Eriez Magnetics    Erie, PA 16514
May 17, 2012 Offering edge-to-edge separation, electro-permanent EP-Rex(TM) Scrap Drum handles sphere-shaped ferrous (meatballs or knuckles) and delivers degree of strength that benefits scrap recycling operations. There is no transfer point drop in magnetic force, nor is there any decline in performance due to heat rise.

Eriez Magnetics    Erie, PA 16514
May 14, 2012 Available in single-, double-, and triple-stage versions with non-magnetic or magnetic-rerun, Eriez® Rare Earth Roll Separators feature rolls constructed with neodymium-boron-iron rare earth permanent magnets. High gradient magnetic circuit includes proprietary items designed to produce magnetic field in excess of 21,000 gauss. Capable of recovering weakly magnetic particles and handling feeds from ½ in. to very fine materials, rolls come in 3, 4, and 6 in. dia and widths from 5-60 in.

Kason Corporation    Millburn, NJ 07041
May 10, 2012 Constructed of stainless steel with continuous weld seams and material contact surfaces polished to sanitary finish, Vibroscreen® Model K30-1-SS features gap-free screen frames with quick-disconnect clamps. This 30 in. screener also features flexible quick-action connectors at inlet and outlet, clamshell lid, and removable, sanitary magnet at discharge spout. Screens are mounted to support rings using FDA-approved epoxy and sealed using FDA-approved gasket material.

Russell Finex    Pineville, NC 28134
May 03, 2012 Available in 5 sizes from 10 in. lab unit up to 60 in. production scale unit, Russell Compact Sieves are used for safety screening of powders and liquid slurries. Design promotes transmission of vibration to mesh screen surface, while quick release toggle clamps facilitate disassembly and cleaning. Mounted on rubber suspension system, low-profile vibratory screeners operate at less than 70 dBA typ and can achieve throughput rates up to 60,000 kg/hr.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Apr 10, 2012 Available with MAGnanoSHIELD®-coated tubes, RotoDrawer(TM) rids ferrous metal from powder and bulk processed products that have difficult flow characteristics and tendency to bridge/choke when using stationary, tube style magnets. FDA-compliant antimicrobial coating from General Magnaplate offers 99.9999% microbe resistance to bacteria and fungus. Motorized, cylindrical configuration of Rare Earth magnetic tubes continually rotate through gravity fed product stream.

Huntingdon Fusion Techniques-USA Inc.    Melbourne, FL 32936-1175
Apr 04, 2012 Available in 9 models covering internal diameters from 20-305 mm, PurgElite® Weld Purging Systems are equipped with low-profile purge gas release valve that purges chamber between 2 dams once they are inflated. Valve eliminates bust bladder problems as well as protruding metal parts that scratch insides of electro-polished tubes and pipes. Systems additionally include glow strip positioning band and synthetic gas hose that withstands temperatures up to 1,300°F.

Supercritical Fluid Technologies, Inc.    Newark, DE 19711
Feb 23, 2012 Designed to perform extractions in supercritical fluid media, SFT-150 Supercritical Fluid Extractor can be applied to variety of natural substances in order to obtain pure fragrance extracts for perfumes and shampoos. High-resolution variable restrictor valve provides control over flow rates, and air-driven pump produces pressures required for supercritical fluid work. Flow rates up to 250 g/min of liquid CO2 may be selected, and modular design is configurable and adaptable to application needs.

JWC Environmental    Costa Mesa, CA 92626
Feb 16, 2012 Attached to wall of pump station next to inlet pipeline, 90° Auger Monster® AGV screens, cleans, and conveys rags and debris up and out of sewer system. Screening basket with ¼ in. circular openings stops debris, even small trash such as cigarette butts, while rotating auger lifts it to ground level. Compaction zone compresses and dewaters material before depositing it into plastic bag or bin ready for landfill disposal. Custom-built for each site, system can screen up to 1 million gal/day.

Cleveland Vibrator Co., The    Cleveland, OH 44113
Dec 27, 2011 Offering choice of optional electromagnetic jogger table or standard dual outboard rotary electric drives, HK Laboratory/Pilot Sieve Towers feature vibratory design that enables sieve analysis of product samples. Towers accommodate up to 8 full height sieves or set of 16 half frame sieves for dry or liquid slurry materials. Units are available in 8, 12, or 17 in. diameter sieve sizes down to 20 micron. With ultrasonic vibration upgrade, devices support mesh sizes down to 10 micron.

Green Turtle    Charlotte, NC 28217
Nov 10, 2011 Used in fats, oils, and grease (FOG) management, Proceptor®PDI engineered gravity grease interceptor features flow design and tank shape that promote regulatory compliance. Solution is available as hydro mechanical grease interceptor certified by Plumbing and Drainage Institute to 100 gpm and grease holding capacity of 200 lb. Able to serve several sinks, dishwashers, floor drains, and food disposal devices, system installs above ground, in kitchen/basement, in floor, or outside.

