Maxim Integrated Products
Sunnyvale, CA 94086
May 14, 2008 Supplied in 5 x 5 mm TQFN package, MAX2117 zero-IF (ZIF) tuner receives QPSK signals in 470-1,000 MHz range and downconverts them to baseband for demodulation. Unit is specifically designed for China's UHF-band multichannel multipoint distribution service (MMDS) systems and compatible with DVB-S demodulators. Defining characteristics include 8 dB noise figure and better than 25 dB adjacent-channel protection ratio. Operating from single, 3.3 V ±5% supply, solution consumes 330 mW.

Maxim Integrated Products
Sunnyvale, CA 94086
May 14, 2008 MAX9598 is switch matrix for routing of audio and video signals between MPEG decompression chip and 2 external SCART connectors. It integrates DirectDrive(TM) technology to prevent click-and-pop noise. Contained in 6 x 6 mm TQFN package, unit operates from 0 to +70°C and includes audio and video channels featuring input-source-selection multiplexers, input buffers, and output buffers. It consumes 70 mW of quiescent power and is controlled through I²C-compatible interface.

Maxim Integrated Products
Sunnyvale, CA 94086
May 14, 2008 MAX2839 zero-IF MIMO RF transceiver utilizes dual-receiver technology to deliver noise figure at 2.3 dB, -81 dBm sensitivity for 64-QAM signal at 5 MHz channel bandwidth, and 95 dB gain control range that is digitally controlled in 1 dB steps. Also, it delivers 0 dBm linear output with 64-QAM signal, greater than -45 dBc of sideband suppression, and more than -36 dB EVM. Operating from 2.7-3.6 V supply, it is available in 8 x 8 mm, leadless, 56-pin TQFN package.

Maxim Integrated Products
Sunnyvale, CA 94086
May 14, 2008 Featuring 3 independent voltage inputs, Model MAX4929E is capable of switching between 2 digital video signals going into single monitor or between multiple HDMI/DVI connectors while maintaining signal integrity. Two enable inputs allow switch to operate in normal mode or high-impedance state. Providing all switching, logic-level matching, and ESD protection required to complete 2:1 HDMI/DVI switch, MAX4929E is suited for HDTV receivers and monitors.

Tripp Lite
Chicago, IL 60609
May 13, 2008 NetCommander(TM) 16-port B072-016-1-IP KVM Switch enables users to access and manage server components remotely via Internet. Unit features 1U rackmount design with RJ45 connection ports that utilize Cat5 patch cables. Users can switch between CPUs with hot key commands, with on-screen display menu, or with remote console toolbar. In addition, switch provides password protection and advanced encryption technologies, including 128-bit SSL and HTTPS.

Integral Systems, Inc.
Lanham, MD 20706
May 13, 2008 Featuring full spacecraft commanding at 64 kbps, EPOCH IPS complies with European Space Agency's Packet-Utilization Standard for satellite control systems and electrical ground support equipment. It includes command verification for immediate and time-tagged commands, merging ECSS PUS report and EPOCH telemetry verification. In addition to satellite housekeeping and diagnostic telemetry format decommutation, system provides database-driven spacecraft event and alarm formatting.

Electro Standards Laboratories
Cranston, RI 02921 3403
May 12, 2008 Supporting fiber optic wavelength of 850 nm and gigabyte data rate, QuickSwitch Model 6273 ST Duplex, MultiMode, A/B switch allows one workstation or device to access either of two separate fiber optic networks. It uses mirror technology and can be accessed remotely by using DB9 RS232 serial port. Users can either remotely monitor status and control switch functions or use front panel pushbutton control.

Agilent Technologies, Inc.
Palo Alto, CA 94303
May 12, 2008 Facilitating design and validation testing, 86116C Option 025 provides reference receiver capabilities for 100-G Ethernet and 16X Fibre Channel signals. Module works with 1,310 nm and 1,550 nm single-mode transmitters, and characteristically has 45 GHz optical and 93 GHz electrical unfiltered bandwidth. Used in 86100C DCA-J oscilloscope mainframe, unit helps engineers investigate, design, and verify performance of transceivers that terminate optical fibers for LANs and SANs.

RF Digital Corp.
Montrose, CA 91020
May 12, 2008 Measuring only 1 in. square, Model RFD21715 Wi-Fi Module enables OEMs to engineer products with Wi-Fi capabilities and extended battery life. It integrates application subsystem that is supported by SDK, which integrates robust RTOS, network stack, Wi-Fi, and I/O services. Other features include AES encryption, IPv4 TCP/IP, UDP, DHCP, and SNMP, which provides for remote device configuration and management.

Edmund Optics
Barrington, NJ 08007
May 12, 2008 With cut-off slope of less than 1%, TECHSPEC® High Performance Shortpass Filters feature rejection band optical density of 4.0 combined with greater than 91% transmission in pass band. Made from UV grade fused silica, they are available in 12.5 and 25 mm sizes with cutoff wavelengths of 400, 450, 500, 550, 600, 650, and 700 nm. Filters measure 3.0 mm thick with clear aperture of greater than 80%, surface quality of 40-20, and wavefront distortion of 1/4l rms at 633 nm.

