Bosch Security Systems    Fairport, NY 14450 9199
Feb 08, 2010 Suitable for town halls, local business centers, and courtrooms, CCS 900 Ultro Discussion System includes Digital Acoustic Feedback Suppressor technology to assure speech intelligibility and Possible-to-Speak function, which gives visual indication when microphone is available. Control Unit can record and play back up to 64 hr of discussion using 2 GB SD card. Expanding to up to 150 units, system enables 1-4 microphones to be active simultaneously, with chairman always having speaker priority.

u-blox AG    Schweiz   Switzerland
Feb 05, 2010 Featuring idle-mode power consumption of less than 2 mA and operating voltage of 3.2-4.5 V, LUCY Wireless Modules support tri-band UMTS/HSDPA and quad-band GSM/GPRS/EDGE class 12 with embedded TCP/IP stack and SSL client. Modules include assisted GPS client for on- and off-line telematics applications, and come in 45 x 37.5 x 4 mm package with 60-pin board-to-board connector. Supporting both voice and data, modules require only external antenna.

ProSoft Technology Inc.    Bakersfield, CA 93311
Feb 05, 2010 Combining Rockwell Automation's I/O with ProSoft's Integrated Wireless Architecture(TM) technology and support, ILX34-AENWG Wireless POINT I/O Adapter offers wireless alternative for linking Rockwell Automation® controllers to distributed process I/O modules. Device can be used in networks with RadioLinx® Industrial Hotspots or third party 802.11g access points to provide high-speed, low latency 802.11g client communication over widely spaced plant areas.

Maxim Integrated Products    Sunnyvale, CA 94086
Feb 04, 2010 Supplied in 7 x 7 mm TQFN package, MAX2135 receives signals in VHF-low, VHF-high, and UHF bands and integrates 2 signal paths that operate from one fractional-N synthesizer. Each path's output consists of 4 MHz, low-IF signal that interfaces to most demodulator ICs, and on-chip lowpass filters that accommodate 4, 6, 7, and 8 MHz signal bandwidths make device suited for receiving ISDB-T and DVB-T broadcasts. UHF noise figure is 3.8 dB typ, and power consumption ranges from 330-200 mW.

Moxa Inc.    Brea, CA 92823
Feb 04, 2010 Supplied in metal housing, ICF-1170I series secures data transmission by using fiber optic transmission up to 2 km to provide complete isolation and protection against EMI. Fiber Test Mode feature facilitates testing of transmission status by activating DIP switch and displaying signal status via LEDs. Supporting up to 1 Mbps transmissions, product also features redundant power input and relay function to help maintain continuous operations even during power interruptions.

Moxa Inc.    Brea, CA 92823
Feb 04, 2010 VPort 461 single-channel industrial video encoder provides up to 3 full D1 video streams in H.264 and MJPEG format simultaneously, with latency of less than 200 msec. It enables remote users to access video on web browser. Featuring temperature range of -40 to +75°C and IP30-rated metal housing, device offers two 10/100 Mbps Ethernet ports for cascading multiple units and SD card socket with up to 32 GB of storage. Product also allows PTZ control via RS-232/422/485.

ProSoft Technology Inc.    Bakersfield, CA 93311
Feb 04, 2010 Providing 1 W of transmit power, 2.4 GHz Model RLX-IFH24E supports distances up to 15 miles, while 900 MHz Model RLX-IFH9E supports distances up to 30 miles, if operating with point-to-point connection, high-gain directional antennas, and clear line of sight. License-free radios offer speed of 1.1 Mbps to support large networks and industrial Ethernet, including EtherNet/IP and Modbus TCP/IP. Serial port enables radios to act as RS-232/485 serial device server.

Z-Communications, Inc.    San Diego, CA 92126
Feb 03, 2010 Operating at 6,520 MHz, SFS6520A-LF offers typical phase noise of -90 dBc/Hz @ 10 KHz offset and typical sideband spurs of -65 dBc. This RoHS-compliant, C-band product delivers typical output power of 6 dBm with VCO voltage supply of 5 Vdc while drawing 40 mA (typ) and phase locked loop voltage of 3 Vdc while drawing 11 mA (typ) over -40 to +80ºC range. Featuring typical second harmonic suppression of -20 dBc, synthesizer comes in 0.60 x 0.60 x 0.13 in. package.

RADWIN    Tel Aviv 69710  Ireland
Feb 03, 2010 Offering up to 16 x E1s/T1s+ Ethernet, RADWIN 2000 PDH meets carriers' cellular backhaul needs concerning performance, capacity, and range. Technologies such as MIMO, OFDM, and Diversity, together with unique protocols, ensure robustness and resiliency in sub-6 GHz bands. Providing flexible combination of native TDM and Ethernet, carrier-class product comes with 1+1 Monitored Hot Standby support and built-in Spectrum View for locating cleanest channel for operation.

AR RF/Microwave Instrumentation    Souderton, PA 18964
Feb 02, 2010 Offering power measurement range from -70 to +44 dBm, Model PM2003 delivers 200 readings/sec with 1 channel and 100 readings/sec when 2 channels are used. Two channels can be simultaneously displayed and recorded, while third channel can be switched in to be displayed or recorded. Meter offers wide dynamic range, which can extend to 90 dB when diode power heads are used, and to 50 dB with thermocouple heads.

