Advanced Drainage Systems, Inc.
Hilliard, OH 43026
Aug 28, 2006 Incorporating HDPE body and weir plates, Grease Interceptor removes grease from kitchen waste streams before they enter sanitary sewer lines. Watertight sanitary joints are achieved through bell-and-spigot couplers that prevent waste infiltration. With operating pH range of 1.5-14, interceptor is unaffected by strong acids and alkalis. Lightweight, gravity-flow unit is available in capacities of 750, 1,000, and 1,500 gal, and has 8 in. inlet and outlet tees.

Eriez Magnetics
Erie, PA 16514
Aug 25, 2006 Rare Earth Permanent Sight Glass Magnets remove tramp metal contamination from plastic resin and pellets as it passes through site glass loader on its way to molding machine. Featuring continuously welded construction, magnets are available in 4 sizes to fit most site glass loaders. Users can choose between 1 in. or 5/8 in. dia.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Aug 11, 2006 Featuring stainless steel tank enclosure and hopper, SPIRALIFT SC8500 takes screenings discharged from bar screen and washes, grinds, compacts, de-waters, and discharges them into container for disposal. It utilizes 2 hp auger as well as 5 hp grinder with 8 x 20 in. opening and cutter cartridge technology, which replaces individual cutters and spacers with one-piece cartridges. PLC-based control system monitors and integrates entire system.

Solberg Manufacturing, Inc.
Itasca, IL 60143
Jul 18, 2006 Available in standardized and customized versions, Vacuum Assisted Oil Mist Eliminator (VAE) consists of vacuum-rated housing, blower system, and coalescing filter element. Vacuum is created by regenerative blower or centrifugal fan. Also available is static oil mist eliminator consisting of filter housing, coalescing element, and drain mechanism. Vacuum control method on VAE can vary from manual bleed filter and valve to automatic, variable frequency drive.

Bunting Magnetics Company
Newton, KS 67114 0468
Jul 10, 2006 Designed for plastics industry applications with limited headroom, low-profile Machine-Mounted Separators (MMS) detect and reject all types of conductive metal contaminants down to 0.5 mm. They incorporate pneumatically driven slide gate combined with venturi-driven vacuum rejection mechanism. Installed at infeed of extrusion, injection, and blow molding machines, these triple-coil metal detectors suit choke feed applications on gravity systems.

JWC Environmental
Costa Mesa, CA 92626
Jul 05, 2006 Auger Monster® XD systems remove and clean flows and solids loading levels in small to medium institutions. Along with 40 in. tall cutter stacks utilizing Macho Monster technology, products feature 10 hp motor on cutting chamber's 2 shafts of 7½ in. cutters to handle large and difficult solids. Single- and double-drum models feature mechanical seals with hex driven design, and operator interface controllers allow on-the-fly changes.

Rotex, Inc.
Cincinnati, OH 45223 1845
May 18, 2006 Featuring side access doors that facilitate screen cleaning and changes, APEX(TM) produces uses gyratory-reciprocating motion with no vertical motion to keep material in constant contact with screen surface. Ergonomic unit can be maintained by one person and uses 5 lb APEX screens that range in size from ½ in. to 325 mesh. Suited for dry separation screening, product has top cover inspection ports that allow for seal inspection from outside of machine.

Sanborn Technologies, North American Filtration of Massachusetts, Inc.
Walpole, MA 02081
May 12, 2006 Turbo-Separator T14RCS features processing rate of up to 40 gpm with solids removal capacity of up to 22 lb before changing liner. Low profile dirty and clean tank receives fluids via gravity directly from machine tool. Offering overflow protection, clean tank includes heat exchanger and supply pump for return of cleaned fluid directly to nozzles in grinder. Discharged dry solids can provide resource recovery for valuable materials, such as carbide.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Feb 07, 2006 ScreenMaster® ST, constructed of stainless steel, comes in various widths, heights, and screen openings to promote optimal degree of solids separation to meet application requirements. As solids accumulate into mat on screen, level sensor is activated, and unit is energized. Motor reciprocates bars, incrementally moving material up bar screen steps. When they reach top, solids fall off into bin, washer, or conveyor, and unit automatically stops in home position.

Bunting Magnetics Co.
Newton, KS 67114
Feb 02, 2006 Featuring neodymium magnets, NEO FF Series Drawer Magnet captures and holds small ferrous metal particles. EPDM drawer gasket resists heat aging and magnetic latch keeps No-Spill(TM) Slide Gate open under high vibration conditions. Mountable at injector throat and locked in place by high-torque nylon knobs, unit features SS housing and center drawer guide that facilitates easy removal and reinstallation of magnet drawer.

