Liquid & Liquid Separators

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Waste Handling Equipment

AFL Industries' Specialty Wastewater Treatment Product Line Upgraded

February 2, 2016

AFL Oil Stop Valves To Be Showcased at EUEC Conference RIVIERA BEACH, FL — Since its acquisition of AFL Industries (www.aflindustries.com), RGF Environmental Group, Inc. has significantly grown the global footprint and brand for this manufacturer of high-quality, prefabricated oil/water separators, oil stop valves and other specialty wastewater... Read More

Chemical Processing & Waste Management, Material Handling & Storage, Waste Handling Equipment, Green & Clean

Material Recovery Station separates liquids from solids.

July 27, 2015

With screening panel set inside leak-proof, bulk plastic container, Model MRS-30 automatically screens out and captures solid particles while allowing liquids to safely pass through and accumulate in container bottom. When filled to its 30-gal capacity, self-contained unit may be drained to allow liquids to be reprocessed and reused on-site while solids may be sold as highly marketable scrap. Recycling system is forkliftable without pallet and stands on 44 x 44 in. footprint. Read More

Chemical Processing & Waste Management

Filtration Membranes effectively separate oil from water.

May 6, 2015

Offered as pre-cut test coupons, sheets, and disks, Synder Filtration PX, PY, and PZ Polyacrylonotrile (PAN) ultrafiltration membranes are designed for oil removal in wastewater treatment applications and can fill process requirements where presence of oils in industrial effluent hinder downstream processes. These hydrophilic membranes feature molecular weight cut-offs (MWCOs) of 400 kDa (PX), 100 kDa (PY), and 30 kDa (PZ). Custom sizes are also available. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC, Services, Transportation Industry Products

Vortox Air Technology Produces Superior Air Filtration Solutions

October 22, 2014

Among Vortox's Strengths Are Its Custom Production, On-Site Engineering, Deep Draw Capabilities, and Customer Collaboration Claremont, CA—Vortox Air Technology, Inc., an American manufacturer of innovative solutions to air filtration needs for many industries, offers a wide variety of products, accessories, and services. Vortox excels at producing custom, high-quality, diverse... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC

PneumaticPlus Air Preparation and Cleaning Equipment

August 5, 2014

PneumaticPlus air preparation & cleaning equipment provides clean, dry air necessary to achieve the optimal performance for your pneumatic system. Our innovative technology allows the separation of impurities such as moisture, oil, and other foreign particles from compressed air. We offer many variations and sizes to accommodate any application. PneumaticPlus offers a complete line consisting... Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment

Take Your Calculator to the ISSA Tradeshow

July 9, 2014

The ECO-500, on display at the upcoming ISSA tradeshow in Orlando, filters and recycles cleaning solution up to seven times, making it one of the Greenest extractors available. But what does this mean for carpet cleaning technicians? Quite a lot. According to ISSA's 540 Cleaning Times, a conventional extractor requires 21 water/solution dump/refills to clean 5,000 square feet. The ECO-500... Read More

Chemical Processing & Waste Management

Material Recovery Station separates liquids from solids.

June 26, 2014

Available in several sizes and capacities, on standard 44 x 44 in. footprint, MOD Material Recovery Station automatically separates liquids from solids to allow both to be collected and processed for recycling or for sale. Self-contained system sets plastic screening panel inside leakproof, reusable, ShipShape™ bulk plastic containers. Solid particles are screened and safely accumulated inside while liquids are safely contained in bottom until ready to be drained. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Green & Clean

Linde Nitrogen Liquefier Comes On-Stream at Ohio Air Separation Plant

April 10, 2014

Murray Hill and New Providence, New Jersey, U.S. – Linde North America has completed construction of a nitrogen liquefier at its Delta, Ohio, air separation plant that significantly increases its ability to support the growing demand for the product in the Ohio and Midwest markets. The new facility produces 575 tons per day liquid nitrogen by capturing molecules the plant is already... Read More

Chemical Processing & Waste Management

Liquid-Solid Separator helps reduce BOD in wastewater.

February 27, 2014

Filling gap between offal screen and Dissolved Air Filtration system, Micro Drum Screen™ uses screens with mesh sizes of 200 microns, enabling operators to recover extra product during initial processing stages of foods ranging from vegetables to proteins such as beef or poultry. Specifically, system reduces Biochemical Oxygen Demand, Total Suspended Solids, and Total Kjeldahl Nitrogen. Depending on processing speed and type of mesh used, recovered material amounts can range from 600–1500 lb/hr. Read More

Chemical Processing & Waste Management, Services, Test & Measuring Instruments

EQ Provides Solutions for the Toughest Environmental Problems

January 7, 2014

EQ — The Environmental Quality Co. Where do you turn when you're faced with one of the industry's toughest environmental problems? Today, many turn to EQ, one of the nation's industrial service leaders, specializing in difficult environmental problems and offering safe, reliable and cost-effective solutions. With its recent acquisition of Allstate Power Vac Inc. (APV), EQ offers customers... Read More

