Eriez Magnetics    Erie, PA 16514
Sep 29, 2011 Used in vacuum and pressure pipelines, PN Metal Separators remove metal contaminants from pneumatically conveyed materials, plastic pellets, and regrind. Contaminants, even those encapsulated in pellets, are removed via reject mechanism that operates reliably at conveying speeds to ~4,000 fpm without interrupting flow. Modular design enables flexible adaptation to different conveying methods, and options are available to accommodate high temperature, abrasive, and powdery bulk materials.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Aug 19, 2011 Incorporating vertically mounted motor that induces sifting motion across screen plate, LA Low Profile Separator is suitable for sifting flours and starches. Frame is mounted on rubber isolators rather than springs used in conventional separators. Horizontal, high G motion maximizes capacity of undersize product passing through screen while allowing oversize material to exit separator. Featuring sanitary construction, separator meets needs of food/beverage and pharmaceutical industries.

Eriez Magnetics    Erie, PA 16514
Jul 12, 2011 Using ballistics to separate iron-rich ferrous from mixed metals and waste material in post drum magnet flow, Shred1(TM) Separator delivers 3 distinct fractions. Fraction 1, representing 60-80% of flow, contains less than .2% copper and does not require picking. Fraction 2 represents 20-30% of flow and contains mostly mixed metals, copper, and aluminum with steel housings or cores. Containing 5-7% of flow, Fraction 3 consists of heavy steel objects and light material, such as fluff and rubber.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Jul 12, 2011 Available in 48 and 60 in. diameters with 5 hp motor, Super MX Separator delivers forces as high as 10 G and is suited for separating solids from liquids or segregating dry materials into various sizes. Machine utilizes conical construction rather than flat plates, which creates rigid geometric structure. Totally enclosed weight guard prevents reach-in injuries, while open base design allows for cleaning underneath unit, preventing dirt and product build-up.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Jun 21, 2011 Supplied in open-manifold or Packed-Vessel configuration, SWECO® Hydrocyclone System provides fine particle separation for wet processing. Manifolds utilize 2, 4, 5, or 10 in. diameter cyclones while Packed Vessels contain either 1 or 2 in. diameter cyclones. Both configurations can process feed rates from 10-3,000 gpm, depending on size and number of hydrocyclones installed in system. Reliable operation only requires consistent feed at steady pressure.

Nilfisk Industrial Vacuums    Morgantown, PA 19543
May 31, 2011 Placed upstream from Nilfisk CFM-brand vacuum, Nilfisk CFM Immersion Separator safely traps and retains dangerous Group E dust particles in neutralizing fluid bath. Unit is constructed of low-sparking materials and grounded components with grounding strap for added safety. Separator includes drain valve, antistatic wheels, and sight level tube to monitor liquid levels. Coalescent filters prevent passage of fluid droplets that have been agitated by working air from passing back to vacuum.

Russell Finex    Pineville, NC 28134
May 09, 2011 Designed for use on Compact sieves, 316L stainless steel magnetic separator helps ensure food and pharmaceuticals remain free from ferrous contaminants. Particles are attracted to and securely held on bars which can be wiped clean between batches. Number and placement of bars promote balanced coverage of open space and magnetic field strength without restricting throughput. Ferrite model achieves 4,500 Gauss, while rare earth options reach up to 14,500 Gauss.

Eriez Magnetics    Erie, PA 16514
Mar 31, 2011 Installed directly above material feed throat of extruder, injection molding or blow molding machine, Model CF removes both magnetic and non-magnetic metal contaminants from slow, downward moving column of material. Separator features automatic self-calibration and monitoring as well as adjustable scanning sensitivity and reject duration. Available in 4 pipe sizes from 2.9-5.9 in. diameter, separator discharges contamination into reject container with air-powered separating slide.

Kason Corporation    Millburn, NJ 07041
Mar 15, 2011 Vibroscreen® High Capacity, Two-Deck Classifier features 100 in. dia and classifies various bulk materials ranging from dry bulk solids to solids-laden slurries. Unit includes 2 horizontal screens in vertical, cylindrical housing, while clamps between screen frames enable interior access for inspection, screen changes, and wash down. Imbalanced weight gyratory motor affixed to housing generates vibration. Constructed of epoxy-coated carbon steel, unit can operate on batch or continuous basis.

Eriez Magnetics    Erie, PA 16514
May 25, 2010 Performing nonferrous particle separation from PET flake, Eddy Current Separators optimize purity and yield for recycling of beverage containers made from polyethylene terephthalate (PET). Recyclers can obtain single-pass aluminum reduction up to 92% and achieve clean PET yield of 97-99% percent. Systems use rare earth magnets arranged into composite shelled rotor that has 22 poles and is balanced to operate up to 3,200 rpm. Normal bearing life is calculated to exceed 15 years.

