Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Aug 09, 2006 Available in 6 sizes, Aquamat uses 4-stage separation process to separate oil from condensate. It eliminates need for disposal by outside contractors, does not require electricity, and is designed to require minimal maintenance. Developed to facilitate disposal of compressed air system condensate, system has integrated manifold system that allows several condensate lines to be attached to one Aquamat for streamlined system operation.

Sanborn Technologies, North American Filtration of Massachusetts, Inc.
Walpole, MA 02081
May 12, 2006 Turbo-Separator T14RCS features processing rate of up to 40 gpm with solids removal capacity of up to 22 lb before changing liner. Low profile dirty and clean tank receives fluids via gravity directly from machine tool. Offering overflow protection, clean tank includes heat exchanger and supply pump for return of cleaned fluid directly to nozzles in grinder. Discharged dry solids can provide resource recovery for valuable materials, such as carbide.

Dana Corp.
Toledo, OH 43697
Dec 16, 2005 Designed to help meet global emissions standards, MultiTwister(TM) axial cyclonic air/oil separator helps vehicles run cleaner by removing oil particles from engine's air stream. Double helix channels create spiral flow, which develops centrifugal forces that cause oil to coalesce along channels where it separates droplets from engine's airflow. Captured oil is returned to engine crankcase, eliminating excess oil from combustion process.

Donaldson Co., Inc.
Minneapolis, MN 55440-1299
Aug 25, 2005 DS Series removes condensate from compressed air system, wherever it forms, and discharges it in environmentally sound manner. When oil is present, condensate is purified to 100 ppm levels of residual oil content before discharged to public water treatment systems. Compressed air condensate oil/water separators feature multiple condensate inlet ports, tapered carbon bag chambers, knob-adjustable oil skimming tray, and attached, hinged lid.

GE Energy
Atlanta, GA 30339
Jul 08, 2005 Suited for oil and gas industries, SmartScan™ performs in-line corrosion inspection of pipelines deemed unpiggable because of valve restrictions, multiple pipeline diameters, or multiple sharp bends. Flexible structure allows it to navigate pipeline diameter variations from 16–20, 20–26, and 24–30 in. Operators can launch and receive SmartScan via use of hot tap access hole, which is drilled into pipeline walls without interruption of service.

Birchwood Casey
Eden Prairie, MN 55344 2138
May 17, 2005 Safe Scrub® OS lifts oil from iron and steel parts and then floats oil residue to liquid surface for removal from tank by oil skimmer or coalescing filter. Used as stand-alone cleaner or pre-cleaner, product is effective on mineral oil grinding coolants, drawing and stamping lubes, and hydraulic oils as well as water soluble/synthetic fluids and surface soils. Normal cleaning cycle calls for 5–10 min soak at 120 to 150°F.

Universal Separators, Inc.
Madison, WI 53705
Feb 22, 2005 SmartSkim® Magnom magnetic separators have no moving parts and remove submicron sized contaminants. Various standard models are available in sizes from 3/8 to 2 in. pipe line with contaminant capture capacities up to 254 in.³ or 4,000 g. Magnoms can also be installed on parts washers to maintain cleanliness specifications and keep nozzles clean.

Abanaki Corp., Oil Skimmer Div.
Chagrin Falls, OH 44023
Nov 04, 2004 Chiperatorâ„¢ Chip and Coolant Separation System vacuums and filters old cutting fluids loaded with chips out of machine tool sumps into 55-gal drum. It separates chips from coolant and returns clean, filtered coolant to machine sump. Air-driven system with venturi design has no moving parts and strains 40 gal of chips and coolant/minute. Float valve shuts off unit when drum is full, and automatic pressure relief valve is provided for added safety.

Mayfran International
Cleveland, OH 44143-0038
Oct 11, 2004 ConSep® CrosBeltâ„¢ Coolant Cleaning Separator combines technologies of single-platform chip conveyor and coolant cleaning system with sloped bottom coolant tank integrated into vertical orientation. Large clean out portals at bottom facilitate sludge removal and cleaning. Since ports are located at bottom of tank, pump equipment and filter devices do not have to be removed and reassembled. Indexing filter drum removes chips and contaminates to 25 micron level.

Alfa Laval Inc.
Richmond, VA 23231
Aug 23, 2004 Occupying less than 18 ft² of floor space, AlfaPure Z3 centrifugal separation system handles tank volumes up to 80,000 gal. Installed in bypass flow, it provides continuous removal of tramp oil, grease, and particles from metalworking coolants and wash liquids. With automatic operation, system requires no supervision. PLC-based control system is operated from touchscreen that provides overview of system and allows touch control of all functions.

