Flowserve Corporation
Irving, TX 75039
Sep 28, 2005 Available as either new equipment or as upgrade to existing hydraulic decoking systems, AutoShift(TM) combination cutting tool enables automation of hydraulic decoking operations. Mode shifting is accomplished remotely by water pressurization and depressurization, thus avoiding personnel exposure to high pressure water, hot spots or steam eruptions, hydrogen sulfide vapors, and mechanical hazards. Manual shift feature is also provided.

Donaldson Co., Inc.
Minneapolis, MN 55440-1299
Aug 25, 2005 DS Series removes condensate from compressed air system, wherever it forms, and discharges it in environmentally sound manner. When oil is present, condensate is purified to 100 ppm levels of residual oil content before discharged to public water treatment systems. Compressed air condensate oil/water separators feature multiple condensate inlet ports, tapered carbon bag chambers, knob-adjustable oil skimming tray, and attached, hinged lid.

Birchwood Casey
Eden Prairie, MN 55344 2138
May 17, 2005 Safe Scrub® OS lifts oil from iron and steel parts and then floats oil residue to liquid surface for removal from tank by oil skimmer or coalescing filter. Used as stand-alone cleaner or pre-cleaner, product is effective on mineral oil grinding coolants, drawing and stamping lubes, and hydraulic oils as well as water soluble/synthetic fluids and surface soils. Normal cleaning cycle calls for 5–10 min soak at 120 to 150°F.

Abanaki Corp., Oil Skimmer Div.
Chagrin Falls, OH 44023
Nov 04, 2004 Chiperatorâ„¢ Chip and Coolant Separation System vacuums and filters old cutting fluids loaded with chips out of machine tool sumps into 55-gal drum. It separates chips from coolant and returns clean, filtered coolant to machine sump. Air-driven system with venturi design has no moving parts and strains 40 gal of chips and coolant/minute. Float valve shuts off unit when drum is full, and automatic pressure relief valve is provided for added safety.

Mayfran International
Cleveland, OH 44143-0038
Oct 11, 2004 ConSep® CrosBeltâ„¢ Coolant Cleaning Separator combines technologies of single-platform chip conveyor and coolant cleaning system with sloped bottom coolant tank integrated into vertical orientation. Large clean out portals at bottom facilitate sludge removal and cleaning. Since ports are located at bottom of tank, pump equipment and filter devices do not have to be removed and reassembled. Indexing filter drum removes chips and contaminates to 25 micron level.

Eriez Magnetics
Erie, PA 16514
Aug 09, 2004 Eddy Current Separators utilize Erium(TM) 3000 permanent, non-electric rare earth magnets in rotor element to separate non-ferrous materials in plastic, glass, electronics, wood scrap, recycling, and automotive shedder residue. When nonferrous metal passes over rotating separator at high speeds, eddy currents are created in nonferrous metal, generating magnetic field. When polarity of magnetic field is the same as rotating magnet, nonferrous metal is repelled from magnet.

Separation Dynamics Inc.
Fountain Inn, SC 29644
Jul 27, 2004 SKIMZOILâ„¢ removes free-floating oils from washers, coolant sumps, and other process tanks. Floating suction head pulls oils from tank, which are trapped by weirs in separation tank and picked up by oil-attracting, rotating drum. Oils picked up by drum are scraped off with spring-loaded wiper tray and plumbed into separate waste vessel. Available in several sizes, system does not require frequent adjustment, monitoring, or flow balancing.

Separation Dynamics Inc.
Fountain Inn, SC 29644
Jul 21, 2004 Cellulose-based, Extran™ Ultrafiltration System, Model E removes free oil, emulsified oil, and particles from parts washing water and returns clean water and soluble detergent to wash bath. Portable, stainless steel unit is built on 3 x 4 ft skid with casters and can process 100–500 gpd. Unlike conventional ultrafiltration, Extran™ membrane requires no cleaning.

Graymills Corporation
Chicago, IL 60613
May 14, 2004 Model OSEP-2 portable fluid-conditioning filtration system and oil/water separator removes tramp oils from water-based coolants used in machining centers. Featuring 17 gal capacity and heavy-duty casters, system can be moved throughout plant. It helps keep bacteria levels to minimum, as well as smoking caused by oils in coolant coming in contact with hot tooling. Model OSEP-2 requires 50 psi for operation; no electrical connection is needed.

Uni-Wash Inc. - The Industrial Ventilation Group
Harbor Springs, MI 49740
May 05, 2004 Wet collector is powered by four 10,000 cfm direct driven fan assemblies and offers low profile. Motor and water level controls are wired into UL-approved electrical enclosure and mounted on machine, while sludge conveyor is also pre-mounted and tested for operation.

