ITT Interconnect Solutions    Santa Ana, CA 92705
Dec 09, 2011 Featuring 24-spring probe and pad contact technology, Filter Spring Probe Series extends operating life of in-the-field military equipment. Technology creates electrical contact by utilizing pressure-point force on spring-loaded pin to contact pad, instead of sliding forces found on conventional pin socket contacts. Flush with mating face of connector, contact pad on receptacle side of connector can be cleaned by wiping interface, making interconnect suited for field applications.

CareFusion    San Diego, CA 92130
Dec 09, 2011 Consolidating variety of clinical and research features into single, portable unit, Nicolet(TM) EEG Wireless Amplifier captures high-resolution brain wave data for diagnosis and treatment of epilepsy, brain trauma, stroke, brain tumors, and sleep dysfunction. Real-time data from amplifier can be transferred wirelessly or in tethered mode and stored in on-board memory, allowing for continuous recording when patients are out of range of monitoring computer.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Dec 09, 2011 Available for single-mode or multimode fiber-optic connections, N7731A dual 1x4 optical switch and N7734A 1x13 optical switch promote effective optical transceiver manufacturing tests as well as efficiency in optical component and cable verification. Optical switches can be used in fiber-optic test systems to automatically route optical signals or in automated test equipment to provide repeatability and promote throughput by supporting parallel measurements on multiport devices.

ATEN Technology, Inc.    Irvine, CA 92618
Dec 09, 2011 Utilizing CAT5e cabling, CE600/CE602 KVM Extenders allow users to control server, computer, or KVM switch from remote console. Model CE600 supports video resolutions up to 1,920 x 1,200 at 60 Hz from distance of 30 m. For resolutions up to 2,560 x 1,600 at 60 Hz from 40 m, Model CE602 can be utilized when combined with second CAT5e cable for transfer of HDCP, RS-232, microphone, and dual-link signals. Hot-pluggable, rackmount units include built-in 8 KV/15 KV ESD protection.

Barix AG    8008 Zurich   Switzerland
Dec 09, 2011 Featuring 2 backlit push-to-talk buttons, volume control, as well as built-in speaker and microphone, Annuncicom PS1 Paging Station provides facilities with fully integrated hardware solution for paging and intercom over IP. Users can make announcements to entire facility, and IP addressability facilitates connection to existing network infrastructure. Also, PoE capability further simplifies installation, and system can merge with background music systems.

Pickering Interfaces Inc    GRANTS PASS, OR 97526
Dec 08, 2011 Available in un-terminated 4-way or 6-way multiplexer configurations, Model 40-874 supports 1 or 2 microwave switches in 2 slots of 3U PXI. Each configuration is available with 6, 26.5, or 40 GHz specified frequency range. Two-slot PXI occupancy allows test system designers to solve dense microwave switching problems. Compatible with any PXI compliant 3U PXI chassis, Model 40-784 is supported by Pickering Modular LXI chassis' for Ethernet-based control applications.

Saelig Co., Inc.    Pittsford, NY 14534
Dec 08, 2011 In Spectrum Analyzer mode, WiPry-Combo operates in frequency range of 2.400-2.495 GHz and measures signals from -40 to +20 dBm. When used in Dynamic Power Meter mode, device graphically displays RF power levels from 100 MHz-2.7 GHz. Actual power output can be triggered, captured, and recorded for protocol verification or for troubleshooting wireless devices. Collecting data at up to 12 MSa/s, WiPry-Combo logs data in csv format and can email screenshot results via iOS host phone.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Dec 08, 2011 Bringing wireless connectivity to MSP430(TM) MCU LaunchPad development kits, 430BOOST-CC110L RF BoosterPack includes ETSI-compliant and FCC-certified modules to help accelerate RF hardware design. Dual plug-in-boards with RF modules integrate TI CC110L sub-1 GHz RF value line transceiver, passive components, and compact PCB antenna. Operating in 868 and 915 MHz bands, RF module included on RF BoosterPack is separately available as ETSI-compliant and FCC-certified production-ready module.

AMDOCS    Jersey City, NJ 07311
Dec 05, 2011 Targeting mobile service providers, Amdocs Data Experience Solution integrates policy control and charging engine with product catalog and subscriber management functions as well as necessary business support, network interfaces, and preconfigured business processes to deliver out-of-the-box market offers. System supports pay-per-use access to data services, personal usage limit, up-sell capabilities, and common data quota that can be shared across family or enterprise.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Dec 02, 2011 Comprising SAW filter, power amplifier, and magnetic stabilizer in single 6.6 x 3.8 x 1.0 mm package, HFQPRAPCA Series supports Bands 5, 1, 25, and 13. Magnetic stabilizer, providing same function as isolator, enables modules to remain stable by controlling characteristics of load fluctuation caused by changes in impedance that can occur when user's hand, metal object, or other materials come close to antenna.

