NLB Corporation    Wixom, MI 48393 2824
Mar 27, 2012 Using simple conversion kit, 125 Series water jet pump units can be converted to any of eight operating pressures from 6,000 to 40,000 psi. Series features flow ranges of 4.4 to 32.5 gpm and choice of 125 or 145 hp diesel or electric engine. Unit's ultra-high pressures offer flexibility to do diverse jobs with a single water jet pump unit. Applications include contractor and industrial uses such as, surface preparation, pipe/tube cleaning, concrete hydrodemolition, and more.

Guardair Corporation    Chicopee, MA 01020
Oct 20, 2011 Available in 24, 36, 48, 60, and 72 in. lengths, Force 5® gun delivers power necessary for heavy-duty industrial cleaning and maintenance applications. Field tests revealed output thrust capability of 302 scfm; there was less than 30 psi at tip when dead ended. Fully portable, U.S. manufactured product features all-metal construction, ¾ in. FNPT inlet, ergonomic handle, and adjustable auxiliary handle. Extended trigger allows full hand actuation.

Daimer Industries Inc    Woburn, MA 01801
Sep 13, 2011 Wheel-mounted for portability, Vapor-Flo® 7940 Pressure Washers are powered by 4.0 hp motor and are capable of high-pressure cleaning to 2,175 psi with cold water or hot water up to 79.4°C. Units are housed in powder-coated steel and designed to work with 50 Hz, 3-phase, 440 V electrical environments. Exhaust-canceling design makes washers suited for applications in food and beverage operations, hospitality, casinos, and nursing homes.

Nu-Star, Inc.    Shakopee, MN 55379
Jun 30, 2011 Operating up to 3 ft away from target surface, Dual Skydrowasher(TM) cleans high-rise building windows and exterior using high-pressure water. Automated system features 2 high-pressure spray bars and offers 9 ft wide cleaning path. Weighing 400 lb with hoses, system uses turbo nozzles mounted within high-impact plastic shell and does not require electricity. Water pressure-based operation enables cleaning rates to 18,900 ft²/hr or 315 ft²/min.

Builders Automation Machinery    Largo, FL 33773
Jun 14, 2011 Remediator pressure cleans off mold, dirt, stain, and contamination from lumber and then moves it into chamber, where mold inhibitor is applied. This mold repelling machine allows lumber that has been sitting at lumber yards and home improvement centers for longer periods of time than recommended to be treated and re-entered into inventory as good lumber. Also, excess lumber from building sites can be restored to like new condition.

Daimer Industries Inc    Woburn, MA 01801
May 05, 2011 Collectively comprising 8 machines with Long Hose Technology (LHT), Vapor-Flo® 8200 and 8300 series let users clean with hose-connected trigger wands up to 299 ft from pump/base unit and electrical source. Mobile and stationary versions of these 230 V, top-loading pressure washers support user-accessible refill tank and are rated for pressures to 1,700 psi. Respectively, 8200 and 8300 series support water-flows to 0.4 and 0.6 gpm and clean at temperatures to 205°F and 175°F.

Daimer Industries Inc    Woburn, MA 01801
Apr 25, 2011 Powered and heated using only electricity for quiet, no-fume operation, 60 Hz Vapor-Flo® power washers are available with Long Hose Technology that lets operators clean up to 300 ft away from unit. Styles range from stationary to mobile and come in no-stain steel cases as well as power-coated housings. Respectively, pressure and water flow levels vary respectively from .4-2.7 gpm and 175-1,450 psi. Each model supports cleaning with or without heat, and temperatures ratings reach 205°F.

Daimer Industries Inc    Woburn, MA 01801
Apr 06, 2011 Vapor-Flo® 7600 series electric power washer systems include mobile models 7600, 7625, and 7675 as well as static model 7650. Offering cleaning temperatures up to 79.4°C, systems are rated to pressure levels of 130 bar and water flows of 3.8 Lpm. Driven by commercial-duty, 2.0 hp motor systems, machines offer no-exhaust heating via all-electric coil-enhanced heater. They use electricity for heating and pressure and reach maximum temperature in less than 25 sec.

Daimer Industries Inc    Woburn, MA 01801
Mar 31, 2011 Employing 5.0 hp electric motor and pump system, butane burning Super Max(TM) 12200B series removes high volumes of gum wads from stone surfaces such as sidewalks, driveways, pavers, and floors. Each wet steam power cleaner ships mounted on wheels but can also be trailer mounted. Able to generate nearly 2,000 psi, this 220-240 V series requires only one power cord and provides water flows up to 4.0 gpm. Trio of cleaning modes include 330°F wet steam.

Daimer Industries Inc    Woburn, MA 01801
Mar 25, 2011 Featuring 440 V, 50 Hz design, all-electric Vapor-Flo® 7500 Series produces minimal noise and no exhaust. Units provide pressure levels up to 130 bar with flow rate of 2.3 lpm and cleaning temperatures up to 96°C. Two-Temperature modes allow units to clean variety of surfaces with either cold or hot water. Housed in industrial-grade steel case with chemical-resistant coating, machines come with foam lance injection system for dispersing cleaning solutions.