Mi-T-M Corporation
Peosta, IA 52068
Apr 28, 2004 Intended for rental facilities that have access to sanitary sewer, Series WOS above-ground separator offers up to 30 gpm discharge. Unit lowers oil content in vehicle wash-water prior to discharge. It features ¾ hp inline srainer pump, aluminum cover, 304 stainless steel 3-chamber tank with oil coalescing grids, V-shaped bottom, oil decanter, and 20 g/day corona discharge ozone generator for quick kill of odor cauing bacteria.

Westfalia Separator, Inc.
Northvale, NJ 07647
Jan 26, 2004 With gas-tight design suited for miscella refining and biodiesel production, RSE 300 uses 4,800 rpm motor and inverter with VFD drive, eliminating need for gears, clutches, and belts. Design has 50,000 kg/hr capacity in refining and degumming and minimizes number of necessary bearings.

Redi/Controls, Inc.
Greenwood, IN 46143 1406
Nov 21, 2003 Industrial OAM Purger removes oil, acid, and moisture from chiller's refrigerant charge down to trace levels. System is available with NEMA 4 or Hazardous Area control enclosure options.

Pelletron Corp.
Lancaster, PA 17605 0142
Jul 08, 2003 Model P5 dust contaminant removal system cleans regrind and virgin materials that have been mixed together. Agitator controls material flow, and flux field generator produces low-power electromagnetic field, disrupting electrostatic bond between pellet and dust particles. With capacity of 500 lb/hr, Model P5 removes dust particles down to 100 microns. By separating plastic pellets from dust contaminants, manufacturers can reduce scrap rates and improve product quality.

Sanborn Technologies
Medway, MA 02053
May 30, 2003 Freddy TOS removes oil from water in applications ranging from machine tool sumps to parts washing systems to wastewater. Running continuously while equipment is in operation, portable unit can be moved from one location to another. Filter cartridge can be removed and cleaned, and diaphragm pump provides low shear on oil for separation at flow rates up to 1.5 gpm. Available in 2 models, unit may be electronically driven or air operated.

Algae-X International
Ft. Meyers Beach, FL 33932
Apr 25, 2003 Self-contained FPS-500 allows fuel to be periodically re-circulated to remove water, sludge, and inorganic debris as well as eliminate microbial contamination. Components include Separ Fuel/Water Separator and Filter, 6 hr manual timer, fuel pressure gauge, and continuous-duty gear pump. Unit improves and maintains quality of diesel fuel, hydraulic oil, and other distillate fuels for improvement in filtration, combustion, and fuel stability.

Yasda Precision America Corporation
Elk Grove Village, IL 60007
Sep 23, 2002 Oil Pure MS-BZ features Quick Suction Pot System (Q Pot) that collects floating substances through automatic surface suction, regardless of turbulence of fluid. It requires no liquid-level adjustment after installation. Pump uses bellows-type design to separate floating substances smoothly, without further agitation. Adjustable surface levels allow users to change settings to separate fluids of different weights and viscosities.

Hayward Industrial Products, Inc.
Elizabeth, NJ 07207
Sep 16, 2002 Series CLC Coalescers/Separators have 2-stage design that allows them to remove 99% of all liquid and solid particulate matter larger than 4 microns from air and gas streams. Units have no moving parts to fail or wear out. Applications include compressed refrigeration gases, evaporator overhead steam, high pressure gas at injection wells, fuel gas lines to engines in power and industrial plants, and regulator stations.

Redi/Controls, Inc.
Greenwood, IN 46143 1406
Sep 16, 2002 OAM Purgerâ„¢ removes Oil, Acid, and Moisture from centrifugal chiller's refrigerant charge. Oil is automatically returned to chiller's oil sump. Since purger works continuously, refrigerant is permanently maintained in virtual oil-free state. OAM Purger operates independently of and has no effect on chiller operation. Installation consists of ¼ in. OD copper line connections and 120 V power supply.

Mayfran International
Cleveland, OH 44143-0038
Jun 19, 2002 ConSep 2000® II combination, single-platform chip conveyor/coolant separator removes chips and contaminates to 50 micron level. Features include self-cleaning backwash filter system, and cleaner for particulate removal to 10-15 nominal micron level. FastPacâ„¢ Briquetter processes 110 to 6,614 lbs of metal chips per hour (depending on model) and transforms material into dense, dry briquettes. Coolant recovery removes up to 98% of residual coolant and cutting oils.