Banner Engineering Corp.    Minneapolis, MN 55441
Dec 02, 2011 Combining wireless transceiver, power supply, and I/O circuits in one housing, DX80DR connects sensors directly to network. This eliminates need for data loggers, power supplies, PLCs, or HMIs at sensor location, reducing ancillary equipment requirements at remote monitoring or control sites. Compatible with all industrial signals as well as specific instruments, radio allows real-time access to information. I/O terminals are provided along with RS485 Modbus RTU connection.

Laird Technologies    Chesterfield, MO 63017
Dec 02, 2011 Based on FlexRF(TM) technology, High Power LT1110 900 MHz wireless module permits unlimited clients to synchronize to single server for low-latency communications. Server and all clients in network can communicate with any radio in range via addressed or broadcast packets. Offering up to 24 dBM conducted output power, SMT and pluggable products are available with integrated antenna or U.FL for external antenna and provide wireless communications for point-to-point/-multipoint networks.

Mini-Circuits    Brooklyn, NY 11235
Nov 30, 2011 RMK series x3 frequency multipliers simplify LO generation in microwave point-to-point and point-to-multipoint systems by offering output frequencies to 15 GHz while utilizing common package and pin out. Also available, KSX Series X2 Frequency Multipliers function up to 20 GHz. LTCC-based circuits drive balanced diodes, creating miniature series of X2 passive multipliers that extend useful frequency range of oscillators and synthesizers.

Advanced Micro Peripherals    New York, NY 10001
Nov 30, 2011 Providing dual channel, H.264 encoder on PMC Mezzanine card, Model H264-ULL-PMC captures and compresses up to 2 analog video inputs at up to 1080p HD resolution to H.264/MPEG-4 AVC standard. Each channel can be independently configured for analog YPbPr HD, analog RGsB, or analog VGA. Operating over extended temperature range of -40 to +85°C, HD card is suited for real-time control, UAV applications, traffic monitoring and control, digital video recording, and remote video surveillance.

Oclaro, Inc.    San Jose, CA 95134
Nov 29, 2011 MSA-compliant MI 8000XM employs PM-QPSK modulation format combined with coherent detection. Latter delivers scalability and flexibility needed for effective, efficient bandwidth transmission over fiber optic networks. Also included, low-power digital signal processor large-scale integrated (DSP-LSI) circuit offers correction of chromatic dispersion as well as polarization mode dispersion. Soft-decision forward error correction (SD-FEC) also enhances operation.

PREMO Group    Barcelona   Spain
Nov 28, 2011 Suited for applications with max operating voltage up to 720 Vac, HCWMGF Series comes in 3-phase versions L1, L2, and L3 (without neutral) from 150-2,500 A, with power losses less than 0.02%. Units offer dielectric strength above 3,000 Vdc and insertion loss above 40 dB in entire range, reaching 80 dB between 200 kHz and 1 MHz. With UL94 V2 flammability rating, filters are suited for renewable energy equipment, UPS systems, and power inverters.

Gigahertz-Optik Inc.    Newburyport, MA 01950 4009
Nov 25, 2011 Combining microprocessor and electronics in rack-mountable module, Model X1-RM provides linear current to voltage-to-current amplifier with 7 manually or automatically selected gain ranges. Maximum error within dynamic range is 0.2%. Four signal inputs operate in multiplex mode with 1 amplifier, while 4 additional analog voltage input channels enable meter to control additional detectors. Powered by 6-20 Vdc, Model X1-RM offers remote control operation via USB, RS485, or RS232 interface.

Delorme Publishing Company, Inc.    Yarmouth, ME 04096
Nov 23, 2011 Intended for those who work, travel, or engage in outdoor activities in off-the-grid environments, inReach(TM) can be used as standalone messenger or paired with Android phone or PN-60w handheld GPS to enable 2-way personal and SOS messaging. Remote communication features include send-and-receive text messaging, interactive SOS, message delivery confirmation, and global coverage. Featuring Iridium® 9602 short-burst data transceiver, unit connects to Iridium satellites as well as GPS.

Qualcomm, Inc.    San Diego, CA 92121
Nov 23, 2011 Gobi(TM) 4000 allows customers to offer LTE/HSPA+ and LTE/EV-DO designs to meet embedded 3G/4G connectivity demands in mobile devices. Based on MDM9600(TM) and MDM9200(TM) multimode 3G/4G wireless modems and common software for connection management development, products are compatible with many connectivity standards. Software for MDM(TM) chipsets enables common software interface to help connect, locate, and manage 3G/4G devices despite wireless interface and OS.

Broadcom Corp.    San Jose, CA 95110
Nov 21, 2011 With embedded processor, API, and complete software development environment, self-contained Wi-Fi subsystem lets manufacturers incorporate wireless connectivity into products that previously did not have networking capability. Self-hosted WiFi and networking software stack eliminates impact on host processor to manage connectivity in resource-constrained devices. Wireless Internet Connectivity for Embedded Devices (WICED) platform also integrates BCM4319 WLAN MAC/baseband/radio.