Maguire Products, Inc.    Aston, PA 19014
May 01, 2013 Producing uniform granulate with minimized dusting, Purging Recovery System™ (PRS) optimizes efficiency of granulating polystyrene, flexible vinyl, and other polymers that might otherwise degrade under shear forces of size reduction, causing backup or clumping. In PRS, rotor planer uses 12 knives to slice or plane rock-like purging into small chips. Then, second-stage granulator with 0.250 in. holes in screen reduces chips to regrind. Air generated by blower cools material, preventing melting.

JWC Environmental    Costa Mesa, CA 92626
Apr 19, 2013 Featuring max horsepower of 100 hp, Monster Industrial 7 SHRED Grinder comes in 3 cutting chamber sizes of 30, 40, and 50 in. with 10 in. diameter cutters. Unit is horizontally mounted on stand with custom-designed hopper to allow feed of solids from conveyor, sluice, or manual feed. Offering variety of cutter type and thickness options, shredder can process solids such as rocks, wood, plastics, bone, and food waste. Shaft seal options enable operation in dry or pressurized wet applications.

Modern Process Equipment, Inc.    Chicago, IL 60623
Dec 11, 2012 Model 1060 Gran-U-Lizer grinds Superabsorbent Polymers (SAPs) with precise particle uniformity at 20 x 100 US Mesh (850 x 150 µm) size range and 30 x 100 Mesh (600 x 150 µm) with minimal fines. In addition to predicting bearing failures before they occur, included BAVA (Balance and Vibration Analysis) system senses when product moisture levels elevate beyond tolerable range by recognizing material elasticity change and immediately notifies plant personnel.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Aug 08, 2012 Exceeding government requirements for destruction of Top-Secret/Classified data, high security Model 344 accepts up to 8 sheets of paper at a time and reduces it to 0.8 x 2.5 mm particles. Electronically controlled safety flap in 10 ¼ in. feed opening prevents fingers from entering cutting area, while auto-reverse/shutdown system prevents paper jams. Unit also shuts down if 28 gal waste bin is full, door is ajar, or shredder has been idle for 30 minutes.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Jul 20, 2012 Exceeding requirements of NSA/CSS 04-02 Standards, Model 0202 OMD reduces discs to 2.0 x 3.9 mm particles. Unit features Auto Sync dual voltage capability and 2 power cords for operation on 110-120 V/60 Hz or 220-230 V/50 Hz power. Measuring 32 x 20 x 18 in., shredder includes top feed opening and casters for maneuverability. Unit is controlled via touchscreen that provides operational status information, and automatically shuts down if waste bin is full or door is ajar.

UNTHA shredding technology    Kuchl A-5431  Austria
May 13, 2011 Intended for extreme-duty applications requiring high throughput and availability, RS150 employs dynamic and energy-conserving UNTHA Torque Drive that ensures cutting shafts are stopped immediately when foreign materials enter system. Drive, which works without wear parts, also makes frequent reversing possible to accommodate difficult materials. Varying speed of rotation of cutting shafts allows throughput to be adapted to specific materials.

Shred-Tech    Cambridge, ON N1T1B2  Canada
Apr 04, 2011 Featuring twin-screw angled compactor and moving floor loading system, Model MDX-1 switches between standard and high-security modes with touch of button, achieving throughputs up to 6,500 lb/hr and 2,500 lb/hr, respectively. Gripper Tipper® retractable bin tunnel loading system allows for ground or curbside loading of any industry standard container, while Plus 1® micro-control system provides real-time video of shredding process.

Weima America, Inc.    Fort Mill, SC 29715
Nov 11, 2010 Available in rotor widths of 1,000, 1,500, and 2,000 mm with rotor diameter of 450 mm, WLK Series Single-Shaft Shredders deliver rotational speeds up to 150 rpm. Units come equipped with interchangeable pressing system, designed to handle variety of requirements, including lumps, film, and hollow molds. Hydraulically driven swivel screen basket helps prevent jamming of material between rotor and inner screen wall.

UNTHA shredding technology    Kuchl A-5431  Austria
Sep 02, 2010 Shredders RS30 and RS40 incorporate maintenance-free mechanical seals, wear plates, central lubrication system, electronic oil level monitoring, and screen quick change system to ensure reliability. Steel frame, featuring integrated mounting flange, facilitates integration into complete systems. While control panel attached directly to machine facilitates use, hopper design enables machine to be charged from all 4 sides.

Schutte Buffalo Hammermill    Buffalo, NY 14240
Aug 19, 2010 Custom-configurable to suit material and production goals, MP Series comes in 5 sizes constructed from ¾ in. A-36 carbon steel. Industrial Shredder offers 30-125 hp range and, depending on application, throughput capacities to 10 tph. While cutting rotor features 4-way reversible tool steel cutting teeth, hopper allows for dump and go unattended operation. Retractable ram and hydraulic logic system controls rate that material is pushed against grinding rotor to prevent jamming.

