Solid & Liquid Separators

Chemical Processing & Waste Management, Mining, Oil Drilling & Refining

Linde to Highlight Equipment and Services Proven to Enhance Oil Exploration, Production and Distribution at URTeC Meeting in Texas

July 27, 2016

BRIDGEWATER, N.J. - Linde's broad range of services designed to enhance oil and gas exploration, production and distribution will be the main topics Linde experts will discuss at this year's Unconventional Resources Technology Conference (URTeC). The meeting will be held at the Henry B. Gonzalez Convention Center in San Antonio, Texas, August 1-3. Linde LLC's Oil Gas Services... Read More

Chemical Processing & Waste Management

Efficiently Separating Algae at a Water Treatment Plant

July 26, 2016

Seeking a more efficient algae removal process from backwash water, a water supplier contacted Russell Finex, global sieving and filtration specialists.  Following a consultation and on-site trial, it was determined that the Liquid Solid Separator™ was the most appropriate machine for the application. Screening at 100 micron, the Liquid Solid Separators are put into action when algae... Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Dimminutor®

May 25, 2016

The Dimminutor provides effective, automatic screening and grinding of wastewater solids in straight through channels and wet wells. This powerful unit reduces plastics, wood, rags and other solids to fine bits, enhancing plant operation and improving the reliability of pumps and other downstream equipment. The Dimminutor employs a smooth, continuously rotating design with high torque.  As... Read More

Chemical Processing & Waste Management

Eddy Current Separator recovers non-ferrous fines.

May 10, 2016

Without sensor-based or optical sorting equipment, Eriez® Ultra High-Frequency Eddy Current Separator recovers aluminum, copper, and other non-ferrous fines from automobile shredder residue. System's rotor, available in 1.0 or 1.2 m wide, combines ability to produce high gauss at belt's surface with large number of magnetic poles operating at high RPMs to create ultra-high-frequency changes. Combination results in separation of bare copper wire and other valuable metals as small as 2–3 mm. Read More

Chemical Processing & Waste Management, Material Handling & Storage, Sensors, Monitors & Transducers

Metal Detectors, Separators protect against metal contamination.

March 1, 2016

Eriez® Rare Earth magnetic separator, powered by Xtreme® RE7, and Xtreme® Metal Detector Enhanced Platform (EP) enable processors to achieve maximum product purity in food and sanitary industry applications. Recommended for harsh applications, metal detector  can ignore signals generated by products that cause false positives. Products, by working in conjunction, remove ferrous contamination and detect any missed ferrous material as well as nonferrous metals. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Waste Handling Equipment

AFL Industries' Specialty Wastewater Treatment Product Line Upgraded

February 2, 2016

AFL Oil Stop Valves To Be Showcased at EUEC Conference RIVIERA BEACH, FL — Since its acquisition of AFL Industries (www.aflindustries.com), RGF Environmental Group, Inc. has significantly grown the global footprint and brand for this manufacturer of high-quality, prefabricated oil/water separators, oil stop valves and other specialty wastewater... Read More

Chemical Processing & Waste Management

3Nine Oil Mist Separators at IMTS 2016 in Chicago

January 20, 2016

Be sure to visit us in booth NC-457 to learn more about our company and family of oil mist separators. The trade show takes place September 12-17 2016 at the McCormick Place, Chicago. For more info about the trade show, please visit IMTS. We hope to see you there!... Read More

Chemical Processing & Waste Management, Material Handling & Storage, Waste Handling Equipment, Green & Clean

Material Recovery Station separates liquids from solids.

July 27, 2015

With screening panel set inside leak-proof, bulk plastic container, Model MRS-30 automatically screens out and captures solid particles while allowing liquids to safely pass through and accumulate in container bottom. When filled to its 30-gal capacity, self-contained unit may be drained to allow liquids to be reprocessed and reused on-site while solids may be sold as highly marketable scrap. Recycling system is forkliftable without pallet and stands on 44 x 44 in. footprint. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment

A Workhorse of a Machine

July 15, 2015

CFR's portable Pro-500 upright extractors equip carpet cleaning professionals with all of the tools needed to achieve contractor-grade, deep cleaning results. A workhorse of a machine designed to meet multiple cleaning demands, the Pro-500 upright extractor provides superior flexibility, portability, and tackles virtually any cleaning task including restorative carpet care, stairs,... Read More

Chemical Processing & Waste Management, Waste Handling Equipment

Nonferrous Separator produces premium, high-grade zorba.