Separation Dynamics Inc.
Fountain Inn, SC 29644
Jul 27, 2004 SKIMZOILâ„¢ removes free-floating oils from washers, coolant sumps, and other process tanks. Floating suction head pulls oils from tank, which are trapped by weirs in separation tank and picked up by oil-attracting, rotating drum. Oils picked up by drum are scraped off with spring-loaded wiper tray and plumbed into separate waste vessel. Available in several sizes, system does not require frequent adjustment, monitoring, or flow balancing.

Separation Dynamics Inc.
Fountain Inn, SC 29644
Jul 21, 2004 Cellulose-based, Extran™ Ultrafiltration System, Model E removes free oil, emulsified oil, and particles from parts washing water and returns clean water and soluble detergent to wash bath. Portable, stainless steel unit is built on 3 x 4 ft skid with casters and can process 100–500 gpd. Unlike conventional ultrafiltration, Extran™ membrane requires no cleaning.

Graymills Corporation
Chicago, IL 60613
May 14, 2004 Model OSEP-2 portable fluid-conditioning filtration system and oil/water separator removes tramp oils from water-based coolants used in machining centers. Featuring 17 gal capacity and heavy-duty casters, system can be moved throughout plant. It helps keep bacteria levels to minimum, as well as smoking caused by oils in coolant coming in contact with hot tooling. Model OSEP-2 requires 50 psi for operation; no electrical connection is needed.

Mi-T-M Corporation
Peosta, IA 52068
Apr 28, 2004 Intended for rental facilities that have access to sanitary sewer, Series WOS above-ground separator offers up to 30 gpm discharge. Unit lowers oil content in vehicle wash-water prior to discharge. It features ¾ hp inline srainer pump, aluminum cover, 304 stainless steel 3-chamber tank with oil coalescing grids, V-shaped bottom, oil decanter, and 20 g/day corona discharge ozone generator for quick kill of odor cauing bacteria.

Westfalia Separator, Inc.
Northvale, NJ 07647
Jan 26, 2004 With gas-tight design suited for miscella refining and biodiesel production, RSE 300 uses 4,800 rpm motor and inverter with VFD drive, eliminating need for gears, clutches, and belts. Design has 50,000 kg/hr capacity in refining and degumming and minimizes number of necessary bearings.

Redi/Controls, Inc.
Greenwood, IN 46143 1406
Nov 21, 2003 Industrial OAM Purger removes oil, acid, and moisture from chiller's refrigerant charge down to trace levels. System is available with NEMA 4 or Hazardous Area control enclosure options.

Sanborn Technologies
Medway, MA 02053
May 30, 2003 Freddy TOS removes oil from water in applications ranging from machine tool sumps to parts washing systems to wastewater. Running continuously while equipment is in operation, portable unit can be moved from one location to another. Filter cartridge can be removed and cleaned, and diaphragm pump provides low shear on oil for separation at flow rates up to 1.5 gpm. Available in 2 models, unit may be electronically driven or air operated.

Mars Tech
New City, NY 10956
Apr 25, 2003 Alfie 200 high-speed, direct-drive, disc-bowl separator mounts directly on coolant tank and keeps coolants free from oil and bacteria. It features capacity of 60–75 gph, and if desired, operates continuously even when machine tool is not in operation. Centrifuge is intended for use in shops with small number of machine tools. It is also suitable for de-oiling neutral pH wash solutions.

Algae-X International
Ft. Meyers Beach, FL 33932
Apr 25, 2003 Self-contained FPS-500 allows fuel to be periodically re-circulated to remove water, sludge, and inorganic debris as well as eliminate microbial contamination. Components include Separ Fuel/Water Separator and Filter, 6 hr manual timer, fuel pressure gauge, and continuous-duty gear pump. Unit improves and maintains quality of diesel fuel, hydraulic oil, and other distillate fuels for improvement in filtration, combustion, and fuel stability.

Yasda Precision America Corporation
Elk Grove Village, IL 60007
Sep 23, 2002 Oil Pure MS-BZ features Quick Suction Pot System (Q Pot) that collects floating substances through automatic surface suction, regardless of turbulence of fluid. It requires no liquid-level adjustment after installation. Pump uses bellows-type design to separate floating substances smoothly, without further agitation. Adjustable surface levels allow users to change settings to separate fluids of different weights and viscosities.