Daimer Industries Inc    Woburn, MA 01801
Apr 05, 2011 Combining industrial extraction system with EPA complying disinfection unit for large residential and commercial applications, 50 Hz KleenJet® 5050CVP Steam Cleaners deliver pressure levels to 8.3 bar, steam temperatures to 176.1°C, and 15 liters of total water volume. Built-in ATIS® sanitizing subunit, designed with ionizing germ-stopping technology, is effective on variety of dangerous microorganisms, ranging from mold to salmonella to MRSA staph germs.

Daimer Industries Inc    Woburn, MA 01801
Mar 31, 2011 Employing 5.0 hp electric motor and pump system, butane burning Super Max(TM) 12200B series removes high volumes of gum wads from stone surfaces such as sidewalks, driveways, pavers, and floors. Each wet steam power cleaner ships mounted on wheels but can also be trailer mounted. Able to generate nearly 2,000 psi, this 220-240 V series requires only one power cord and provides water flows up to 4.0 gpm. Trio of cleaning modes include 330°F wet steam.

U. S. Polychemical Corporation    Chestnut Ridge, NY 10977
Mar 31, 2011 Offering direct replacement for solvents such as acetone, MEK, xylene, toluene, and methylene chloride, Polychem Acrastrip® 600 B and G Mod Auto cleans, strips, and flushes both solvent-borne and waterborne coatings. Surfactant-based product is non-flammable, non-hazardous, and HAPS-free. Also reusable and recyclable, Acrastrip 600 can clean pumps, guns, bells, disks, and recirculation lines. Product is available in 1, 5, and 55 gallon containers as well as textured wipes.

Daimer Industries Inc    Woburn, MA 01801
Mar 30, 2011 Featuring unheated design for delicate fabrics and upholstery, XTreme Power® XPC-9200U-300 Series provides pressures to 300 psi, water lift of 150 in., and 200 cfm airflow. For jobs that require heat, carpet shampooer systems can accept 140°F water. Suction/extraction systems are powered by paired, 2-stage, all-electric motors. Incorporating Low-Flowing/Quick-Drying technology, equipment slashes drying times to 6 hours for rugs and less for upholstery fabrics.

Daimer Industries Inc    Woburn, MA 01801
Mar 29, 2011 Designed to accept 3-phase, 60 Hz, 380 V power, Ultra 8338-360 CP Series generates peak pressure level of 120 psi and peak temperature of 329°F. Units are manufactured with commercially designed water capacities of 14 L for boiler, 10 L for automated refilling system, and 10 L chambers for cleaning solutions and detergent. ATIS® technology kills more than 99.9% of tested microorganisms, such as mold and potentially fatal MRSA staphylococcus bacteria.

Daimer Industries Inc    Woburn, MA 01801
Mar 29, 2011 Designed to clean heat-sensitive and fragile materials such as wool, non-heated 50 Hz XPC-9250 Series includes models capable of operating at peak pressure levels of 17.24 and 20.6 bar. Units incorporate water lift specifications of 381 cm and flow rate of 94.4 L/s. For cleaning sturdier surfaces, carpet extractors will accept heated solutions up to 98.9°C, when added by machine operator.

General Equipment Co.    Owatonna, MN 55060 0334
Mar 25, 2011 Used for removing tough floor coverings, CTS12 Rip-R-Stripper(TM) acts as tool carrier for electric-powered breakers with ratings from 30-45 lb-ft of force. Direct-impulse force supplies power needed to break through bond strengths of mastics, glues, and thin-set materials. Designed for maneuverability, control, and visibility, configuration lets users operate electric-powered breakers in upright position. Blow force angles are adjustable to accommodate varying materials and bond strengths.

Daimer Industries Inc    Woburn, MA 01801
Mar 25, 2011 Featuring 440 V, 50 Hz design, all-electric Vapor-Flo® 7500 Series produces minimal noise and no exhaust. Units provide pressure levels up to 130 bar with flow rate of 2.3 lpm and cleaning temperatures up to 96°C. Two-Temperature modes allow units to clean variety of surfaces with either cold or hot water. Housed in industrial-grade steel case with chemical-resistant coating, machines come with foam lance injection system for dispersing cleaning solutions.

Daimer Industries Inc    Woburn, MA 01801
Mar 25, 2011 Rugged, 12 in. floor wand, available for 50 and 60 Hz, as well as heated and unheated XTreme Power® carpet cleaners, is designed to maximize suction for carpet cleaning machines. Unit's extraction force is enabled by plastic that creates optimal seal on carpet, which generates grip needed for suction. Floor heads are lightweight, chemical-resistant, and self-adjusting to offer seal at variety of angles.

Daimer Industries Inc    Woburn, MA 01801
Mar 18, 2011 Featuring 440 V, 50 Hz configuration, Vapor-Flo® 7500 series operates with minimal noise and non-existent fumes. Steel, coil-based heating unit can deliver max temperatures in 15 sec. Portable models 7500, 7525, and 7575, as well as stationary unit 7550, offer pressure level ratings of 130 bar and flow rates of 2.3 Lpm. While entry level 7525 is housed in rust-resistant steel case, other models come in powder-coated housing. All are driven by 50 Hz, 2.0 hp, industrial-duty motor.

