Eriez Magnetics
Erie, PA 16514
Oct 01, 2007 Utilizing 2 magnet circuits surrounding chute, Deep Reach Magnetic Separators penetrate product flow such as cocoa, powdered cheese, sugar, starch, flour, gypsum, and other sticky products. Xtreme(TM) Rare Earth magnet circuit is available to remove fine or weakly magnetic ferrous contaminants, while traditional ceramic magnet circuits can be selected to remove larger tramp metal. For food or corrosive environments, all stainless steel construction is available.

TLV Corporation
Charlotte, NC 28273
Sep 19, 2007 Model SF1 Stainless Steel Separator-Filter removes condensate/particulates such as dirt and scale from dry steam or inert gas supplies. System delivers dry steam through cyclone separator to eliminate water spots and eliminates matter before filtering to reduce maintenance requirements. Other features include five-layered sintered wire mesh filter, one-piece design, CF8 stainless steel construction, and clamp design for fast disassembly.

IDEX Corp.
Northbrook, IL 60062
Sep 14, 2007 Suited for diagnostic and life science instruments, Systec® Debubbler Series builds on passive bubble-trap technology with active bubble removal and transfer-line degassing. Available configurations - active debubbler, degasser/debubbler, or transfer-line degasser - offer choice of removing bubbles with or without also removing dissolved system gases. Online active debubbling minimizes sample loss and reagent usage while promoting analytical accuracy.

Rex-Cut Products, Inc.
Fall River, MA 02720
Aug 14, 2007 Available in coarse, medium, fine, and very-fine grades, Sigma-Screen(TM) Multipurpose Discs are depressed center, Type 27 abrasive wheels that feature blend of zirconia-ceramic abrasive grains bonded to flexible mesh. Chatter-free discs will not clog and can be stacked on grinder for extended life. In addition to fiberglass, 4.5 in. diameter wheels are also effective on stainless steel, metals, aluminum, and wood.

Fenwal, Inc.
Schaumburg, IL 60193
Aug 10, 2007 Available on 500 mL whole blood filter Blood-Pack® units, Fenwal Express(TM) System requires no manual squeezing of air from post-filter container or priming to get started. Truly closed system also has no vents or caps to manipulate. To use, operator clamps bypass line, breaks cannula to begin filtration, and once filtration is complete, unclamps bypass line to allow air to automatically expel from post-filter container into primary container.

Wheelabrator Group - Parts & Service
La Grange, GA 30240
Aug 09, 2007 Able to be installed on Wheelabrator® and non-Wheelabrator blast equipment, low-profile magnetic separator pulls steel shot or grit from sand or other nonferrous material using magnetic rotating drum. This process helps eliminate primary cause of wear on foundry blast equipment, reduces blast cycle times and equipment maintenance, and increases life of replacement parts. It also serves to reduce air ventilation requirements for shot blasting equipment.

TURCK, Inc.
Plymouth, MN 55441
Aug 06, 2007 Designed to increase connection possibilities in dual-input applications or M8-connectorized junction boxes, M8 picofast® splitters consolidate two M8 picofast or two M12 eurofast® connector branches into one M8 connector. There is choice of simple connector or connector with extension cable of any length. Splitters are available with PUR overmold and PVC, PUR, and other cable jackets. Rated to 125 V and 4 A, connectors provide NEMA 1, 3, 4, 6P, and IEC IP67 protection.

Samscreen, Inc.
Binghamton, NY 13902
Jul 30, 2007 Grizzly Finger Deck(TM) incorporates finger deck design with 1 3/8 in. thick heavy-duty Maxwear(TM) forged steel tines resistant to impact and abrasion. Featuring polyurethane shock absorption system, step-deck design enables material to cascade from one cross section to next. Compatible with existing machines, product utilizes Maxwear(TM) Technology and offers adjustable cross-section pitch that allows for increased/decreased material feed.

Algae-X International
Ft. Meyers Beach, FL 33932
Jul 24, 2007 Operating on 12 Vdc power, Model TK-180 XT provides complete packaged fuel polishing system for re-circulating, cleaning, and/or transferring diesel fuel and light oils. With flow rate of 180 gph, system removes water, sludge, and sediments from diesel-powered vessels, stand-by generators, trucks, buses, and heavy equipment with up to 200 gal fuel tanks.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Jul 10, 2007 Utilizing 4-stage separation process, Aquamat automatically separates oil from condensate and virtually eliminates need for disposal by outside contractors. It includes integrated manifold system that allows several condensate lines to be attached to one Aquamat for streamlined system operation. Available in 6 sizes, system does not require electricity and is low maintenance.

