Optical Multiplexers

Communication Systems & Equipment, Optics & Photonics

SWDM Alliance Formed to Support Duplex Multimode Fiber for Enterprise and Data Center Applications at 40 and 100 Gbps

September 24, 2015

Organization to drive industry-wide adoption of Shortwave Wavelength Division Multiplexing (SWDM) technology, leveraging data center operators' investments in duplex multimode fiber infrastructure SUNNYVALE, CALIF. – Nine companies today announced the formation of an interest group to drive cost-effective utilization of duplex multimode fiber (MMF) infrastructure in cloud and enterprise... Read More

Communication Systems & Equipment, Optics & Photonics

Gould Fiber Optics: Expanding its Product Portfolio of Micro Optic Components to Now Offer Multimode Fiber WDM

February 6, 2014

Millersville, MD, USA — Gould Fiber Optics, a leading worldwide manufacturer and supplier of premium passive fiber optic components, planar components and integrated modules, is expanding its product portfolio. Gould is now offering a new line of Micro Optic based Multimode fiber WDM component for 1310/1550nm channels. The WDM's high channel isolation, low insertion loss and flat response over... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Sumitomo Electric to Showcase Optical Mux/Dmux Integrated TOSA/ROSA for 100GLR4 at OFC 2013

March 27, 2013

ANAHEIM, Calif. -- Sumitomo Electric Industries, Ltd., a leading global provider of advanced optical solutions, announced today that it will showcase its optical multiplexer/de-multiplexer integrated TOSA/ROSA for 100G-LR4 in CFP4 modules at OFC/NFOEC which is taking place 17-21 March 2013, at the Anaheim Convention Center, Anaheim, CA, USA. The TOSA and ROSA both use low-loss optical multiplexer... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics

AEPONYX Showcases Easiest and Most Future Proof WDM-PON Solution with 40 Channels on a Single Fiber at OFC/NFOEC 2013

March 19, 2013

BREA, Calif., MONTREAL and DAEJEON, South Korea - AEPONYX inc. will be showcasing at the OFC/NFOEC2013 Exposition in Anaheim on March 19-21, 2013 the industry's easiest and most future proof, long-reach, single fiber, 40 channels WDM-PON solution. AEPONYX has achieved another world first; a truly standalone single fiber WDM-PON Solution composed strictly of WDM-PON Passives and small form... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics, Test & Measuring Instruments

Multiplexer Appliance supports OC-3 and STM-1 standards.

September 5, 2012

Providing up to 84 T1 spans or 63 E1 spans, Model STM1-Mux offers capacity to connect 2,016 simultaneous calls. Unit supports direct cable connection with A116 high density digital telephony board, eliminating cross-connect wiring for each group of 16 E1/T1 spans terminated in high-density deployments. Combined with other Sangoma solutions supporting SS7 and SIP signaling and multiple... Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Exar Demonstrates MXP2 OTN Muxponder Solution at Ethernet Expo Americas 2011

November 22, 2011

Industry's First Any Service, Any Port, Single-Chip Solution to Offer Latest OTN Features FREMONT, Calif., Nov. 3, 2011 - Exar Corporation (Nasdaq: EXAR) will demonstrate MXP2's any service, any port, single-chip OTN muxponder solution at the Ethernet Expo Americas Conference in New York City, booth #315. MXP2 provides a more efficient means of transporting a variety of traffic, including... Read More

Communication Systems & Equipment, Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

OTN Muxponder enables development of any service-any port line cards.

July 25, 2011

Designed to help future-proof networks, Model MXP2(TM) ASSP is targeted at ROADM/DWDM and Edge Aggregation platforms in OTN transport applications. Device enables development of any service-any port line cards and consolidation of service specific muxponders into single universal design. Eight watt, 2 x 10G single chip solution includes G.709 features such as ODU0, ODUflex, and GMP, enabling... Read More

Communication Systems & Equipment

Vtesse Deploys Tellabs to Expand UK National Private Fiber Optic Network

June 20, 2011

Tellabs 7100 system offers essential rapid bandwidth provisioning HIGH WYCOMBE, United Kingdom - Vtesse, a leading provider of advanced national fiber optic networking services in the United Kingdom, has selected Tellabs as a key provider of optical equipment for its national network. Vtesse is deploying the Tellabs® 7100 Nano(TM) Optical Transport System to support the expansion of its metro... Read More

Communication Systems & Equipment, Optics & Photonics

Fiber Optic Multiplexers operate in UV region of spectrum.