NLB Corporation    Wixom, MI 48393 2824
Mar 17, 2011 Producing water pressures up to 40,000 psi from rotating nozzles, SRT-10-W Crawler removes coatings and scale. It is operated via wireless control by personnel on ground from as far as 1,500 ft away. Moving up, down, and across tall structures, product strips surfaces down to bare metal at reported removal rates of up to 2,000 ft²/day without exposing personnel to risk of falling. It does not use any abrasive and has vacuum recovery to contain water and debris.

Ruwac Industrial Vacuums    Holyoke, MA 01041
Mar 17, 2011 Operating off propane power source backed by Kawasaki® engine, Model PV 10 is completely independent of power cords and air lines. Portable unit features fiberglass frame, heavy-duty casters, and foot-actuated drop down dustpan and filter shaker system. To extend vacuum cycles, system is equipped with MicroClean filter that is 99.9% efficient at .5 micron. Optional DOP tested and certified HEPA module with 99.9% efficiency at .3 micron is also available.

Daimer Industries Inc    Woburn, MA 01801
Mar 09, 2011 With flow rates of 4.0 gpm, Super Max(TM) 12200 Series can produce as much as 2,000 psi with 5.0 hp NEMA electric motor. Power washers support 3 temperature cleaning modes, including 330°F wet steam option designed for chewing gum. Heated with propane, 220-240 V machines include direct spark ignition and ship with empty 50 lb propane tank. All models support use of cleaning additives via high-pressure chemical infusion system. Units are on wheels and can be trailer mounted.

Daimer Industries Inc    Woburn, MA 01801
Mar 08, 2011 Supplied with nozzles that produce different spray patterns, Super Max(TM) 6000B can clean with cold or heated water and wet steam. Continuous-duty machines, housed in heavy-duty, powder-coated steel, provide powered cleaning with temperatures as high as 330ºF. They can turn cold water into hot in under 1 min and support chemical cleaning with siphon-style infusion system. For pressure generation to 750 psi, machines employ .75 hp motor and direct drive pump unit. Rated flows reach 1.4 gpm.

Solvent Kleene, Inc.    Peabody, MA 01960-5146
Mar 08, 2011 Used in immersion tank, D-Zolve 917 safely removes organic paints, varnish, mil-spec CARC paints, cured powder coatings, multi-layer coatings, and E-coatings. Non-flammable solution, which has no ozone depleting components or carcinogenic compounds, penetrates paints and coatings to break bond between paint layer and substrate. Severing this bond causes paint or coating to delaminate and fall off substrate and drop to bottom of tank. Use eliminates need for sand blasting and burn off.

Daimer Industries Inc    Woburn, MA 01801
Mar 04, 2011 Pro Plus 350CS, 50 Hz auto detailing steam cleaners include 2 L refillable chamber than can be filled while machine is on, as well as 2 L boiler that can achieve temperatures of 154ºC. Machines reach top operating temperature in as little as 10 min, depending on temperature of water before heating, and utilize variable pressure technology that allows users to adjust pressure up to 5.2 bar. Measuring 41 x 30 x 25 cm, 1,600 W systems also include 3.5 m hoses.

Nu-Star, Inc.    Shakopee, MN 55379
Mar 03, 2011 Able to clean windows, frames, and exterior of buildings at rate of 17,000-35,000 ft²/hr, Sky Pro® Window Cleaning System has optional dual fan package designed to push brushes against building to optimize scrubbing pressure. Fan package can eliminate need for counterweight arm and is recommended for use on buildings over 30 stories tall, in windy areas, or on buildings subject to unexpected wind gusts. For Green cleaning, Sky Pro uses only filtered water without chemicals or soaps.

Daimer Industries Inc    Woburn, MA 01801
Mar 03, 2011 Combining EPA-compliant sanitizing unit with institutional-grade extraction, 50 Hz KleenJet® Supreme 3050CVP Steam Cleaners sanitize surfaces and kill drug-resistant microbes. Units offer up to 7.6 bar cleaning pressure and temperatures reaching 176.1°C. Built into boiler, ATIS® sanitizing subsystem is designed around ionizing antibacterial architecture that disinfects surfaces. Engineered for wet and dry applications, vacuum systems provide water column lift of 2,200 mm.

Daimer Industries Inc    Woburn, MA 01801
Mar 02, 2011 Measuring 2 ft x less than 3 ft, Super Max(TM) 7000B series uses butane to achieve temperatures effective for removing gum wads from stone, asphalt, and concrete. Unit relies on one power cord for included 1.5 hp motor, which operates using single-phase, 60 Hz, 110-120 v power. Able to generate pressures approaching 1,000 psi in standard use and rated for 2.5 GPM water flows, washers offer 3 cleaning modes, including high-temperature (up to 330°F) wet steam mode.

Daimer Industries Inc    Woburn, MA 01801
Mar 02, 2011 Powered and heated with electricity, 50 Hz Vapor-Flo® 7275 Series is suited for use in exhaust-sensitive environments. Units generate 1,450 psi and offer flow rates of 1.5 lpm, minimizing water waste. Direct drive machines are designed for continuous use and can clean with either cold or hot water, which reaches max temperature of 79.4°C. Equipped with front loading chamber, washers can be manually refilled when operators are working away from water source.