Semrock Inc.    Rochester, NY 14624
Feb 01, 2010 Available in 25.2 x 35.6 x 2.0 mm sizes, VersaChrome(TM) bandpass filters offer tuning range of greater than 12% of normal-incidence wavelength and average transmission of greater than 90% with steep edges and wideband blocking. Applications include fluorescence microscopy, imaging, and quantitation, as well as spectral imaging. Due to their polarization insensitivity, optical quality, and damage threshold, filters are also suited for wide range of laser applications.

Synopsys, Inc.    Mountain View, CA 94043 4033
Feb 01, 2010 Targeting DTV and home theater applications, DesignWare® HDMI(TM) IP solution supports features of HDMI 1.4 specification, including HEAC 3D formats, real-time content signaling, 4 K x 2 K resolution, and 10.2 Gbps aggregate bandwidth. HEAC block facilitates connectivity between internet-enabled digital home devices by enabling transfer of Ethernet and audio frames through single HDMI cable. Real-time content signaling enables TVs to automatically optimize picture setting with no user intervention.

Tripp Lite    Chicago, IL 60609
Jan 29, 2010 Utilizing USB and/or PS/2 interface units and Cat5/Cat6 patch cables, Models B070-016-19-IP and B070-016-19 can manage servers up to 100 ft away. Both combine 19 in. monitor, keyboard, mouse, and 16-port KVM switch in slide-out 1U rackmountable housing. Model B070-016-19-IP features built-in IP capability for remote system monitoring and control from any location and supports 128-bit SSL and HTTPS, while Model B070-016-19 is IP upgradable with addition of IP Remote Unit.

Tripp Lite    Chicago, IL 60609
Jan 29, 2010 Designed to control multiple computers from single console, Models B020-U16-19-K and B020-U08-19-K combine 19 in. LCD monitor with 1,280 x 1,024 resolution, keyboard, mouse, and 8- or 16-port KVM switch in slide-out 1U rackmountable housing. Units come with eight P778-Series USB/PS2 Combo KVM Cable Kits that permit connection to either PS/2 or USB servers. By cascading additional B022-Series switches, up to 512 servers can be controlled.

RAYSPAN Corporation    San Diego, CA 92130-2543
Jan 29, 2010 Printed directly on PCB, retrofitted inside existing products, or integrated inside new devices, standalone metamaterial balanced (MTM-B(TM)) antenna completely replaces full-sized dipole antennas to enable WiFi routers and access points with internal antennas. It features 15 x 14 mm SFF and meets requirements for single- and dual-band (2.4 or 5.0 GHz) devices. In addition to noise immunity, antenna offers polarization along length to improve throughput and range.

Cuming Microwave Corp.    Avon, MA 02322
Jan 28, 2010 Suitable for cabinets and base stations, C-RAM MT Series consists of lightweight flexible foams with broad range of dielectric loss that will lower Q in cavities, attenuate surface currents, and absorb stray RF energy. Offering broadband performance, C-RAM AR Series reticulated foam is recommended for high humidity or moisture environments. Each is made with neoprene composition and is available in standard dimensions of 24 x 24 in., with larger sizes up to 72 in. also available.

Balluff, Inc.    Florence, KY 41042-0937
Jan 27, 2010 Fanuc miLink Tool ID interface is designed to interconnect and automate entering and tracking of tooling information to Fanuc-based CNC from Balluff RFID Tool ID system. Device is industrially hardened and does not require any ladder or macro programming. Tool ID system kits include serial communication-based RFID processor and RS232 communication cable to connect processor to miLink serial communication port. With Fanuc miLink interface and Balluff Tool ID, users can access all CNC data.

RADWIN    Tel Aviv 69710  Ireland
Jan 27, 2010 Incorporating MIMO and OFDM technologies, RADWIN 2000 C-Series provides up to 16 E1s/T1s + Ethernet on one platform at ranges up to 75 miles. Wireless radios offer Adaptive Asymmetric capacity whereby bandwidth is automatically allocated between uplink and downlink based on traffic loads and air-interface conditions. Supporting multiple frequency bands from 2.4-5.9 GHz, radios operate in non-line-of-sight scenarios, interference-ridden environments, and extreme temperatures.

Dicon Fiberoptics Inc.    Richmond, CA 94804
Jan 26, 2010 Measuring 25 x 16 x 8.5 mm, Visible MEMS 1xN Optical Switch is available in many configurations, can be made with standard or specialty fibers, and is suitable for integration in biomedical applications. Unit can operate anywhere from visible to near-infrared wavelength range with over 1 billion cycles and no failures. Other applications include fluorescence microscopy, OCT, and spectroscopy.

Taoglas    Chula Vista, CA 91914
Jan 26, 2010 Delivering over 40% efficiency in healthcare monitoring devices, FLA.01 Penta-band Cellular Antenna can conform to any shape or size and can be applied to any frequency including license-free bands such as 433 MHz, 868 MHz, 915 MHz, 2.4 GHz, and higher. With antenna, medical device designers can ensure their devices achieve consistent wireless connections for transmitting patient data and meet healthcare industry tests such as Specific Absorption Rates and PTCRB.