Kason Corporation
Millburn, NJ 07041
Jun 26, 2007 Including Air-Lift quick-access system that includes 2 vertically mounted air cylinders, circular vibratory screeners allow for rapid interior cleaning, inspection, and screen changes. Featuring 40-84 in. dia, screeners come with single or multiple decks, screens with or without center holes, and/or anti-blinding devices. Units are available in mild steel or in stainless steel finished to 3-A, cGMP, USDA, FDA, or industrial standards.

Network Technologies, Inc. (NTI)
Aurora, OH 44202
Jun 04, 2007 Model SPLITMUX-SVDVI-2 allows users to simultaneously display and monitor video signals from 2 different computers or video sources on single screen. Combining functions of video wall processor, video scaler, PiP generator, and audio/video switch, device supports resolutions up to 1,900 x 1,200 and can de-interlace 1080i to 1080p. Controllable via IR remote control, front panel interface, or RS232 commands, it enables operators to rotate, stretch, and crop multiple images.

Kleentek
Cincinnati, OH 45242
May 30, 2007 Kleentek electrostatic oil cleaning system features purge system where filtered compressed air or nitrogen is used to pressurize enclosure, preventing explosive gasses, vapors, or dusts from entering equipment. System uses electrostatic forces to remove contaminants from oil that cause tar, varnish, or sludge. Suited for refinery, natural gas, chemical, and petrochemical applications, it does not require operator supervision and runs 24/7.

Zebra Skimmers Corp
Solon, OH 44139
Apr 30, 2007 Muscle Coalescer Series separates tramp oil from individual metalworking fluid sumps to prevent bacterial rancidity and extend coolant life. To accommodate varying applications, series if offered with several customized options. These include selection of body type to meet needs of coolant type, filter bag micron size, and appropriate intake attachment. Air and electric diaphragm pump upgrades are also available for multiple machine use.

Kason Corporation
Millburn, NJ 07041
Apr 25, 2007 Intended for applications that require screening in batches, VIBROSCEEN® 3-in-1 System features integral feed control device that regulates flow of material into screener. Vibration is isolated from surge hopper and support frame by means of flexible connector. Constructed of stainless steel, screener system ranges in size from 18-40 in. and is offered with single or multiple screening decks, separating particles in 1-5 predetermined sizes from 2 in. to 500 mesh.

Kason Corporation
Millburn, NJ 07041
Feb 28, 2007 Offered in 24, 30, 40, 48, and 60 in. dia, Flo-Thru Sifter scalps oversize particles down to 38 microns from dry bulk materials or solids-laden slurries. Employing 2 unbalanced-weight gyratory motors mounted on opposite exterior sidewalls, unit enables on-size particles to pass through screen in vertical discharge path, while oversize material can be removed manually or with vacuum. Gap-free screen frame with quick-disconnect clamps and crevice-free interior allow thorough washdown.

Kason Corporation
Millburn, NJ 07041
Jan 09, 2007 Compliant with cGMP, 3-A, USDA, and FDA standards, Vibroscreen® Ultra-Sanitary Double-Deck Screener is designed for scalping, de-dusting, and dewatering of contamination-sensitive materials. Controls, housed in lockable panel, can interface with PLCs for remote operation. In addition to gap-free screen frames, quick-release U-clamps, and radius corners, machine features domed lid, Air-Lift device, continuous ground and polished welds, gap-free interior, and washable underside.

Kason Corporation
Millburn, NJ 07041
Dec 20, 2006 Intended for food, dairy, and pharmaceutical applications requiring wash-down, Centri-Sifter® Model GO features 2 externally mounted bearings that allow internals to slide freely from shaft end for cleaning, screen changes, or inspection. Units come with nylon monofilament, woven wire, or wedgewire screen cylinders, and are offered in configurations for continuous operation in-line with dilute-phase pneumatic conveying systems, as well as gravity-fed applications.

Wyatt Technology Corp.
Santa Barbara, CA 93103
Dec 08, 2006 Based on asymmetrical Flow Field-Flow Fractionation, Eclipse system requires only one pump to generate all 3 required flow rates. Samples can be separated according to hydrodynamic radius in selected channel by interacting with cross-flow permeating through bottom wall. Developed for pharmaceutical industry, unit can characterize antibody preparations with respect to aggregation and identify impurities/contaminants at lower detection limit.

Russell Finex
Pineville, NC 28134
Dec 06, 2006 Enabling processors to screen and transport material simultaneously, Blow Thru Sieve(TM) eliminates double handling. It allows good product to pass through vibrating mesh screen while removing oversize contamination from powders during dilute phase pneumatic conveying. By combining powder screening and positive pressure conveying, throughputs up to 60,000 lb/hr are achieved. Unit assembles and disassembles with single tool, and is mounted on mobile stand for use at multiple locations.