Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Feb 07, 2006 ScreenMaster® ST, constructed of stainless steel, comes in various widths, heights, and screen openings to promote optimal degree of solids separation to meet application requirements. As solids accumulate into mat on screen, level sensor is activated, and unit is energized. Motor reciprocates bars, incrementally moving material up bar screen steps. When they reach top, solids fall off into bin, washer, or conveyor, and unit automatically stops in home position.

Kason Corporation
Millburn, NJ 07041
Jan 27, 2006 Dust-tight Batch Sifter, constructed with stainless steel housing, motor, and stand, is offered in 18, 24, and 30 in. dia and can be equipped with single or twin imbalanced-weight gyratory motors. With gap-free flange arrangement, unit scalps oversize particles down to 38 microns from dry bulk powders or solids-laden slurries and may be disassembled without tools for sanitizing. Wire mesh screening material is offered in 304, 316, and magnetic 400-series stainless steel.

Rotex, Inc.
Cincinnati, OH 45223 1845
Nov 11, 2005 Designed to maximize product recoveries at material temperatures up to 400°F, Minerals Separator(TM) features screen deck slope of 6° to meet glass, filter, and frac sand specifications. Elliptical-linear motion equally distributes materials to all screen decks, ensures uniform bed-depth across screen surface, and provides aggressive blinding control. Lift-Rail(TM) system with non-binding stainless steel cam activation facilitates screen frame installation and removal.

Kason Corporation
Millburn, NJ 07041
Sep 16, 2005 Equipped with single or twin imbalanced-weight gyratory motors, VIBROSCREEN® scalps oversize particles as small as 38 microns from dry bulk materials or solids-laden slurries. It meets cGMP, 3-A, USDA, and FDA standards and can be disassembled without tools for sanitizing. Offered with wire mesh screening in 304, 316, and magnetic 400-series stainless steel, unit is offered in 18, 24, and 30 in. dia. Crevice-free interior is finished to sanitary standards.

Kason Corporation
Millburn, NJ 07041
Aug 08, 2005 Circular Vibratory Fluid Bed Dryer-Screener System reduces bulk material moisture content, removes agglomerates and dust, and discharges on-size material into bulk bags. It consists of 18–84 in. dia circular fluid bed processor, heater, blower, and 18–100 in. dia circular vibratory screener. Vibration, induced by 2 vibratory motors and spring suspension, separates and fluidizes individual particles; undersize material is sent through spout for reprocessing.

Rockwell Automation
Milwaukee, WI 53204
Apr 19, 2005 Used with existing controllers, RS-232/DF1 port splitter connects to DF1 full-duplex port to allow simultaneous communication with local network and operator interface. Control users with one DF1 full-duplex port can use splitter to create one full­function port for 2-way communication between controller and local network. Primarily designed to run programming terminal or HMI, second port is respond-only.

Bunting Magnetics Company
Newton, KS 67114 0468
Apr 18, 2005 Sheet Fanners, designed for safe handling of sheet stock stacks, utilize non-electric permanent magnets to automatically fan sheets apart. By eliminating chance of jamming doubles into production equipment, product enables operators to safely handle one sheet at a time. All-stainless-steel units are self-contained and can be ganged to handle larger sheets. They come with carrying handles for portability and holes for permanent mounting.

Rotex, Inc.
Cincinnati, OH 45223 1845
Mar 15, 2005 Suited for handling powders, granules, agglomerates, and other free-flowing materials, Centrifugal Sifter processes particles ranging in size from ¼ in. to 44 microns. Rotating blades' spreading action distributes product around sieve cylinder for complete utilization of screen area and conveys oversize particles to discharge. Sifter operates quietly, and is totally enclosed with access doors to sieve chamber and all internal working parts.

Eriez Magnetics
Erie, PA 16514
Nov 08, 2004 Hi-Powr products fan hard-to-handle steel sheets without marring polish or paint. Completely enclosed, tamper-proof units utilize magnetic circuit to fan semi-sticky, oily, bent, and heavy-gauge sheet steel. They are built with U-shaped frames with stainless anti-friction strips and back cover. There are 3 strengths available in 4 functional heights; range covers applications to 1/8 in. thick steel sheets stacked to 14 in. high.

Abanaki Corp., Oil Skimmer Div.
Chagrin Falls, OH 44023
Nov 04, 2004 Chiperatorâ„¢ Chip and Coolant Separation System vacuums and filters old cutting fluids loaded with chips out of machine tool sumps into 55-gal drum. It separates chips from coolant and returns clean, filtered coolant to machine sump. Air-driven system with venturi design has no moving parts and strains 40 gal of chips and coolant/minute. Float valve shuts off unit when drum is full, and automatic pressure relief valve is provided for added safety.

