI DMM offers 90 ppm basic DCV and 800 ppm basic ACV one-year accuracies and inputs up to 200 V. Compatible with PXI, PXI Hybrid, and cPCI® instrument mainframes, device comes with software that facilitates integration regardless of PC software environment.

Yokogawa Corp. Of America, Meter & Instrument Div.    Newnan, GA 30265
Aug 19, 2011 Combining basic functionality of clamp-on tester, digital multimeter, and power monitor, Model CW10 provides initial diagnosis of maintenance and electrical issues before more sophisticated equipment may be required. Technicians can measure 600 Aac/dc, 1,000 Vac/dc, 600 kW ac/dc, power factor, THD, harmonics, resistance, and frequency. In addition to 3.5-digit display with bar graph, meter includes joystick that lets user select preferred diagnostic function.

GAO RFID Inc.    Toronto   Canada
Jul 01, 2011 With measurement range up to 5 km, Model A0870002 performs end-to-end fiber identification, detecting breaks and micro-bends, even through jacketed fibers. Unit offers wavelengths from 640-660 nm and spectral width of less than 5 nm. Optical connectors include FC and Universal 2.5 mm adapters. Operating for 30 hours with single battery charge, Model A0870002 is suited for fiber optic network maintenance in telecommunications and CATV systems.

Schweitzer Engineering Laboratories Inc.    Pullman, WA 99163
Jun 01, 2011 Providing IEC and ANSI 0.2 Accuracy Class billing data, Model SEL-735 includes waveform capture, harmonic measurements, and data logging function. Advanced model additionally features high-order harmonics, sample rates, detailed power quality reports, and Ethernet. Integration with energy management software from SEL and others helps users cut energy bills.

Newson Gale, Inc.    Lakewood, NJ 08701
May 31, 2011 Suited for use in applications involving combustible or explosive atmospheres, Model ISDMM provides confirmation of low-resistance path to verified ground points and confirms integrity of existing bonding/grounding conductors. Unit also provides readings of DC voltage and amperage, capacitance, frequency, temperature, duty cycle, and pulse width. Also providing event count, product is equally adapted to use with permanently bonded equipment or temporary devices.