Circuit Design, Inc.
NAGANO 399-8303  Japan
May 09, 2008 Intended for Europe and Asia, STD-302N-R Transceivers are available in 434, 869, 458, 447, 429, and 419 MHz versions. Pin assignment is same in all versions so that by changing frequency program to suit various frequencies, user can provide products that meet radio regulations of each country. Achieving accelerated TX/RX switching speed, modules are finding use in industrial telecontrol as remote radio control incorporating answer-back function.

Active Control Technology Inc.
Burlington L7L 6A1  Canada
May 09, 2008 Equipped with Starfish(TM) feature, ActiveMine(TM) makes it possible for miners who become isolated due to accident, explosion, or other event to stay linked, even when they are distant from one another and cut off from outside world. Starfish operates on top of system's 100% wireless Wi-Fi MESH network, which is formed by series of nodes placed at strategic locations in mine. Multiple wireless paths will maintain communication links in event any node fails or is damaged.

TelSpan, Inc.
Indianapolis, IN 46204-3409
May 09, 2008 Adding up to 6 simultaneous, live webcams to web conference, Flash®-based TelSpanRayo enables each moderator to present their own content online or share applications, regardless of operating system. It also permits streaming audio and video files during live web conference. From intuitive web interface, participants worldwide can share desktops, webcams, photos, presentation slides, whiteboard sketches, and streaming video and audio files, without downloading software.

JDSU
San Jose, CA 95131
May 09, 2008 Model OCC-55 Smart Optical Channel Checker is designed for CWDM system installation, upgrades, and troubleshooting. It operates in 1,260-1,620 nm range, and can analyze all 18 CWDM wavelengths in terms of individual power level and display measurement results in bar-graph or tabular mode. CWDM analyzer deploys USB interface that, when used in combination with OFS-355 software, provides customized reports which can be downloaded from OCC-55 to any PC.

Omron Scientific Technologies Inc.
Fremont, CA 94555
May 08, 2008 DST1-XD0808SL-1 supports 6 safety inputs and 8 safety outputs and is capable of storing simple logic, which allows local outputs to be directly controlled by local inputs, giving users maximum response time of 18.7 msec. Safety I/O Terminals can operate as DeviceNet Slave, allowing safety input and status information to be monitored via DeviceNet Master. Each safety output can be controlled through network signal, or used as auxiliary output function.

Pentek Inc.
Upper Saddle River, NJ 07458
May 08, 2008 Attached to PMC carrier board, Model 7151 provides four 200 MHz 16-bit A/D converters that feed FPGA IP core, which delivers 256 channels of digital down conversion. Unit enables independent frequency tuning for each down converter channel, and can down-convert any signal within any of 4 digitized 100 MHz input bands. Arranged in 4 banks of 64 DDC channels, each bank can be configured for unique output signal bandwidth to accommodate mixed signal applications or multiple modulation schemes.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
May 07, 2008 Model ML2726 is low power, low-IF, frequency shift key RF transceiver that incorporates sigma-delta fractional-N synthesizer, VCO, up/down-conversion mixers, data slicer, and transceiver configuration registers. Offering 2 Mbps data transmission rate, unit delivers -81 dBm sensitivity at 0.1% bit error rate. It also features analog/digital data output, digital transmit data input, and received signal strength indication output. Integrated power regulation enables 2.7-4.5 V operation.

Extech Instruments Corp.
Waltham, MA 02451 1020
May 06, 2008 Including Models EX612, EX613, EX622, and EX623, EX600 Series True RMS Clamp Meters feature IR thermometer for locating hot spots and NCV and dual thermocouple inputs for T1, T2, and T1-T2 differential temperature measurement. With 1.4 in. jaw opening for conductors up to 500 MCM, units provide 40,000 count clamp meter functions for dc voltage, resistance, capacitance and frequency, and can measure motor capacitors to 40,000 µF. Models EX613 and EX623 also provide dc current function.

Nortel Networks Corp.
Brampton, ON L6T4B8
May 05, 2008 Through plug-and-play components, 40G/100G Adaptive Optical Engine equips carriers to keep pace with increasing demand from bandwidth-intensive applications. Dual Polarization Quadrature Phase Shift Keying with coherent detection allows 40G operation over existing 10G networks, and digital signal processing removes all compensation requirements from network. Solution also provides foundation to increase capacity tenfold when evolving to 100G.

Nortel Networks Corp.
Brampton, ON L6T4B8
May 05, 2008 Suited for SMBs with 30-1,000 employees, Software Communication System 500 (SCS500) is based on open source technology and works across different networks and devices. SIP-centric solution, accessed via Web portal GUI, integrates communications infrastructure and business processes such as voice, video, IM, and conferencing with key office applications to improve employee collaboration. It also offers presence to locate individuals and gauge their availability.