March 21, 2011

Providing rapid switching between single UV spectrometer and up to 16 sampling points, FMX-200U Series is suited for pharmaceutical dissolution monitoring as well as analysis of aromatic compounds and other strongly absorbing chromophores. Multiplexers utilize pair of retro-reflecting switching prisms to switch both transmitted signal from spectrometer and signal returning to optical detector.... Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Tellabs Boosts Its OTN Offering

March 18, 2011

Tellabs® 7100 system reduces transport network cost and enhances customers' service offerings with high-capacity OTN switching NAPERVILLE, Ill. -- Driven by high-speed Internet, high-definition video, and business services, network traffic keeps growing exponentially, forcing service providers to add more and more bandwidth while reducing cost to maintain profitability. Now, service providers... Read More

Communication Systems & Equipment

DiCon's MEMS Split and Select Paves a New Road to Directionless ROADM Network Management

March 10, 2011

Richmond, CA - DiCon Fiberoptics' MEMS Split and Select paves a new road to directionless traffic management in ROADM networks. Optical splitters simultaneously broadcast incoming signals to an array of DiCon's well-recognized MEMS 1xN Switches. As each switch selects from all the signals, any signal can be routed to one or more output ports. The signals may be directed through the switches to... Read More

Communication Systems & Equipment

Tunable Demux offers colorless demultiplexing in ROADM networks.

March 2, 2011

Equipped with MEMS Tunable Filters, 4-channel MEMS Tunable Demux allows both wavelength selection and signal continuation. After multi-wavelength input signal is broadcast to filter, MEMS mirror tilts precisely to tune single wavelength channel to output fiber. Featuring Gaussian-shaped pass-band optimized for 50 or 100 GHz channel spacing, MEMS mirror provides ±50 pm wavelength setting... Read More

Communication Systems & Equipment, Optics & Photonics

Coarse Wavelength Division Multiplexer (1×2) Packed with Rich Features

December 3, 2010

Toronto, Canada - GAO Tek Inc. (www.GAOTek.com) has rolled out its coarse wavelength division multiplexer (CWDM) appropriate for use in WDM networks, telecommunications, cellular applications, fiber optic amplifiers and access networks. The multiplexer utilizes thin film coating technology and is characterized by low insertion loss, high channel isolation, wide passband, low sensitivity to... Read More

Communication Systems & Equipment, Optics & Photonics

Multichannel CWDM is optimized for stability, repeatability.

November 24, 2010

Eight-channel Coarse Wavelength Division Multiplexer features epoxy-free optical path, 20 nm channel spacing, and 300 mW power handling capabilities. Operating wavelength is 1,260-1,620 nm, with ±0.5 nm center wavelength accuracy. In addition to line monitoring, WDM networks, and CATV networks, intended applications include power distribution, FTTX, test equipment, and telecommunication... Read More

Communication Systems & Equipment, Optics & Photonics, Test & Measuring Instruments

CWDM utilizes thin film coating technology.

June 25, 2010

Operating over wavelength of 1,510-1,610 nm with 20 nm channel spacing, Coarse Wavelength Division Multiplexer maximizes existing fiber optic infrastructure by transmitting multiple wavelength signals through same fiber optic cable. Unit enables dual fiber strand to support multiple network topologies and data rates. Encapsulated within non-flux metal bonding micro optic packaging, CWDM has... Read More

Communication Systems & Equipment

Optical Add/Drop Multiplexer offers 40 Gbps coherent optics.

June 10, 2010

Deployed in telecom carrier and cable operator networks, FLASHWAVE® 7500 ROADM offers complete optical hubbing and transport solution to support core network consolidation, metro/regional capacity relief, and triple-play service delivery. ANSI and ETSI configurations are available for supporting networks up to 1,200 km, up to 24 add/drop nodes per network, and capacity to 1.6 Tbps. Also, 40... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics, Test & Measuring Instruments

Optical Communications Switch/Multiplexer suits extreme environments.

June 9, 2010

Able to operate as OC-48 SONET multiplexer and/or GbE switch, SEL ICON (Integrated Communications Optical Network) features precise time distribution accurate to 1 µs over WAN. It also offers real-time latency monitor for each channel and support for SONET, Ethernet, and DS0 interfaces such as C37.94 and EIA 232. Product can be managed from one or several locations and is available in 19 in.,... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Optics & Photonics, Test & Measuring Instruments

'Made-in-the-USA' Fiber Optic Line Delivers Cost-Effective Performance

May 7, 2010

Danbury, CT. April 21, 2010, ComNet, Communication Networks of Danbury, Connecticut, a leading manufacturer of fiber optic transmission and networking equipment, is introducing the ValueLine to satisfy the demand for a cost-effective line of fiber optic and Ethernet transmission products. The line consists of digitally encoded fiber optic video multiplexers, serial data products, Ethernet media... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Add-Drop Multiplexer supports ODU0 and ODU1 connectivity.

January 15, 2010

Single-chip OTN add-drop multiplexer, TPO114, offers up to 2.5 Gbps bandwith and built-in lower ODU cross connect. Device supports efficient any rate to OTN mapping, including standards-compliant GE to ODU0. In addition to G.709 OTN mapping and framing, features include flexible, any rate, any protocol client ports; built-in ODU ADM for sub-wavelength networking; and standard FEC. Support is... Read More

Communication Systems & Equipment, Optics & Photonics, Test & Measuring Instruments

Multiplexers target high-density CCTV applications.

June 1, 2009

Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages,... Read More