Pro-Link, Inc    Canton, MA 02021
Sep 13, 2010 Suited for cleaning facility floor, MicroTwist mops use patent pending yarn design, which takes continuous microfiber filament and then uniquely wraps it in polyester thread. Units are normally used with conventional cut-end wet mops, and can also be used with all traditional hardware.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Sep 08, 2010 Compatible with all Milwaukee SAWZALL® and Hackzall® Recip Saws, Scraper Blades are available in 1½ and 3 in. sizes and are suitable for removing linoleum flooring, strong adhesives, paint, glue, thin-set, drywall mud, and rust. Blades feature induction hardened edges, corrosion-resistant coating, and chamfered corners. Grout Removal Tool, with curved cutting edge, coarse carbide grit, and corrosion-resistant coating, is suitable for removing grout from 1/8-¾ in. wide.

Hardy Diagnostics    Sandy, UT 84070
Sep 08, 2010 Combining moisturizing effect of aloe vera, healing properties of vitamin E, and scent of lavender oil, AloeSafe(TM) is free from harsh chemicals found in other hand sanitizers, such as glycerin, artificial colors, propylene glycol, and parabens. Product does not cause drying, leaving hands soft while showing 99.9% kill rate of potentially infectious bacteria.

Flexaust Co., Inc., The    Warsaw, IN 46581
Sep 07, 2010 Flexaust Dayflex® Lightweight Stretch Hose features PVC construction reinforced with vinyl coated spring steel wire helix, and is available in flat top style providing greater than 5:1 high stretch ratio or full block style with 4:1 ratio. Flexible and durable, it is offered in ¾-2 in. ID sizes and standard lengths ranging from 2-36 ft. Product resists most chemicals, detergents, and abrasion and can be customized for upright, canister, and central vacuum cleaners.

Solvent Kleene, Inc.    Peabody, MA 01960-5146
Sep 03, 2010 Biodegradable, non-flammable, non-corrosive, and non-reactive, D-Greeze 7880 is compatible with most existing degreasing methods and equipment, including immersion tanks, parts washers, and spray wands. It is designed to perform at room temperature, and comes in 5 gal pails, 55 gal drums, and 275 gal totes. With neutral pH, product works with all painted and unpainted ferrous and non-ferrous metals, including aluminum, anodized aluminum, carbon steel, and stainless steel.

Daimer Industries Inc    Woburn, MA 01801
Aug 31, 2010 Combining fume-free engineering with non-portable design, Vapor-Flo® 8850 Pressure Washers are rated for pressures to 2,030 psi and temperatures to 175°F. Electric pressure subsystem is based on 3.0 hp commercial grade motor and direct drive/continuous-use pump. Steel coil design, offering 25.0 kW heating capacity, converts water to max heating temperature in 30 seconds. Configured for 3-phase, 440 V, 60 Hz power output, washers provide water flows of 1.4 gpm to maximize cleaning strength.

Dow Chemical Co., The    Midland, MI 48674-0001
Aug 19, 2010 Designed for removing developer residues from aqueous alkali strippable dry films, Ronaclean(TM) EVP-206 is free from complexing agents and does not require special waste treatment processing. It is compatible with pattern plating processes and prevents dry film attack, eliminating ragged circuit lines and undercut at dry film foot. Formulated to be environmentally friendly, biodegradable product features properties that lend to cleaning power, wettability, and rinsability.

Chemtronics, Inc.    Kennesaw, GA 30152
Aug 17, 2010 Suited for cleanroom and equipment maintenance or any applications were lint can be detrimental, Poly-Onyx(TM) ESD Wipes are made from black monofilament polyester no-run knit for strength, absorbency, and chemical compatibility. Black color makes wipes suited for inspecting translucent or light-colored soils and dusts as well as makeup on cleanroom workers. Static dissipative fibers, also woven into fabric, safely relieve potentially damaging static charge.

Chemtronics, Inc.    Kennesaw, GA 30152
Aug 17, 2010 Featuring pointed head, Cottontips(TM) MicroPoint Swab is designed for cleaning applications where absorbency is critical. It consists of cotton fibers tightly wrapped around handle made from cleanroom-grade composite material. Also available, Cottontips Precision Swab consists of cotton fibers which tightly wrapped around wooden handle. Both exhibit minimal linting and maintain their strength, especially when saturated with water.

Lincoln Industrial    St. Louis, MO 63120 1578
Aug 16, 2010 Constructed of steel and die-cast aluminum, Models MV5565 and MV5570 use compressed air to remove and prevent fuel injector deposits, as well as loosen and dissolve carbon on throttle plate and intake manifold and valves. Pressure gauge and adjustable regulator combination ensures proper delivery of cleaning solution. Both can be used with Mityvac Pro Fuel System Tester, however, MV5565 includes connection hose and can operate independently.