Power + Energy, Inc.
Ivyland, PA 18974
Feb 01, 2006 Based on palladium alloy membranes, commercial hydrogen separators are able to tolerate and remove sulfur from reformed fuel streams. Separators are designed to be coupled with fuel reformers, including methanol, ethanol, natural gas, propane, ammonia, gasoline, and diesel fuels. Membranes also provide capability to separate hydrogen from alternative fuels such as land-fill gases, synthesis gases, and biomass digesters.

Rotex, Inc.
Cincinnati, OH 45223 1845
Jan 17, 2006 Measuring 10 x 10 x 12 ft, MEGATEX(TM) Screener provides 100-350 ft² of screen surface and evenly splits and distributes incoming flow of material to multiple, stacked 5 x 7 in. screen decks. Optional aspiration doors remove troublesome chaff that can contaminate surrounding environment and clog other pieces of equipment during load-out process. Doors can be built into new machine or provided as retrofit upgrade.

Tecan
Rancho Santa Margarita, CA 92688
Jan 13, 2006 Made via Photo ElectroForming (PEF) process, single-layer sieves and meshes ensure no sieved material is trapped during sieving, filtering, or grading. Meshes can be produced with aperture shapes and sizes relevant to application-specific particles, with aperture tolerances from ±2 microns. While offering consistent cross-sectional thickness, design can incorporate solid portions such as lateral supports. Products are supplied as flat sheets, flexible membranes, or 3D forms.

Rotex, Inc.
Cincinnati, OH 45223 1845
Nov 17, 2005 Designed to minimize blinding and bridging when screening difficult or sticky materials, Ultrasonex(TM) screens through meshes as fine as 20 µm. Transducer probe applies ultrasonic vibration directly to screening mesh in addition to vibratory motion of screener. Fully detachable probe incorporates titanium core for non-wear on contact surfaces. Featuring touch panel controls, Ultrasonex is available on new screeners and can be field retrofitted to existing screeners.

Rotex, Inc.
Cincinnati, OH 45223 1845
Nov 11, 2005 Designed to maximize product recoveries at material temperatures up to 400°F, Minerals Separator(TM) features screen deck slope of 6° to meet glass, filter, and frac sand specifications. Elliptical-linear motion equally distributes materials to all screen decks, ensures uniform bed-depth across screen surface, and provides aggressive blinding control. Lift-Rail(TM) system with non-binding stainless steel cam activation facilitates screen frame installation and removal.

AGM Container Controls, Inc.
Tucson, AZ 85716
Nov 09, 2005 Offering single connection purging with automatic operation, portable, self-contained NEPS 1000 Advantage delivers efficient use of nitrogen, with minimized consumption, by measuring dryness of purge gas as it leaves system being dried. Suitable for pipeline and continuous dryers, as well as containers and enclosures, user-programmable unit features choice of 3 pressure cycles. Pressure readout and dewpoint monitor enable gas dryness to be checked before purging.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Nov 02, 2005 SPIRALIFT SC adds benefits of in-channel auger screening system to existing mechanical bar screen installation. Bar screen automatically removes solids from liquid channel and deposits them by gravity into SPIRALIFT SC hopper. Solids are reduced to small size by TASKMASTER® grinder, and are then washed to remove contaminants and organics, compacted, and conveyed from system by shaftless screw unit. SPIRALIFT SC unit is freestanding and includes PLC-based control system.

Tema
Cincinnati, OH 45249
Nov 01, 2005 Conturbex Worm Screen Centrifuge features 100 µm or larger screen to remove up to 50% of remaining free moisture from crystalline material. Process works by screw feeding belt filter cake into center of continuously operating centrifuge. Centrifuge spins cake at up to 1,200 g, driving free moisture through screen and continuously discharging solids to dryer with lower moisture.

Parker Hannifin Corp., Tube Fittings Div.
Columbus, OH 43228 9698
Oct 28, 2005 Offering nominal ratings from 65-480 microns, Protective Screen Fittings are available in sizes -4 through -12 for use with Triple-Lok® 37° flare and Seal-Lok(TM) O-ring face seal fittings. Constructed with stainless steel screen elements, -4 size features basket-style screen, while remaining sizes are dome style. Screen fittings are suited for gauge and instrumentation protection, as well as shielding of critical hydraulic components.

Kason Corporation
Millburn, NJ 07041
Oct 25, 2005 Configured for installation on mezzanine, Low Profile Centri-Sifter(TM) removes oversize contaminants, de-lumps manually dumped bulk materials, and gravity-discharges into process equipment. Centrifugal action created by rotating helical paddles accelerates rate at which particles pass through horizontal screen cylinder while de-lumping soft agglomerates. Bag Dump Screener is stainless steel and finished to industrial, food, 3-A dairy, and pharmaceutical standards.