Mayfran International
Cleveland, OH 44143-0038
Oct 11, 2004 ConSep® CrosBeltâ„¢ Coolant Cleaning Separator combines technologies of single-platform chip conveyor and coolant cleaning system with sloped bottom coolant tank integrated into vertical orientation. Large clean out portals at bottom facilitate sludge removal and cleaning. Since ports are located at bottom of tank, pump equipment and filter devices do not have to be removed and reassembled. Indexing filter drum removes chips and contaminates to 25 micron level.

Acromag, Inc.
Wixom, MI 48393 7037
Sep 07, 2004 AC/DC-powered 630T Series isolators and signal splitters feature internal excitation supply to drive up to two 2-wire transmitters or other input loop devices. Multi-channel isolators provide space-efficient solution to eliminate ground loops, filter signal noise, and block high voltage surges. Measuring 1 in. wide, single/dual-channel isolators receive 4–20 mA inputs and provide fully isolated 4–20 mA output signals.

Eriez Magnetics
Erie, PA 16514
Aug 09, 2004 Eddy Current Separators utilize Erium(TM) 3000 permanent, non-electric rare earth magnets in rotor element to separate non-ferrous materials in plastic, glass, electronics, wood scrap, recycling, and automotive shedder residue. When nonferrous metal passes over rotating separator at high speeds, eddy currents are created in nonferrous metal, generating magnetic field. When polarity of magnetic field is the same as rotating magnet, nonferrous metal is repelled from magnet.

Mi-T-M Corporation
Peosta, IA 52068
Apr 28, 2004 Intended for rental facilities that have access to sanitary sewer, Series WOS above-ground separator offers up to 30 gpm discharge. Unit lowers oil content in vehicle wash-water prior to discharge. It features ¾ hp inline srainer pump, aluminum cover, 304 stainless steel 3-chamber tank with oil coalescing grids, V-shaped bottom, oil decanter, and 20 g/day corona discharge ozone generator for quick kill of odor cauing bacteria.

Great Western Mfg. Co., Inc.
Leavenworth, KS 66048 0149
Feb 26, 2004 GyroSift is available with 1–3 sieves in choice of 3 sieve types. Suited for applications requiring small screen areas, it can be floor-mounted or suspended. Pneumatic, in-line, Model QA24 has smooth surfaces and snap-on neoprene gaskets that do not use adhesives. Net screen area is 4–10 ft² and capacity is 25–350 lb/min. Intended for high sanitation environments, system can be inserted into vacuum or dilute phase pressure pneumatic conveying system.

Pelletron Corp.
Lancaster, PA 17605 0142
Jul 08, 2003 Model P5 dust contaminant removal system cleans regrind and virgin materials that have been mixed together. Agitator controls material flow, and flux field generator produces low-power electromagnetic field, disrupting electrostatic bond between pellet and dust particles. With capacity of 500 lb/hr, Model P5 removes dust particles down to 100 microns. By separating plastic pellets from dust contaminants, manufacturers can reduce scrap rates and improve product quality.

VXI Technology Inc.
Irvine, CA 92614
Feb 24, 2003 Model SMP6905 incorporates six 2-way 0°, 10 MHz–1 GHz power splitters/combiners in high-density, double-wide SMIPIIâ„¢ module. When used as splitter, it delivers 2 outputs of equal amplitude with 0° phase relationship between 2 output signals. Module can be used as combiner by applying each signal into output ports and vector sum will appear as single output. Model SMP6905 can be combined with other SMIPIIâ„¢ switch modules to provide building blocks for RF test system.

Great Western Mfg. Co., Inc.
Leavenworth, KS 66048 0149
Jan 08, 2003 Tru-Balance Sifters are inserted into vacuum or pressure pneumatic conveying lines as quality assurance tools for removing small amount of oversized impurities from product. They utilize pneumatic sieve compression system to elevate and lower upper dome assembly. Systems offer rapid access for sifter inspection, have no heavy domes to lift or hoist, and provide accelerated sifter closing. All contact surfaces are stainless steel.

Hayward Industrial Products, Inc.
Elizabeth, NJ 07207
Sep 16, 2002 Series CLC Coalescers/Separators have 2-stage design that allows them to remove 99% of all liquid and solid particulate matter larger than 4 microns from air and gas streams. Units have no moving parts to fail or wear out. Applications include compressed refrigeration gases, evaporator overhead steam, high pressure gas at injection wells, fuel gas lines to engines in power and industrial plants, and regulator stations.

Mayfran International
Cleveland, OH 44143-0038
Jun 19, 2002 ConSep 2000® II combination, single-platform chip conveyor/coolant separator removes chips and contaminates to 50 micron level. Features include self-cleaning backwash filter system, and cleaner for particulate removal to 10-15 nominal micron level. FastPacâ„¢ Briquetter processes 110 to 6,614 lbs of metal chips per hour (depending on model) and transforms material into dense, dry briquettes. Coolant recovery removes up to 98% of residual coolant and cutting oils.