Able to be utilized for floor scrubbers, machinery, tools, and general maintenance cleaning applications, QUAKER FORMULA® PURE BLUE™ contains surfactants to cut through oil, grease, and dirt that accumulate on floors, walls, and equipment. Non-hazardous, water-based, all-purpose cleaner is formulated without phosphates, silicates, phenols, or glycol ether solvents; has no harsh chemicals; and exhibits mild soapy scent and nearly neutral pH.
Featuring 2-stage spray nozzle, Desolv™ Aerosol safely powers off dirt, biological contaminants, debris, and films within minutes using concentrated, atomized, and odorless spray that penetrates deeply into evaporator coils and blowers. Self-rinsing formula will dislodge contaminants that potentially reduce coil heat transfer and clog evaporator condensate drain pan orifices. Product contains no acid or aggressive chemicals and does not separate regardless of storage time. Read More
As pre-primer, SURFOX PRE-WELD removes contaminants from metallic surfaces prior to welding. VOC- and solvent-free SURFOX RENEW restores stainless steel to its original condition by removing rust and oxidation without attacking parent material. VOC-free and non-hazardous SURFOX SHINE removes dust, dirt, fingerprints, oils, and handling marks from indoor stainless steel. All above products are non-toxic and promote clean, healthy, and safe industrial work environment. Read More
Providing pH-balanced cleaning formula fortified with skin conditioners to help sooth rough hands, Industrial Hand Cleaner contains fine-grade pumice which helps clean dirt, grease, resin, ink, oil, paint, and glue from hands without drying out skin. Product is biodegradable, VOC compliant, and contains no harsh solvents. Available in Cherry or Grape scented, cleaner can be used with or without water. Read More
Gum Reaper turns gum on carpets and hard floor surfaces into powder that can be brushed away without damaging underlying surface. Using safe, vegetable-derived cleaning solution, product can remove up to 700 gum spots in one hour and breaks down gum modules in <5 sec. Little or no residue is left behind. Powered by rechargeable batteries, product design eliminates need for cables or cords to foster flexible use. Read More
By dissolving grease, oil, and sludge, Lectra Force™ Electrical Cleaner promotes efficient operation of electric motors as well as electrical parts and equipment. Non-corrosive, non-conductive, and non-staining product utilizes COzol® technology, which combines industrial strength degreaser with low VOCs, and does not contain any Class I or II ozone depleting chemicals, TCE, Perc, or nPB. Product evaporates and does not leave any residue, minimizing downtime associated with CIP methods. Read More
Formulated for use on aluminum and non-ferrous alloys, water-based CB 100 ALU leverages raw material derived from plant extracts (Nature Boost). By-products produced during cleaning float to surface, allowing workers to skim contaminants. VOC-free, non-flammable, and softly scented, this non-corrosive and biodegradable product can be used to clean ink, paint, rubber marks, tar, wax, resins, carbon, soot, pastes, adhesives, and other hard-to-clean contaminants. Read More
Available in 20 oz aerosol package (Part No. 03250) and 1 gal bulk container (Part No. 03251), Industrial Adhesive Remover is formulated for accelerated removal of adhesive labels from diverse substrates. This general-purpose, industrial-strength adhesive remover cleans oil, grease, tar, and grime to help keep equipment running smoothly. Able to remove sticky buildup, VOC-compliant product is also non-corrosive and safe for use on most equipment. Read More
REACH-registered and 99.99% pure pre-treatment, metal-cleaning, and degreasing products include aerospace-approved TRIKLONE™ N (Trichloroethylene TCE) and PERKLONE™ MD (Perchloroethylene PCE). While TRIKLONE is minimally stabilized for specialized applications, highly stabilized TRIKLONE N suits metal degreasing applications. PERKLONE MD serves metal degreasing applications as well as dry-cleaning applications, while catalyst/isomerization grade PERKLONE EXT is refinery approved by UOP. Read More
Supplied in 16 oz aerosol packaging with 360 valve and carbon dioxide used as propellant, Knock’er Loose® dissolves rust, gum, grease, and corrosion to allow accelerated removal of nuts, bolt, pins, screws, bushings, hinges, and lugs. Reddish, non-flammable liquid, which carries pine odor, has petroleum base and 147°F flashpoint. Other properties include 0.86 specific gravity, 35,200 V dielectric strength, and 23.6% VOC content (203 g/L, 1.7 lb/gal).
