Fiber Optic Splitters

Communication Systems & Equipment, Optics & Photonics

PM Fused Fiber Couplers/Splitters support ±50 nm operation.

February 6, 2015

By leveraging Fused Biconically Tapered (FBT) wavelength flattening technology, Ultra Broadband Polarization Maintaining (PM) Fused Fiber Couplers/Splitters support operation over bandwidths up to ±50 nm for polarization maintaining fibers (including Panda and Bow-Tie). These products support builds of expanding global imaging and sensor markets utilizing broader wavelength bandpass with highest path-matching accuracy for optimal system performance. Read More

Communication Systems & Equipment, Optics & Photonics

Fiber Couplers/Splitters support wide temperature range.

February 6, 2015

With fused biconically tapered platform, Sub-Zero Polarization Maintaining Fused 125 µm and 80 µm Fiber Couplers/Splitters operate from -55 to +85°C, without significant changes in Polarization Extinction Ratio. Components are small in size with low excess loss, optimal uniformity, and high directivity. Built to mil-aerospace standards and available in various split ratios, devices are suited for fiber gyros and sensors, instrumentation, harsh environment DTS and smart structures. Read More

Communication Systems & Equipment

Power Splitters work with low PIM in-building DAS antennas.

March 27, 2014

Respectively, DASSPLIT2WNF/3WNF/4WNF are 2-, 3-, and 4-way power splitters with N female connectors. Also available, DASSPLIT2WDIN 2-way power splitter has female 7 16 DIN connectors. Each of these products work with PIMinator low passive intermodulation (PIM) indoor distributed antenna system (iDAS) series to ensure PIM spec of -155 dBc at 2 x 20 W in buildings where multiple antennas are present to promote data rates as well as minimize dropped calls and other cellular phone issues. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Communication Systems & Equipment, Electronic Components & Devices

HDMI Splitter/Extender drives up to 8 displays.

February 12, 2014

Consisting of VOPEX-C6HD-8LC HDMI broadcast unit and ST-C6HD-R-130LC remote unit for each remote display, Splitter/Extender simultaneously distributes video and audio signals from HDMI source to up to 8 HDMI displays located up to 130 ft using CAT6 cable. Unit supports HDTV resolutions to 1080p and computer resolutions to 1920 x 1200. HDMI features include: 8- and 12-bit Deep Color; bandwidth up to 225 MHz (6.75 Gbps); LPCM 7.1 Channel, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio. Read More

Machinery & Machining Tools, Communication Systems & Equipment, Optics & Photonics

Couplers and Signal Splitters target OCT systems.

February 5, 2014

Wideband and UltraBand Fiber Optic Couplers and Optical Signal Splitters now include fused single mode models with bandwidths of ±100 nm, ±150 nm, and beyond as well as polarization maintaining units with bandwidth up to ±50 nm. Small and insensitive to operating wavelengths, products are suitable for use in instrumentation, OCT imaging systems, and CATV distribution. By selecting proper fiber type, devices can be optimized to work from visible range up to L band. Read More

Communication Systems & Equipment, Optics & Photonics

Fiber Coupler/Splitters feature fused biconical tapered process.

March 22, 2013

Built on fused biconical tapered (FBT) process and proprietary packaging platforms, 1X3 polarization maintaining (PM) truly-fused fiber coupler/splitters offer high extinction ratio with polarization launch into single- or dual-axis (slow axis and fast axis). Tests have shown PER of greater than 18 dB and uniform split ratios. Harsh-environment resistant products are suited for use in fiber communication systems, gyroscopes, aerospace, laser, sensor, test, and measurement applications. Read More

Computer Hardware & Peripherals, Communication Systems & Equipment

Automated ODF adapts PON splitting ratios to growth.

July 30, 2012

Featuring adaptive splitting capabilities, PON-AODF(TM) Automated Optical Distribution Frame upgrades Passive Optical Networks to be adaptable to service penetration and bandwidth demand changes. System preserves optical links during power loss or maintenance, and supports remote service provisioning and remote network testing. Implementing PON-AODF gives service providers flexibility to install only as many OLT ports as needed to serve connected homes. Read More

Communication Systems & Equipment

Central Office Splitter Modules operate from -40 to +85°C.

July 23, 2012

Designed for use on rack card in DSLAM or within roadside cabinets, BX8841NL SmartER(TM) CO Splitters comply with ETSI TS 101-952-1-1 Option A specification for 600 W impedances, for ADSL to VDSL2 bands, and China's YD/T 1187-2006 specification for 600 W impedance for ADSL2+ band with provision for metering at 12 kHz and 16 kHz. In addition, modules are compliant with Broadband Forum TR-127 for VDSL2 applications, ensuring optimum delivery of voice, data, and video services. Read More

Communication Systems & Equipment

Fiber Optic Splitters are designed for long-term stability.