Kason Corporation    Millburn, NJ 07041
Nov 09, 2011 Centri-Sifter® model YOB-SS features cantilevered shaft with 2 externally mounted bearings between screening chamber and motor drive, allowing all components to slide freely from shaft end for accelerated cleaning, screen changes, and inspection. System comes in configurations for gravity-fed applications or continuous operation in-line with dilute-phase pneumatic conveying systems, with screen cylinders of Nylon monofilament, woven wire, perforated plate or wedgewire screen.

Kason Corporation    Millburn, NJ 07041
Sep 20, 2011 Vibroscreen® K72-1K-SS (72 in.) discharges oversize particles 360° around periphery of External Kascade circular screening deck instead of through conventional discharge spouts. As material is fed onto center of screening deck, on-size particles pass through screen and funnel to lower discharge chute, while oversize particles flow outward in spiral pattern into high capacity discharge spout. Applications include removal of fines from products such as plastic pellets, cereal, pet food, etc.

Celeros Separations    Foxborough, MA 02035
Sep 08, 2011 Employing tubular bowl with working volume of 40 L, Model APD-250 is capable of generating up to 20,000 x G of separating force and processing bioreactor harvests up to 10,000 L in single shift. Large-scale production centrifuge utilizes Automatic Piston Discharge system to completely transfer separated solids from bowl without operator intervention or excessive loss of centrate.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Aug 19, 2011 Incorporating vertically mounted motor that induces sifting motion across screen plate, LA Low Profile Separator is suitable for sifting flours and starches. Frame is mounted on rubber isolators rather than springs used in conventional separators. Horizontal, high G motion maximizes capacity of undersize product passing through screen while allowing oversize material to exit separator. Featuring sanitary construction, separator meets needs of food/beverage and pharmaceutical industries.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jul 26, 2011 Designed for use with abrasive products in pneumatic transfer applications, magnetic separation solution has housing comprised of 2 door-mounted magnetic plates positioned on opposing sides of stainless steel tube matching existing diameter of processing line. This design maintains existing flow rate, eliminating wear points within magnetic housing. Dual-magnet design reaches through entire product stream and captures metal contaminants from flow.

Kason Corporation    Millburn, NJ 07041
Jul 19, 2011 Intended for food, dairy, pharmaceutical, and chemical applications, Centri-Sifter® features 3-bearing shaft that cantilevers for removal of internal components. External roller bearings located at motor end of shaft and on hinged cover at discharge end provide maximum support and vibration-free operation under heavy loads. Equipped with Clean-In-Place Spray Balls for rapid sanitizing using steam or cleaning solution, stainless steel unit is finished to industrial, 3-A, FDA, and BISSC standards.

Eriez Magnetics    Erie, PA 16514
Jul 12, 2011 Using ballistics to separate iron-rich ferrous from mixed metals and waste material in post drum magnet flow, Shred1(TM) Separator delivers 3 distinct fractions. Fraction 1, representing 60-80% of flow, contains less than .2% copper and does not require picking. Fraction 2 represents 20-30% of flow and contains mostly mixed metals, copper, and aluminum with steel housings or cores. Containing 5-7% of flow, Fraction 3 consists of heavy steel objects and light material, such as fluff and rubber.

Magnetic Products, Inc.    Highland, MI 48357
Jun 09, 2011 Utilizing neodymium Rare Earth magnets, Eco-Mag(TM) removes ferrous and para-magnetic contamination from fluids and is particularly effective with machine tool oils, coolants, and hydraulic fluid machinery systems. Eco-Mag does not use consumables, and removed contamination can be recycled, eliminating disposal costs.

Supercritical Fluid Technologies, Inc.    Newark, DE 19711
May 10, 2011 Able to perform supercritical fluid extractions in single or dual 10 L sample vessels with single or dual separators, SFT-NPX-10 pilot scale supercritical extractor facilitates transition from laboratory scale equipment to production processing systems. Coriolis mass flow meter delivers mass flow measurement precision, and pneumatic CO2 pump with waterless pre-chiller maximizes pumping efficiency. Optional RIO programmable automation controller upgrade is available.

Palmer Manufacturing & Supply, Inc.    Springfield, OH 45504
May 10, 2011 Using blower and heavy-duty steel fluid bed, UHT-Series cools sand from over 1,000°F to as low as 120°F at rates up to 40 tons/hr. Temperature of incoming sand is monitored, and necessary amount of properly tempered water is metered into linear stainless steel cooling bundle to meet discharge set point. In addition to Ethernet-enabled, PLC-based control system, features include 2 dust collection take-offs as well as shutdown and alarms for water flow/temperature and pressure.