Munson Machinery Co., Inc.    Utica, NY 13503
May 17, 2010 Intended for applications where solids must be removed from slurries in high volumes, self-cleaning model 24RDS24 contains 24 in. dia x 24 in. long rotating cylinder constructed of wedgewire screen. Doctor blade scrapes sludge and debris collected on outside of cylinder, while an internal spray line dislodges particles blinding screen. Variable-speed unit is equipped with wedgewire screen in 7 orifice sizes from .010-.100 in., offering respective capacities from 200-930 gpm.

Eriez Magnetics    Erie, PA 16514
May 12, 2010 Able to last indefinitely, P-REX delivers optimal separation capabilities for scrap recycling operations and uses no electricity. Permanent magnet extends to edge of drum for optimized separation efficiency, and there is no decline in performance due to heat rise. Also, there is no transfer/flip point drop in magnetic force; ferrous material is transferred and flipped between magnetic poles to promote cleaner product and optimized recovery.

Eriez Magnetics    Erie, PA 16514
Apr 20, 2010 Promoting metal reuse and energy conservation, ProSort II uses metal sensors aligned with electromagnetically driven paddles to separate valuable metals from waste. Inverted paddle design enhances detection of larger and smaller metallics and even some wire, while motorized paddle is adjustable - up/down, forward/backward, angle up/down - to optimize separation efficiency. System comes in modular design in units up to 90 in. wide.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Mar 31, 2010 Available in 2 x 4 ft and 3 x 4 ft sizes, Fusion(TM) Rectangular Screen promotes efficient conveyance of solids via its cellular construction that utilizes cage design reinforced with high-tensile-strength steel rods. Robotic construction creates repeatable tensioning, promoting consistency from screen to screen. Designed to eliminate use of adhesive, epoxy, or silicone in screen manufacturing, mesh is fused directly into disposable polymer constructed frame.

Bunting Magnetics Company    Newton, KS 67114 0468
Feb 10, 2010 Structured to hold ferrous debris against solid tapered step, Tapered-Step Magnetic Liquid Traps prevent wipe-off of tramp iron and fines, even in high-density applications with volumes up to 180 gpm. Units are equipped with Neodymium magnets capable of handling 300°F high-temperature load. Available in single- and dual-plate styles, traps come in 2 in. size rated to 250 psi as well as 3 and 4 in. sizes that handle up to 200 psi.

Phymetrix Inc    Medford, NY 11763
Jan 05, 2010 Mini-Demister liquid-gas separator enables portable gas analyzers to remove liquid vapor that could damage sensitive analyzer components. Unit allows liquids to settle to bottom under force of gravity, where they drain out through adjustable metering valve. Sample then travels through glass container tube, rated for 150 psi, that provides operator with 360° view of accumulated liquid. Device has axial in-line construction/SS housing and measures 3.65 in. high with 1 in. dia.

Prab Conveyors    Kalamazoo, MI 49003
Jul 20, 2009 Designed for small to medium machining shops and as add-on for larger operations, modular MiniSystem(TM) can reclaim cutting oil and coolants. Unit is fully portable and can be contained in area as small as 4 x 11 x 8 ft. Continuous processing, diagonal shaft wringer comes with bar-end separator and exerts 700 G's of force to extract up to 98% of cutting fluids. Dry chips are produced at rates up to 1,000 lb/hr. Options include feed dumper system, shredder, and 10 micron filter.

Magnetic Products, Inc.    Highland, MI 48357
Jul 14, 2009 Using high-power neodymium Rare Earth magnets, high-intensity magnetic filter Micromag(TM) remove ferrous and para-magnetic contamination from fluids. Eco-friendly product does not use any filter consumables, while removed contamination can be recycled. Filter is suited for use with machine tool oils, coolants, and hydraulic fluid machinery systems.

Nilfisk Industrial Vacuums    Morgantown, PA 19543
May 19, 2009 When used in conjunction with industrial vacuum cleaners, Nilfisk CFM Hopper Separators can help plant managers increase collection capacity, separate ingredients for re-use, or account for collected materials. Each unit can be equipped with self-cleaning cartridge filtration for large or heavier particles and has 3 options for disposal of collected debris. Various discharge valves and operation controls are available, such as electro-pneumatic reverse purge filter-cleaning system.

Munson Machinery Co., Inc.    Utica, NY 13503
Sep 03, 2008 With few moving parts, self-cleaning Rotary Drum Screen contains rotating cylinder which is constructed of wedge wire screen with stationary doctor blade on outside of cylinder and internal spray line. Models are available with drums of 24 in. dia in 24, 36, 48, 50, and 72 in. lengths, and with drums of 36 in. dia in 96 and 120 in. lengths. With 200-1,000 gpm capacities, unit is intended for sewage treatment, pulp and paper, rendering, and pelletizing applications.