Smart Sonic Corp.    Van Nuys, CA 91405
Aug 16, 2010 Defoamer product allows 440-R SMT Detergent to be used effectively in spray-in-air type stencil cleaner machines. Featuring no VOCs and no hazardous ingredients, defoamer allows low-temperature cleaning and shortens cleaning cycles while eliminating vapors and foul odors. It also allows flexible waste management by either filtration, evaporation, or hauling.

Sealeze    Richmond, VA 23237 2206
Aug 16, 2010 Protecting railroad switches from debilitating effects of snow and ice, SnowProtec(TM) consists of brushes with filaments facing up and down - angled from top of rail ties on outside to top of rail along switch tongue's movable part. Brush provides protection against snow drifting while making switch-heater more effective and efficient by enhancing retention of heat from pre-warmed switches. Due to its design, product can be left in place year around.

Smart Sonic Corp.    Van Nuys, CA 91405
Aug 13, 2010 Fully automatic and programmable, ErgoSonic facilitates front-loading of stencil at safe and comfortable height and does not require stencil basket. System is compatible with closed-looped cleaning chemistries, is completely self-contained, and does not require drain. Ultrasonic wash, rinse, and optional dry cycle is completed in minutes, and user never comes in contact with cleaning chemistries, vapors, or contaminated waste streams.

Smart Sonic Corp.    Van Nuys, CA 91405
Aug 13, 2010 Model 6000-LC, Large Capacity Stencil Cleaner is suitable for backplane, motherboard, and other large stencils up to 30 x 60 in., and can be modified to accommodate stencils as large as 40 x 72 in. Low-profile unit features adjustable loading height to simplify loading and unloading, as well as touchscreen programmable controller that stores multiple cleaning profiles. Model 6000-LC cleans any type of solder paste from any fine-pitch aperture.

Smart Sonic Corp.    Van Nuys, CA 91405
Aug 13, 2010 Available in ready-to-use spray bottles, 440-R SMT Detergent replaces hazardous solvents with safe, water soluble detergent that cleans effectively to optimize print production. RoHS-compliant product eliminates noxious odors and hazards associated with solvent cleaning. It is non-flammable, has no VOCs, and is safe on all metals and plastics.

Daimer Industries Inc    Woburn, MA 01801
Aug 12, 2010 Intended for hard surfaces and challenging jobs in indoor environments, mobile Vapor-Flo® 8610 series uses electricity to generate heat to 205°F and pressure levels to 1,880 psi and can generate 1.0 gpm water flow. Systems can clean with hot and cold water and incorporate integral coil system that turns cold water hot in ~30 sec. Available in 60 Hz, 440 and 480 V designs, products come in all-stainless steel case and employ heavy-duty electrical motor and direct drive pumps.

Daimer Industries Inc    Woburn, MA 01801
Aug 12, 2010 Powered by 3.0 hp motors, portable Vapor-Flo® 8810 series uses electricity to produce pressure to 2,030 psi and heat water to 175°F. Exhaust-free products, offered in 60 Hz, 440 and 480 V versions, produce water flow to 1.4 gpm, offer heated and unheated cleaning, and can be deployed in indoor environments. Heating system uses stainless steel pressure coil capable of turning cold water hot in under 1 min. Units come with 15° industrial pressure nozzle featuring embedded filter.

CFR    Fort Worth, TX 76140
Aug 11, 2010 Suited for facilities implementing green cleaning systems and/or seeking LEED certification, CFR Carpet Extractors recycle and filter water/solution while removing soil from carpets and fabrics. Low-moisture atomization wand, which also has rollers to glide over carpets, eliminates strenuous pushing and pulling. Models include 10-gal Eco 500 with adjustable pressure to 500 psi; 17-gal Pro 750, adjustable to 750 psi; 13-gal Pro 500, adjustable to 500 psi; and 25-gal Cascade, adjustable to 400 psi.

CFR    Fort Worth, TX 76140
Aug 06, 2010 Cascade 20 carpet extractor utilizes Continuous Flow Recycling technology that enables cleaning solution to be filtered and recycled, minimizing need to refill tanks significantly. It also uses moisture controlled wand technology to remove deep-down soils, leaving carpets thoroughly clean with rapid dry times.

Steinmeyer Inc.    Bedford, MA 01730
Aug 06, 2010 Available in diameters from 12-125 mm, Combination Wipers consist of friction type finger wiper in front of felt wiper, which provides optimal sealing. Since felt is saturated with oil, product offers low-maintenance solution for machine designers. Redesign of wiper housing keeps felt wiper from shifting or rotating, preventing contaminants from entering ball nut while simultaneously lubricating ball screw.