Used for degreasing, machine maintenance, and deep cleaning, 220 V Blitzer Combi heats up in 7 min and achieves pressures up to 120 psi as well as tip temperatures of 212°F. Compact and maneuverable Envirosteam UVC uses dry steam vapor enhanced with uvc light to sanitize captured soils for critical cleaning procedures. Internal boiler produces dry steam up to 145 psi and temperatures to 365°F. Both cleaners combine dry steam, wet/dry vacuum, and sanitizing agent/germicidal injection. Read More
Intended for automotive retail applications, Permatex® Fast Orange® comes in 15 oz rocker cap bottle that allows one hand use and helps keep bottle free of grease. Product features patented MicroGel™ Technology, a Polymer Emulsion synthetic solvent that eliminates need for citrus or petroleum based solvents. Offered in smooth and pumice formulas with skin conditioners to help keep hands soft, cleaner is biodegradable, non-toxic, and petroleum-solvent free. Read More
Along with 9 flow arrangements that accommodate sizing/grading variations, Clipper Ceres 686-2-4 Cleaner has integrated bottom fan, split frame design, and precision cleaning capacity of 600–800 BPH (soybeans and wheat). Control panel addresses seedman automation requirements, accessible drive guards with inspection windows allow viewing of all v-belt drives, and safe seed edge molding reduces seed coat damage. Adjustable splitter flow balances and maximizes screen deck capacity. Read More
Encoded Digital Guidance (EDG)-trac™ Knife Advance System for Pre-Coat Rotary Vacuum Drum Filters (RVDFs) removes solids content to as little as 1.4 thousandths of inch per revolution at drum speed as low as 0.2 rpm. This extends pre-coat life by not cutting away clean pre-coat while maintaining acceptable solids separation and improving liquid throughput. Features include single-motor VFD, fully automated PLC, and automatic high-speed retract mode. Read More
Designed for cleaning ductless mini-split air conditioner evaporator coils and blower fan blades, Desolv™ Cleaning Kit features collapsible 2 in. wide plastic framework with drawstrings for tightening around any evaporator encasement up to 45 in. wide. Two heavy-duty 45 x 2 in. orange plastic collection bags hook onto framework's hang knobs for funneling solvent into collection pail. Additional features include 1 gal of non-toxic Desolv™ cleaning agent and one 5-gal collection/carrying pail. Read More
Designed for porous roll surfaces that require specialized surface cleaning and conditioning, EzKleen™ Roll Polisher removes build-up without surface regrinds or special release coatings. Unit fits into most roll cleaners and incorporates application-specific cleaning pads. Pivot point allows self-adjustment for all blade angles and roll diameter situations. Read More
Intended for exterior moldings and trim, Apex® 1545-D40 ST compounds enable direct extrusion of smooth, textured surfaces that remain blemish-free after prolonged outdoor exposure. Typical properties include respective Shore C and D hardness values in 60–70 and 34–44 ranges, specific gravity from 1.37–1.43, tensile strength from 8–18 MPa, and elongation at break from 150%–250%. Products can be coextruded, bond to metal, or offered in custom colors and gloss. Read More
Dispensed by being dissolved in water at time of use, Sentinel combats such bacteria as staphylococcus aureus, E-coli, and listeria monocytogenes. Product minimizes potential for employee contact due to spills or splashing of concentrated liquid. When used at 1 oz of solid sanitizer per 16 gal of warm water, one 3 lb capsule of Sentinel makes up to 1,000 gal of sanitizing solution. Sanitizer is also effective in hard water conditions up to 750 ppm as CaCO3. Read More
Suitable for diluting or cleaning utensils, Necosolv O-wb is non-HAP with no Ozone Depleting Potential, low Global Warming Potential, and less than 50% VOC. Fast-evaporating product has no flash point, boiling point of 60°C, and Kauri-Butanol value of 56. Also non-HAP, Necosolv VB-wb features low ODP and GWP and about 75% VOC. Boiling point is 66°C and K-B value is 69. Binders in these solvents allow users to create suspension that can be used to apply adherent layers to most any surface. Read More
Accelerating effective use and healthy operation, KaiGrouter attaches to existing Kaivac No-Touch Cleaning® system wands to blast dirt from grout areas. Treated areas are left clean and contaminant free without requiring any scrubbing with harsh chemicals. Combination of rotary nozzle and extraction capabilities optimizes grout cleaning capability.