Shred-Tech    Cambridge, ON N1T1B2  Canada
Aug 06, 2010 Featuring legal payload up to 14,000 lb, Model MDS-30GT is based on ST-15H shredder with cast aluminum body components and high-strength steel alloy knives and shafts. Plus 1® micro-control allows for remote diagnostics, auto-shutdown, and advanced predictive idle, which detects low shredder loads in unattended shredder with empty hopper. Systems' tunnel ensures containers stay completely enclosed during loading, protecting material in bins from elements and prying eyes.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Aug 03, 2010 Measuring 37 x 45 x 21 in., Model 0300 Jackhammer(TM) destroys hard drives as well as electronic devices, optical media, and computer backup tapes. Sawtooth, hooked cutters reduce 125-500 drives per hour to 1 ½ in. shreds. Designed for offices, unit plugs into standard 120 V/20 A, single-phase wall outlet and is mounted on locking swivel casters for portability. Feed door accepts drives up to 1 in. thick, and key is required for operation, ensuring use only by authorized personnel.

UNTHA shredding technology    Kuchl A-5431  Austria
Jul 27, 2010 Specifically designed for wood, plastics, and paper recycling industries, VR Series features fail-safe cutting system, constant material feed, and maintenance-free pusher system. Touch screen panel simplifies operation, while gear unit, integrated into rotor, eliminates problems of shaft stubs. Drive design allows for high throughput with low drive power.

Cumberland Engineering Corp.    South Attleboro, MA 02703
Jul 20, 2010 Including integrated rotating end discs for low-heat granulation, 1000 Series beside-the-press granulators suit robot feed, conveyor feed, or hand feed applications. Features include pivoting hopper, drop-down removable screen cradle, HCHC knives, oversized solid flywheel, and machined and bolted cutting chamber. Scissor cutting action is achieved with three-knife, open rotor with scooped wings and slant-cut knives combined with counter-slanted stationary knives.

Modern Process Equipment, Inc.    Chicago, IL 60623
Jan 26, 2010 Turkish granulizer MPE G7 reduces coffee to espresso quality with grinder, and then discharges coffee into final grinding section directly. Combining roller technology with disc technology, unit achieves average Turkish grind sizes ranging from 50-150 µm at capacities spanning 100-250 kg/hr.

Security Engineered Machinery Co., Inc.    Westboro, MA 01581
Oct 20, 2009 Based on rotary knife mill in which blades are mounted on solid steel rotor and stationary bed, Models 200 and DS-200 destroy paper, CDs and DVDs, key tape, floppy disks, audio cassettes, ID badges, and credit cards. Dual-stage DS-200 has built-in shredder that can accept 14 sheets of paper with no need to remove staples or paper clips. Measuring 59 x 51 x 25 in., both include 2 x 9 in. feed opening, waste-evacuation/dust-collection system, and 100 35-gal waste collection bags.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Jul 15, 2009 Utilizing spherical shredding mechanism, SUPER SHREDDER® in-line disintegrator cuts and shears sewage solids into fine bits. Hard faced stainless steel cutters feature 1-piece, replaceable design and offer wear resistance. Because of spherical rotor design, SUPER SHREDDER has less moving parts than units with banks of cutter disks and therefore requires minimal maintenance. System includes S-250 Auto-Reversing control, which senses jam conditions and automatically reverses.

Vecoplan, LLC    Archdale, NC 27263
May 20, 2009 Equipped with 10.25 yd³ hopper featuring 70 x 82 in. opening, RG70PK securely destroys large volumes of unwanted products and electronic scrap as well as traditional paper documents. HiTorc(TM) Magnetic Pulse Drive delivers maximum torque across speed range, full speed control, reversing action, and controlled stop function. Built with extreme-duty construction, machine cross shreds in one pass to deliver consistent particle sizes determined by screen.

Komar Industries, Inc.    Groveport, OH 43125
May 20, 2009 Suited for construction and demolition sites, EM-PSC Auger shreds and compacts everything from pallets to white goods to dry wall to cement blocks. Electro-mechanical unit, equipped with 100 kW generator, is mounted on roll-off machine bed. Its 7.4 yd³ hopper accepts most kinds of construction debris, and 40 hp electric motor drives auger screw that shreds/compacts with 178,000 lb-ft of force. Unit fills 40 and 50 yd³ roll-off containers with typ loads of 8-14 tons.

Vecoplan, LLC    Archdale, NC 27263
May 19, 2009 Featuring 52 x 48 in. hopper opening, RG52U Shorty Shredder is designed specifically for wood residue, trip blocks, panel scraps, dunnage, cardboard and paper, and light plastics. Powered by 60 hp motor, shredder's 15 in. diameter rotor has 37 cutting inserts, turns at 120 rpm, and is fed by 2-speed hydraulic ram. Short feed ram maximizes utilization of space in new facilities or allows machine to be retro-fitted in tight areas.