|
|
|
Cleaning Products & Equipment ->
Cleaning Tools ->
Dryers
Dryers
(Showing headlines 1 - 20) more ....
|
 Drying Systems use thermal oxidation to stop contamination.Rehm Thermal Systems
Blauberen Germany
Oct 27, 2009
RDS Drying Systems offer thermal oxidation process designed to eliminate challenge of residue contamination stemming from photovoltaic metallization in order to minimize maintenance and provide cleaner process chamber. Process involves heating gas to temperature greater than 500°C, while arrangement of heater and granulate pack lend to space and energy consumption reduction. In order to oxidize hydrocarbons, catalyzers are installed downstream from heating chamber.
|
 Drying Systems are intended for solar cell metallization.Rehm Thermal Systems
Blauberen Germany
Jul 16, 2009
Along with belt speeds to 6 m/min and max throughput of up to 5,700 wph, RDS 2100 and RDS 3000 offer process and thermal control features that enable PV manufacturers to promote efficiency and yield. Drying process combines either 5 or 7 IR zones and one central convection zone, delivering temperature profiling adjustable for precision and flexibility. Horizontal throughput systems ensure safe transport through oven via mesh belt or pin chain for up to 3 lanes.
|
 System dries samples and allows color viewing.Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Mar 10, 2009
Designed to help accurately match colors, Dry-N-View includes both Viewing Station and Drying System. Viewing Station comes with Daytime, Incandescent, and Fluorescent light sources for viewing color samples in various settings. Able to dry multiple samples with push of button, low-heat drying system will not distort samples due to intense heat, ensuring accurate color sample results. System draws only 3 A and automatically shuts off when sample is dry.
|
 Air Wipe provides 360° static discharge for moving surfaces.EXAIR Corporation
Cincinnati, OH 45249-1621
Jan 12, 2009
Using small amount of compressed air to entrain room air, Super Ion Air Wipe provides uniform 360° ionized airstream that clamps around continuously moving part to eliminate static electricity and contaminants. Featuring all aluminum construction, unit comes in 2 in. diameter with air consumption of 30 scfm and 4 in. version with air consumption of 50 scfm when powered at 80 psig. Wipe is suited for removing dust, particulates, and shocks on pipe, cable, extruded shapes, hose, and wire.
|
 Adjustable Hand Dryer offers hands-free/pushbutton operation.Bradley Corp.
Menomonee Falls, WI 53051
Sep 18, 2008
Suitable for any application, Aerix(TM) with multiple speeds gives facility managers option of turning up for fast drying in settings such as sports centers, schools, or themeparks, or turning down for quiet operations such as museums or libraries. It can dry hands in as little as 10 sec, depending on model, and conforms to ADA anti-protrusion requirements. Units are available in several cover options including cast iron, white enamel-coated steel, or SS with satin finish.
|
Hand Dryers offer various cover finishes.Excel Dryer, Inc.
East Longmeadow, MA 01028
Nov 07, 2007
Designed to completely dry hands in 10-15 seconds, XLERATOR® Hand Dryers are available with appliance-grade white thermoset bulk molded compound finish, which is resistant to vandalism, and brushed stainless steel finish for distinct, architectural look. Additional finishes include traditional white, fingerprint-resistant graphite, chrome-plated, and custom colors. Dryers achieve GreenSpec® approval and help facilities qualify for LEED® credits.
|
Air Dryer resists corrosion and high temperatures.EXAIR Corporation
Cincinnati, OH 45249-1621
Oct 08, 2007
Featuring split design that can be clamped around continuously moving material such as pipe, hose, cable, wire, and extruded shapes, stainless steel Super Air Wipe(TM) produces 360° airstream that can blow off, dry, clean, or cool material passing through center. Air velocity can be varied with instant on/off control, and additional shims can be installed if more blowoff force is required. Areas of use include food, chemical, and pharmaceutical applications.
|
 Packaged Drying System replaces compressed air blow-offs.Paxton Products, An ITW Co.
Cincinnati, OH 45242
Jun 08, 2007
Designed to remove debris and moisture, PowerDry(TM) System incorporates centrifugal blower that develops air flow and pressure from 3 hp motor. FDA compliant hose carries airflow to 6-nozzle air tube that delivers successive hits of high impact air. As alternative to compressed air, PowerDry eliminates potential contamination from oils and scale in compressed air supply. It features washdown design suited for food, beverage, and packaging operations.
|
Membrane Air Dryers offer quiet operation.Parker Hannifin Corp., Filtration & Separation Div. Balston Products
Tewksbury, MA 01876
May 01, 2007
RequBalston® IT Series Membrane Air Dryers provide pure, dry compressed air at dewpoint of 35°F and flow rates from 1 to 50 scfm. They remove all compressed air contaminants down to 0.01 micron in size. Without any moving parts, units come with prefilters, auto drains, and membrane modules, and require no electricity.
|
 Air Dryer helps eliminate air line contamination.Van Air Systems, Inc.