Chemical Processing & Waste Management, Waste Handling Equipment

The "Beast" Draws a Crowd in Richmond Illinois

December 9, 2013

Rockford, Illinois — In late October, Enviro-Care sponsored a demonstration of its innovative septage receiving system installed at the Richmond Illinois WWTP.  The "Beast" is the screening component of the Enviro-Care Liquid Waste Hauler System which is designed to pre-treat septage by removing the solids from this highly concentrated flow.  In addition to the Beast, the full system... Read More

Chemical Processing & Waste Management

A Water Treatment Plant Reduces Costs of Removing Algae with a New Process

November 5, 2013

Russell Finex supply Liquid Solid Separators to help remove algae at a water treatment plant With spring and summer giving rise to the formation of algal blooms, it is necessary for treatment plants to remove all the algae from the water before it is further treated. One common water treatment process involves pumping raw water into two large continuously revolving micro strainers, which... Read More

Chemical Processing & Waste Management

Tanks Direct Now Supplies Aboveground Oil Water Separators

November 1, 2013

Oil water separators are used in a variety of industrial applications to remove oil, grease, light petroleum products, and oily coated solids from wastewater before it is discharged into municipal sewer systems. This keeps these substances from causing environmental damage and also lessens the burden on wastewater treatment plants. Tanks Direct can design, supply, install and service both... Read More

Chemical Processing & Waste Management, Services, Green & Clean

Linde Breaks Ground for a State-Of-The-Art Air Separation Unit (ASU) in Texas

June 27, 2013

•        Largest Linde ASU in the U.S. •        On-stream in first quarter 2015 •        Ceremonies attended by local, state and federal government officials Murray Hill and New Providence, New Jersey, U.S. – Linde North America has broken ground for a large, state-of-the art air separation unit (ASU) plant in La Porte, Texas. The ASU, part of a $200 million... Read More

Chemical Processing & Waste Management

Clean Steam Separator meets sterilization requirements.

February 15, 2013

Constructed of 316L stainless steel, Model CS10 is engineered to overcome problems associated with wet steam and ensure correct quality of steam is supplied to point of use, preventing damage to control valves. Fully traceable unit exceeds steam dryness value of 0.95 and features removable baffle that facilitates periodic de-rouging and inspection. CS10 is engineered in accordance with latest standard of ASME BPE guide for biopharmaceutical, food, and medical industries. Read More

Chemical Processing & Waste Management, Material Handling & Storage

Eriez Earns Trademark Registration for Color Orange on Suspended Electromagnets

February 6, 2013

Erie, PA - Eriez' suspended electromagnets have always stood out with their distinctive orange exteriors. Now the color orange on SE magnets has been granted a trademark registration from the U.S. Patent and Trademark Office.<4444>Trademark Registration Number 4,246,466 was issued for the color of orange, for industrial machines, namely, magnetic separators in the form of suspended... Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment, Fluid & Gas Flow Equipment, Material Handling & Storage, Green & Clean

Coolant Sump Cleaner supports large metal machining operations.

January 18, 2013

Mounted on electric, 48 V Columbia Par Car Truck, CP50-200/200CB5 Combination Coolant Sumpcleaner/Dispenser is equipped with 200 gallon tank for collecting and filtering dirty coolant and 200 gallon tank for dispensing clean coolant. Utilizing pump powered by Kohler 20 hp, 4-stroke engine with electric start, sump cleaner pumps fluid at 110 gpm and generates suction to 13 in. Hg. Dirty coolant passes through F23 filter which separates chips and swarf and can hold 2.3 ft³ of solids. Read More

Chemical Processing & Waste Management

Liquid Solid Separator offers separation down to 10 micron.

December 11, 2012

Adaptable to virtually any process, Liquid Solid Separator&trade; removes solids from liquids using centrifugal action of its impeller. Multipurpose machine can process 15,000 gph of materials such as pulps, fibers, insoluble particles, dairy, and wastewater, and design keeps meshes clear of oversize particles to ensure unrestricted liquid flow. Variable-speed drive and angle adjustment provides complete control over moisture content of solids while maintaining constant solids removal. Read More

Chemical Processing & Waste Management

Eriez® Hydroflow® Portable Tramp Oil Separator Features Compact Design for Small Metalworking Plants

November 29, 2012

Erie, PA - The compact design of the Eriez® Hydroflow® Portable Tramp Oil Separator is an ideal choice for small metalworking plants. The high-speed centrifuge built into the portable separator delivers exceptionally clean fluid with tramp oil levels below 0.5 percent and metallic solids in the 2 to 5 micron range.<4444>Reducing tramp oil is a high priority for all metalworking shops. Excess... Read More

Chemical Processing & Waste Management

Rare-Earth Magnetic Separator improves industrial fluid quality.

October 16, 2012

As 10,000 gauss-rated magnetic separator, The Boss can remove sub-micron ferrous fines from industrial fluids in various applications. Product installs into existing or newly installed bag filter housings, improving and extending life of machining coolants, quench fluids, and parts washer baths. Available for size No. 2 housings, standard separator unit handles fluid temperatures to 175°F and can help reduce amount of consumable filter bags used in operations. Read More