Boker's Inc.
Minneapolis, MN 55406
Nov 06, 2009 Available without tooling charges in short, medium, or long runs, Washers range in size from 0.080-12 in. O.D. They come in choice of more than 2,000 commonly specified and hard-to-find materials, including low carbon sheet steel, 5 types of spring steel, stainless steel, aluminum, brass, copper, and nickel silver. Non-metallics, such as ABS, acetal, polyester, nylon, PTFE, polycarbonate, fiber, polyethylene, and various phenolics are also available.

Minox/Elcan
Mamaroneck, NY 10543
Nov 06, 2009 Available in up to 5 decks, Minox MTS 2600 tumbler screening machine is suited for difficult to handle or delicate, friable materials from 20 Micron to 20 mm. Gentle tossing motion prevents particles from being hammered into screen cloth. Motor driven rotary brushes, motor driven air knives, combination of both or bouncing balls eliminates screen blinding.

Global Trash Solutions
Lake Park, FL 33403
Nov 06, 2009 Combining trash compactor and cardboard baler, Model GTS 2000 is capable of reducing trash volumes by 80% or more. Compactor is coated with Kevlar-based polyethylene fiber that makes it virtually indestructible. Powered by hydraulic pump and electric motor, system is operated by computer technology, which allows it to be fully programmable.

Pregis Corp.
Deerfield, IL 60015
Nov 05, 2009 Able to handle both clean and dirty PE foam, Desinator(TM) Compactor helps minimize landfill and facilitates recycling. PE plank scrap is fed into hopper, shredded, compacted, and then run through light heating process. Material is compressed to 1/15th original size, resulting in high-density PE log measuring 6 x 6 x 48 in. with thin rigid outer shell. Logs can then be fed directly into most plastic reclaim systems. Unlike bailing systems, Desinator(TM) requires no strapping.

Emco Industrial Plastics, Inc.
Cedar Grove, NJ 07009
Nov 04, 2009 SUSTARIN® C MDT is acetal with additives that allow it to be traced by standard metal detectors and removed before causing food contamination. Mechanical, thermal, and chemical resistance properties are same as standard acetal and its dimensional stability is suitable for close tolerance parts on machinery. Available in rods with ¼-8 in. dia and sheets from 3/8-4 in. thick, blue-colored product complies with FDA regulations for direct contact with food.

SABIC Innovative Plastics
Pittsfield, MA 01201
Nov 03, 2009 Optimized for high melt flow without any decrease in toughness, Lexan HFD resins also exhibit ductility that does not negatively affect melt flow. Chemistry permits use down to -40°C and combines 2 monomers to ensure performance in demanding applications. Offered in 5 grades with up to 5% bio content and with/without UV stabilizers, resins allow for creation of thinner-wall parts without risk of cracking upon mold removal. Properties also reduce molded-in stress to avoid birefringence.

EXAIR Corporation
Cincinnati, OH 45249-1621
Nov 02, 2009 Powered by compressed air, Chip Trapper(TM) cleans solids such as chips, swarf, and shavings out of used coolants and other liquids. Unit vacuums coolant or liquid that is filled with debris into included 55-gal drum, trapping all solids in reusable filter bag. With turn of flow valve, clean liquid pumps back out. Safe operation is assured with built-in pressure/vacuum relief and automatic safety shutoff valve that prevents spills or overfilling.

Kochek
Putnam, CT 06260
Nov 02, 2009 Aluminum strainer is designed with self-leveling float system that makes drafting possible under almost any condition. Product offers high intake ratio that allows for maximum volume flow rates, while its vortex shield protects against whirlpooling. Transport and deployment is simplified by balanced handle and lightweight design. It is available with threaded, Storz, or camlock connections in range of sizes.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 29, 2009 Low viscosity, optically clear, two part epoxy compound, EP30LV-1 is formulated to cure at room temperatures, and forms bonds with both similar and dissimilar materials including metals, glass, ceramics, wood, vulcanized rubbers and many plastics. Electrical insulator adhesive requires only contact pressure for curing. Suitable applications include optical, electronic, electrical, computer, metalworking, appliance, automotive and chemical industries.

Emco Industrial Plastics, Inc.
Cedar Grove, NJ 07009
Oct 28, 2009 Available in ½-8 in. diameter rod and ¼-4 in. thick sheet, Polystone® M Soft offers gentle sliding properties and abrasion resistance. Friction between product being conveyed and material that it comes into contact with is kept to minimum. UHMW-PE material is suited for timing screws, sprockets, change parts, star-wheels, roller, guides, and profiles.