Lake City, PA 16423 2095
Jun 22, 2006
With minimal system pressure drop, Freedom Dryer Blast Pak Air-Drying System delivers moisture control in compressed air lines. It eliminates flash rusting, air-line contamination, freeze-ups, and clogged blast pots. Because it needs no electricity, product is completely portable and safe for use in hazardous areas. No maintenance is required, other than daily draining and occasional addition of desiccant.
|
High-Speed Air Hand Dryer works in 5-6 seconds.PACARC, LLC
Seattle, WA 98103
Apr 06, 2006
Jet Towel removes water from front and back of freshly washed hands using touch-free operation. U-shaped drying port at top of unit features front and rear horizontal air jets that force water from front and back of both hands simultaneously. Sanitary design, with antibacterial-treated surfaces, eliminates water spray on floor and prevents floor debris from circulating throughout room. With 65dB noise rating, 220 V, 650 W, 4 A unit measures 27 x 11.8 x 8.7 in.
|
 Heated Gas Dryers handle gas flows up to 1.5 Lpm.Perma Pure Inc.
Toms River, NJ 08754
Oct 21, 2004 Series MDâ„¢ Dryers combine Nafion® technology with heating element to dry hot, wet, sample gases prior to analysis. Nafion technology selectively removes only water from samples gases, leaving rest of gas sample unaffected. Dryers remove water directly from vapor phase, preventing loss of water-soluble gases through dissolution in condensate. Available for use with 110 or 220 Vac, or 12 Vdc, units can dry gases with as much as 30% water by volume. |
 Air Blower keeps machine window clear of debris.EXAIR Corporation
Cincinnati, OH 45249-1621
Aug 06, 2004
With no moving parts, Air Disk Window Blowoff keeps window of machines clear of coolant, chips, and debris, ensuring process and part visibility at all times. Compact disk delivers 360° airstream that blows out across entire window surface. Using proprietary airflow technology, disk ejects compressed air through thin-slotted ring nozzle. Peel and stick adhesive permanently bonds aluminum Air Disk to glass or polycarbonate surface.
|
 Membrane Air Dryer provides dry air at dewpoint of 35°F.Parker Hannifin Corp., Filtration & Separation Div. Balston Products
Tewksbury, MA 01876
Feb 27, 2004 SMART Dryerâ„¢ 5000 Series Air Dryers provide pure, compressed air at flow rates to 200 scfm. Drying system produces dewpoint of 35°F and removes all other compressed air contaminants down to 0.01 micron. System monitors air consumption and automatically adjusts regenerative sweep flow as required, without need for electricity. It comes with prefilters, auto drains, and membrane modules assembled in cabinet with top-mounted inlet and outlet ports. |
 Electric Hand Dryer saves energy with automatic operation.Sloan Valve Co.
Franklin Park, IL 60131
Jul 23, 2003 One-piece, die-cast XLerator® Hand Dryer provides hands-free operation with average drying time of 15 sec. Available in voltages of 110/120, 220/240, 208, and 277 V and 2 rust-inhibiting finishes, unit includes automatic reset thermostat, infrared sensor operation, 35-sec lockout feature, and low 1,500 W requirement. It includes rib-reinforced wall plate, tamper-proof bolts, and numerous mounting holes. |
 Air Wipe offers quiet operation.Extrusion Solutions, LLC
Las Vegas, NV 89120
Jun 17, 2003 VacuWipeâ„¢ features vacuum action from compressed air that removes water droplets without whipping action. Vacuum holds product securely to rollers, preventing drag during operation. Moisture and impurities in air compressor lines are routed to drain, preventing contamination of extruded product. |
Air Distribution System eliminates dead spaces.Witte Co., Inc., The
Washington, NJ 07882
Jan 03, 2003 Product offers CNC-punched air distributors placed below dryer deck to generate consistent, vertical air flow at constant velocity. Directing uniform air flow perpendicular to dryer deck throughout entire length of fluid bed, dual air distributors prevent formation of dead spaces that occur when air flow is angled or inconsistent. Unit's air distributors also eliminate conditions that cause product charring and degradation. |
 Spray Dryer controls and measures relative humidity.Scientific Instrument & Technology Corp.
Piscataway, NJ 08854
Jun 03, 2002 Model FT80 Spray Dryer has Tall Form chamber straight side to diameter ratio of 3:1 and conical discharge section. Features include 2-fluid nozzle atomization system, nozzle configurations for counter- and co-counter atomizing, and individual inlet and exhaust fans with variable speed control. IP65 control console provides full instrumentation, data logging for key operational parameters, and flexible controls. It is available as Spray Chiller (FT81). |
 Filter Dryer produces dry cakes.Pannevis, Inc.
Rockaway, NJ 07866
May 08, 2002 RT(R) filter can be used with either hot-gas drying or infrared drying. Filter is available in open, fume tight, gas tight, and pressure tight configurations, and with full sanitary configuration to meet cGMP requirements. For hot-gas drying, segmented tray design makes it easy to use specific tray sections as hot gas drying zones. Hot gas can be air, nitrogen, or steam. Infrared drying can be used with less permeable cakes that tolerate higher drying temperatures. |
 Refrigerated Dryers keep compressed air dry.Van Air Systems, Inc.
Lake City, PA 16423 2095
Apr 10, 2002 RD Series refrigerated compressed air dryers remove moisture from indoor air lines while providing 35 to 38 deg F dew point, low pressure drops, and no heat exchanger freeze-ups at low loads. It has non-cycling refrigerant compressor, CFC-free R-22 refrigerant, and capacity control valve to maintain steady dew point when flows fluctuate. Models are available to handle flows from 10 to 3,000 scfm at 100 psig. Models under 40 scfm include built-in mechanical drain. |
(Showing headlines 1 - 20) more ....
|
|
ThomasNet News Advertisers
|
 |
|