Daimer Industries Inc    Woburn, MA 01801
Mar 18, 2011 Featuring 440 V, 50 Hz configuration, Vapor-Flo® 7500 series operates with minimal noise and non-existent fumes. Steel, coil-based heating unit can deliver max temperatures in 15 sec. Portable models 7500, 7525, and 7575, as well as stationary unit 7550, offer pressure level ratings of 130 bar and flow rates of 2.3 Lpm. While entry level 7525 is housed in rust-resistant steel case, other models come in powder-coated housing. All are driven by 50 Hz, 2.0 hp, industrial-duty motor.

NLB Corporation    Wixom, MI 48393 2824
Mar 17, 2011 Producing water pressures up to 40,000 psi from rotating nozzles, SRT-10-W Crawler removes coatings and scale. It is operated via wireless control by personnel on ground from as far as 1,500 ft away. Moving up, down, and across tall structures, product strips surfaces down to bare metal at reported removal rates of up to 2,000 ft²/day without exposing personnel to risk of falling. It does not use any abrasive and has vacuum recovery to contain water and debris.

Daimer Industries Inc    Woburn, MA 01801
Mar 09, 2011 With flow rates of 4.0 gpm, Super Max(TM) 12200 Series can produce as much as 2,000 psi with 5.0 hp NEMA electric motor. Power washers support 3 temperature cleaning modes, including 330°F wet steam option designed for chewing gum. Heated with propane, 220-240 V machines include direct spark ignition and ship with empty 50 lb propane tank. All models support use of cleaning additives via high-pressure chemical infusion system. Units are on wheels and can be trailer mounted.

Daimer Industries Inc    Woburn, MA 01801
Mar 08, 2011 Supplied with nozzles that produce different spray patterns, Super Max(TM) 6000B can clean with cold or heated water and wet steam. Continuous-duty machines, housed in heavy-duty, powder-coated steel, provide powered cleaning with temperatures as high as 330ºF. They can turn cold water into hot in under 1 min and support chemical cleaning with siphon-style infusion system. For pressure generation to 750 psi, machines employ .75 hp motor and direct drive pump unit. Rated flows reach 1.4 gpm.

Daimer Industries Inc    Woburn, MA 01801
Mar 02, 2011 Measuring 2 ft x less than 3 ft, Super Max(TM) 7000B series uses butane to achieve temperatures effective for removing gum wads from stone, asphalt, and concrete. Unit relies on one power cord for included 1.5 hp motor, which operates using single-phase, 60 Hz, 110-120 v power. Able to generate pressures approaching 1,000 psi in standard use and rated for 2.5 GPM water flows, washers offer 3 cleaning modes, including high-temperature (up to 330°F) wet steam mode.

Daimer Industries Inc    Woburn, MA 01801
Mar 02, 2011 Powered and heated with electricity, 50 Hz Vapor-Flo® 7275 Series is suited for use in exhaust-sensitive environments. Units generate 1,450 psi and offer flow rates of 1.5 lpm, minimizing water waste. Direct drive machines are designed for continuous use and can clean with either cold or hot water, which reaches max temperature of 79.4°C. Equipped with front loading chamber, washers can be manually refilled when operators are working away from water source.

Daimer Industries Inc    Woburn, MA 01801
Feb 08, 2011 Employing direct drive pump and 50 Hz, 1.0 hp motor, Vapor-Flo® 7350 Series offers peak pressure level of 1,700 psi while maintaining flow rates down to 1.5 lpm. Heating units, based on steel coil-enhanced system, deliver heated temperatures to 96.1°C. Machines can also be used in unheated mode for cold-water cleaning. Manufactured with stainless steel housing that resists stains and rusting, non-movable units are suited for cleaning heavily used equipment and machinery.

Daimer Industries Inc    Woburn, MA 01801
Feb 07, 2011 Super Max(TM) 6235SCW operate on 220-240 V and offer 1.9 Lpm of flow, pressure level ratings of 67 bar, and wet steam temperatures capable of 149ºC. Mounted on wheels, machines are mobile and include electric motors that generate .75 hp. Included propane heating systems can convert cold water to hot in approximately ½ min and 5 nozzles are included for different spray patterns. Products clean auto and truck surfaces from residues such as brake dust, mud, grease, oil, and tree sap.

Daimer Industries Inc    Woburn, MA 01801
Feb 03, 2011 Supporting 110-120 V, single phase power, 50 Hz Series 7050 offers 9.5 lpm flow rates and can generate 67 bar pressure levels. Wet steam temperatures reaching 165°C allow systems to remove gunk from engines, along with other residues such as mud, sap, oil, grease, and brake dust. Equipped with 1.5 hp electric motor, machines feature propane-powered heat system that produces hot water in under 1 minute, and are wheel-mounted for portability.

Daimer Industries Inc    Woburn, MA 01801
Jan 27, 2011 Suited for repeat applications in fume-averse environments, Vapor-Flow® 7250 Series provides maximum temperature of nearly 80°C, as well as unheated cleaning with pressurized cold water. All models offer pressure level ratings that peak at 1,450 psi and flow rates of 1.5 lpm. Housed in stainless steel case designed to inhibit rust and prevent staining, machines utilize direct drive pumps and are driven by 1.0 hp, 220-240 V, 50 Hz motor.