June 4, 2015

Combining 3 eddy current separators, Rougher/Cleaner/Scavenger System is positioned downstream of ferrous separation and trommel screen to size material. Rougher aggressively maximizes recovery of nonferrous metals, while Scavenger recovers any zorba misplaced by Rougher. Cleaner then removes unwanted material from final zorba product. Downstream of RCS system, sensor sorting equipment may be used to separate stainless and lead. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Portable Water Extractor uses dual 3-stage vacuums.

May 11, 2015

Able to extract flood water from carpet and most any water-damaged facility, Flood King has top-mounted, dual 3-stage vacuums that allow unrestricted airflow and use just 13 A of power, which is especially suitable for flooded sites where power may be limited. Two diaphragm bilge pumps automatically remove waste water from 9-gallon recovery tank through standard ¾ in. garden hose at 10.5 gpm, eliminating need to stop and empty tank. Read More

Chemical Processing & Waste Management

Filtration Membranes effectively separate oil from water.

May 6, 2015

Offered as pre-cut test coupons, sheets, and disks, Synder Filtration PX, PY, and PZ Polyacrylonotrile (PAN) ultrafiltration membranes are designed for oil removal in wastewater treatment applications and can fill process requirements where presence of oils in industrial effluent hinder downstream processes. These hydrophilic membranes feature molecular weight cut-offs (MWCOs) of 400 kDa (PX), 100 kDa (PY), and 30 kDa (PZ). Custom sizes are also available. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment

CFR Pro 500 with Perfect Heat Technology

February 6, 2015

The Pro 500 portable extractor from CFR is the industry's top machine for improving worker productivity. The Pro has CFR's famous recycling technology, reducing dump and refill downtime. The solution lasts and remains effective up to seven times longer, which allows workers to finish every job faster. The advanced Perfect Heat™ system requires no additional electrical cords and... Read More

Chemical Processing & Waste Management, HVAC

Dust and Fine Removal System optimizes molding process.

January 5, 2015

Using patented, rotating tumbling process, sometimes with vacuum assist, Model 0308 DFS System removes dust, powders, and fines from regrind or virgin material at approximately 25 lb/hr. System was created for limited space environments and can be mounted press-side to current granulator system. Full accessibility with tilt-back cover facilitates servicing and cleaning. Read More

Chemical Processing & Waste Management, Green & Clean

Module Treatment System recovers oil from waste.

December 15, 2014

Comprising pumping module with emulsifier dosing unit, heating and separation modules, and control unit, PureDry separates waste oil into 3 phases: cleaned oil, super-dry solids disposable as dry waste, and water clean enough to be sent to bilge system. Simplicity of separator design ensures reliable operation, and automation adapts process control to varying feed conditions. There is no water consumption, and no additional waste is generated. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC, Services, Transportation Industry Products

Vortox Air Technology Produces Superior Air Filtration Solutions

October 22, 2014

Among Vortox's Strengths Are Its Custom Production, On-Site Engineering, Deep Draw Capabilities, and Customer Collaboration Claremont, CA—Vortox Air Technology, Inc., an American manufacturer of innovative solutions to air filtration needs for many industries, offers a wide variety of products, accessories, and services. Vortox excels at producing custom, high-quality, diverse... Read More

Chemical Processing & Waste Management

Circular Vibratory Separators Increase Production Rates of Zinc Oxide Granules at Umicore

August 13, 2014

Umicore increases production capacity and improve the quality of zinc oxide granules by replacing an existing centrifugal sieve with the Russell Finex Separator™. Umicore, a global materials technology group, have a history that dates back more than 200 years. The merging of different mining and smelting companies has made the Umicore Group as we know today, an expert in materials science,... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC

PneumaticPlus Air Preparation and Cleaning Equipment

August 5, 2014

PneumaticPlus air preparation & cleaning equipment provides clean, dry air necessary to achieve the optimal performance for your pneumatic system. Our innovative technology allows the separation of impurities such as moisture, oil, and other foreign particles from compressed air. We offer many variations and sizes to accommodate any application. PneumaticPlus offers a complete line consisting... Read More

Chemical Processing & Waste Management

Pre-Separator operates with 3-5 hp systems.

July 25, 2014

By capturing over 99% of waste before it reaches single-stage dust collector, Super Dust Deputy XL eliminates filter clogging, frequent bag changing, and loss of airflow. Made of static conductive plastic, pre-separator turns old inefficient single-stage dust collectors into super cyclonic collectors. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment

Take Your Calculator to the ISSA Tradeshow

July 9, 2014

The ECO-500, on display at the upcoming ISSA tradeshow in Orlando, filters and recycles cleaning solution up to seven times, making it one of the Greenest extractors available. But what does this mean for carpet cleaning technicians? Quite a lot. According to ISSA's 540 Cleaning Times, a conventional extractor requires 21 water/solution dump/refills to clean 5,000 square feet. The ECO-500... Read More