June 6, 2011

Designed as monolithic components for telecom wavelength range, Planar Lightwave Circuits (PLCs) include single-mode 1 x N and 2 x N broadband splitters with up to 64 channels. Products are primarily used in passive optical distribution networks in subscriber loop of telecommunication networks (FTTH). Other applications of RoMack splitters are measuring systems, laser systems, and special PLCs with optical functions. Read More

Communication Systems & Equipment

MEMS Optical Splitter is suited for ROADM networks.

March 11, 2011

MEMS Split, Select, and Drop delivers colorless and directionless capabilities to ROADM networks. It simultaneously broadcasts multi-wavelength input signals through array of MEMS 1xN Switches, which offer switching time of less than 20 ms, and MEMS Tunable Filters. These feature ±50 pm wavelength setting accuracy within C or L Bands and tuning speed of less than 30 ms. Available with 4 channels, splitter can be scaled to any number of channels and suits metro and regional optical networks. Read More

Communication Systems & Equipment, Optics & Photonics

Fiber Optic Couplers/Splitters minimize bend loss. .

November 9, 2010

Utilizing Bend Insensitive Singlemode Glass and HLC connections, SM Fiber Optic Couplers/Splitters include all standard connector types and packages and can be customized for various split ratios and lengths. HLC SCRATCHGUARD® connection technology combined with bend insensitive glass minimizes bend loss, insertion loss, optical return loss, and endface scratching/contamination. Read More

Communication Systems & Equipment, Optics & Photonics

Fiber Optic Coupler/Splitters serve variety of applications.

February 17, 2009

Available in 1 x 2, 1 x 3, 1 x 4, 1 x 8, 2 x 2, and 2 x 4 configurations with all industry standard fiber optic connectors, Polarization Maintaining coupler/splitters either combine 2 or more signals into one or split one signal into multiple paths. They support 1,550, 1,310, 1,060, 980/960, 780, and 633 nm wavelengths. Customizable units are offered in either ruggedized plastic housing with 3 mm leads or low profile stainless steel tube for high density equipment requirements. Read More

Communication Systems & Equipment, Optics & Photonics

Coupler/Splitters suit single mode fiber optic applications.

July 1, 2008

Standard single mode coupler/splitters are used to either combine 2 or more signals into 1 or split 1 signal into multiple paths. They come in 1 x 2, 1 x 3, 1 x 4, 1 x 8, 1 x 16, 1 x 32, 2 x 2, and 2 x 4 configurations with LC, SC, FC, and ST fiber optic connectors and polishes. Each unit is offered in either ruggedized plastic housing with 3 mm leads or low profile stainless steel tube for high density equipment requirements. Read More

Communication Systems & Equipment

Splitter Module suits Gigabit passive optical networks.

October 17, 2007

Interchangeable across all OptiTect(TM) Gen III Local Convergence Cabinets, 1 x 64 Splitter uses Corning® SMF-28e® XB fiber to offer field-hardened solution. It is designed to meet Telcordia GR-1209-CORE and GR-1221-CORE, and utilizes GR-326 certified SC APC or SC UPC connectors. Read More

Communication Systems & Equipment, Optics & Photonics

Fiber Optic Products suit military/industrial applications.

October 9, 2006

Based on Canstar(TM) technology, FCI Fiber Optics product line is comprised of fiber optic multimode/single-mode couplers, splitters, taps, wavelength division multiplexers (WDMs), cable assemblies, and adaptors. Couplers are offered for various design specifications, including one-in, many-out couplers; WDMs; and one-in, 2-out couplers available as even- or ratio-split. FCI attenuators, or one-in, one-out couplers for attenuating all wavelengths, are also available. Read More

Communication Systems & Equipment

Ruggedized Splitter offers Outside Plant fiber connectivity.

June 14, 2006

APACN ruggedized splitter withstands temperatures from -55 to +85°C and provides fiber protection, management, and maintenance in FTTx deployments. One-touch turn-up design allows output legs to be handled only during customer turn-up, reducing human handling. As component of Fiber Scalability Center Outside Plant cabinets, splitter supports one 1 x 32, two 1 x 16, or four 1 x 8 configurations without penalty in real estate or port counts. Read More

Communication Systems & Equipment

Splitters and DWDM Components suit passive optical networks.

January 24, 2003

Outside plant (OSP) splitters offer re-enterable closures for node scalability. LGX® module splitters integrate into existing optical shelves in central office and head-end of optical access network. Design permits accessibility to network ports, while providing network modularity with pluggable modules. Arrayed Waveguide Grating DWDM MUX/DMUX has insertion loss of less than 3.5 dB and 40 channels set on ITU 100 GHz channel spacing. Read More

  • 1