Rehm Thermal Systems
Blauberen   Germany
Oct 27, 2009 RDS Drying Systems offer thermal oxidation process designed to eliminate challenge of residue contamination stemming from photovoltaic metallization in order to minimize maintenance and provide cleaner process chamber. Process involves heating gas to temperature greater than 500°C, while arrangement of heater and granulate pack lend to space and energy consumption reduction. In order to oxidize hydrocarbons, catalyzers are installed downstream from heating chamber.

Engineered Concepts, Llc
Farmington, NM 87499
Oct 27, 2009 Vapor recovery system alternative (VRSA) is designed for effective and reliable capture of tank vapors. Virtually eliminating flaring and venting, scalable system monitors and controls compressor, tank, and process. Capture of rich vapors helps increase operator profits while eliminating known emissions associated with natural gas production. System can also produce ROI on well pads producing as low as 50 Bbl of condensate per day.

Palmer Manufacturing & Supply, Inc.
Springfield, OH 45504
Oct 26, 2009 Suitable for removing foundry particulate emissions, Scrubbers come in 2,500, 4,000, 6,000, 10,000, and 20,000 cfm models. Units provide 99% removal efficiency with inlet loading of 335 ppm. Fabricated from polypropylene, scrubbers feature vertical design, automatic charging and pH monitoring, and color touch screen. HMI Ethernet communication is available and hinged window kit is optional.

Eriez Magnetics
Erie, PA 16514
Oct 26, 2009 Offering responsible method for safe recovery and recycling of e-scrap materials, multi-stage EcoTowerSort(TM) can be used for sorting of aluminum, stainless steel, copper cables, and heavy fractions. Machines are available in widths of 24-118 in. with choice of bottom or top blowing discharge designs. Utilized within vertically stacked system, modular sorting technologies can include rare earth drum separators, eddy current separators, inductive sensor sorter, or any combination thereof.

Hydramaster
Mukilteo, WA 98275
Oct 22, 2009 Under full vacuum load, Titan 575 can endure up to 40 minutes of inactivity without dumping from fresh water tank. It employs pushbutton-start, electronic ignition, liquid-cooled Daihatsu engine rated to 31 hp with Tuthill Tri-Lobe vacuum blower and generates 4.0 gpm volume, 1,200 psi heated pressure, and 2,000 psi non-heated pressure. Multiple engine speeds are possible, and system comes standard with two 2 in. connections for dual-wand capability.

Security Engineered Machinery Co., Inc.
Westboro, MA 01581
Oct 20, 2009 Based on rotary knife mill in which blades are mounted on solid steel rotor and stationary bed, Models 200 and DS-200 destroy paper, CDs and DVDs, key tape, floppy disks, audio cassettes, ID badges, and credit cards. Dual-stage DS-200 has built-in shredder that can accept 14 sheets of paper with no need to remove staples or paper clips. Measuring 59 x 51 x 25 in., both include 2 x 9 in. feed opening, waste-evacuation/dust-collection system, and 100 35-gal waste collection bags.

Solutia, Inc.
Saint Louis, MO 63166
Oct 20, 2009 With light transmittance level of 0%, Vanceva Absolute Black adds privacy and balance to interior and exterior laminated glass applications. Opaque PVB-based interlayer can be used as single layer in glass laminate or combined with colored interlayers. Applications range from residential doors, side-lites, and transoms to kitchens and baths, partitions, and conference rooms.

Mott Corporation
Farmington, CT 06032 3159
Oct 15, 2009 Capable of accommodating flow rates of 300 and 650 sLpm in standard filter lengths of 3.31 or 5.0 in., respectively, High Flow Defender Series filters attain filtration efficiencies at 9 LRV (99.9999999% efficiency) down to 0.003 µm particles sizes. Porous metal filters are suited for use in semiconductor, flat panel display, and photovoltaic industries.

Momentive Performance Materials
Strongsville, OH 44149
Oct 12, 2009 Available in high consistency rubber and liquid silicone rubber, silver-based StatSil Elastomers offer built-in antimicrobial protection making them suited for medical, pharmaceutical, cosmetics, and food industries. Products offer resistance to chemicals, provide biocompatibility, are virtually odorless, and are available with many international recognized approvals such as USP Class VI, ISO 10993, BfR and FDA.

Material Transfer & Storage, Inc.
Allegan, MI 49010 0218
Oct 09, 2009 Suited for applications with limited headroom or floor space, Container/Bulk Bag Densifier is designed to automatically fill containers or bulk bags by weight, and settle contents. Sanitary type 304 SS construction with continuous TIG welds and no tube penetrations allow for quick, thorough wash-down cleaning, while floor mounted stainless steel machine guard protects NTEP approved weigh modules. Programmable system features stainless steel conduit and pneumatic piping.