Kason Corporation
Millburn, NJ 07041
Dec 17, 2007 Measuring 24 in. dia, VIBROSCREEN FLO-THRU Model K24-1FT-SS is constructed of stainless steel and finished to 3-A, FDA, and BISSC standards. It employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls, minimizing height requirements. Mounted on suspension brackets, design also allows vertical alignment of top inlet and bottom outlet, enabling on-size material to descend through screen in straight-through path.

SWECO®, Div. of M-I L.L.C.
Florence, KY 41022
Dec 10, 2007 With open base construction, MX Separator allows for cleaning underneath unit, preventing dirt and product build-up. Base also eliminates all gussets and external crevices where product can become trapped. Totally enclosed weight guard prevents reach-in injuries and complies with European CE Standards. Using angled support springs, machine minimizes aggressive vibration that typically occurs during shutdown.

Kason Corporation
Millburn, NJ 07041
Nov 12, 2007 Centri-Sifter Model MO features cantilevered shaft with 2 externally mounted bearings that allow all internals to slide from shaft end for cleaning, screen changes, or inspection. System is intended for food, dairy, and pharmaceutical applications requiring thorough wash-down as well as applications involving frequent screen changes/inspections or runs of multiple materials where cross-contamination is of concern. It is available with compliance to USDA, FDA, BISSC, and 3-A standards.

Kason Corporation
Millburn, NJ 07041
Nov 09, 2007 Intended for food, dairy, and pharmaceutical applications requiring thorough wash-down, Centri-Sifter® Model MO features cantilevered shaft with 2 externally mounted bearings between screening chamber and motor drive, allowing all internals to slide from shaft end for cleaning, screen changes, or inspection. Unit is available with compliance to USDA, FDA, BISSC, 3-A, and other US and European sanitary standards, with Nylon monofilament, woven wire, or wedgewire screen cylinders.

K-Tool International
Wixom, MI 48393
Nov 02, 2007 Reversible jaw pullers provide optimal pressure, tightening around part to facilitate removal. Manufactured from alloy, heat-treated steel, products range in size from 3-6 in. and offer 2- to 5-ton capacities. Bearing separators have max spread of 4¼ in. and feature flush knife-edge blades that get behind work where other tools cannot fit or grip. They are made from heat-treated steel and remove generator gears, bearing cones, bearings, and similar parts.

Rotex, Inc.
Cincinnati, OH 45223 1845
Oct 09, 2007 MEGATEX XD(TM) Separator features 25-50% capacity per square ft of screen cloth in compact footprint, screen deck slope of 6°, and external drive cartridge that permits continuous operation up to 400°F. Elliptical-linear motion enables handling course to fine separations from ¼ in. to 100 mesh (6.3 mm to 150 µm). Unit includes lift-rail system, discharge door, single reaction cartridge with 2 spherical roller bearings, and support shaft suspension system with industrial U-joint bearings.

Size Reduction Specialists, Corp. (SRS)
East Lansing, MI 48823
Oct 03, 2007 Featuring compact design for press-side operation, SRS Separator removes powder from granulated plastic materials to promote consistent productivity and reliable quality. It reduces fines, dust, and powder created by screen-type, press-side granulators by 80-85% to protect integrity of processed materials as well as reduce problems such as rejected parts and downtime resulting from super-fine waste material that burns and adheres to interior wall of barrel.

Eriez
Erie, PA 16514 0608
Oct 01, 2007 Utilizing 2 magnet circuits surrounding chute, Deep Reach Magnetic Separators penetrate product flow such as cocoa, powdered cheese, sugar, starch, flour, gypsum, and other sticky products. Xtreme(TM) Rare Earth magnet circuit is available to remove fine or weakly magnetic ferrous contaminants, while traditional ceramic magnet circuits can be selected to remove larger tramp metal. For food or corrosive environments, all stainless steel construction is available.

TLV Corporation
Charlotte, NC 28273
Sep 19, 2007 Model SF1 Stainless Steel Separator-Filter removes condensate/particulates such as dirt and scale from dry steam or inert gas supplies. System delivers dry steam through cyclone separator to eliminate water spots and eliminates matter before filtering to reduce maintenance requirements. Other features include five-layered sintered wire mesh filter, one-piece design, CF8 stainless steel construction, and clamp design for fast disassembly.

IDEX Corp.
Northbrook, IL 60062
Sep 14, 2007 Suited for diagnostic and life science instruments, Systec® Debubbler Series builds on passive bubble-trap technology with active bubble removal and transfer-line degassing. Available configurations - active debubbler, degasser/debubbler, or transfer-line degasser - offer choice of removing bubbles with or without also removing dissolved system gases. Online active debubbling minimizes sample loss and reagent usage while promoting analytical accuracy.

Rex-Cut Products, Inc.
Fall River, MA 02720
Aug 14, 2007 Available in coarse, medium, fine, and very-fine grades, Sigma-Screen(TM) Multipurpose Discs are depressed center, Type 27 abrasive wheels that feature blend of zirconia-ceramic abrasive grains bonded to flexible mesh. Chatter-free discs will not clog and can be stacked on grinder for extended life. In addition to fiberglass, 4.5 in. diameter wheels are also effective on stainless steel, metals, aluminum, and wood.

Fenwal, Inc.
Schaumburg, IL 60193
Aug 10, 2007 Available on 500 mL whole blood filter Blood-Pack® units, Fenwal Express(TM) System requires no manual squeezing of air from post-filter container or priming to get started. Truly closed system also has no vents or caps to manipulate. To use, operator clamps bypass line, breaks cannula to begin filtration, and once filtration is complete, unclamps bypass line to allow air to automatically expel from post-filter container into primary container.

Wheelabrator Group - Parts & Service
La Grange, GA 30240
Aug 09, 2007 Able to be installed on Wheelabrator® and non-Wheelabrator blast equipment, low-profile magnetic separator pulls steel shot or grit from sand or other nonferrous material using magnetic rotating drum. This process helps eliminate primary cause of wear on foundry blast equipment, reduces blast cycle times and equipment maintenance, and increases life of replacement parts. It also serves to reduce air ventilation requirements for shot blasting equipment.

Turck USA
Minneapolis, MN 55441
Aug 06, 2007 Designed to increase connection possibilities in dual-input applications or M8-connectorized junction boxes, M8 picofast® splitters consolidate two M8 picofast or two M12 eurofast® connector branches into one M8 connector. There is choice of simple connector or connector with extension cable of any length. Splitters are available with PUR overmold and PVC, PUR, and other cable jackets. Rated to 125 V and 4 A, connectors provide NEMA 1, 3, 4, 6P, and IEC IP67 protection.

Samscreen, Inc.
Binghamton, NY 13902
Jul 30, 2007 Grizzly Finger Deck(TM) incorporates finger deck design with 1 3/8 in. thick heavy-duty Maxwear(TM) forged steel tines resistant to impact and abrasion. Featuring polyurethane shock absorption system, step-deck design enables material to cascade from one cross section to next. Compatible with existing machines, product utilizes Maxwear(TM) Technology and offers adjustable cross-section pitch that allows for increased/decreased material feed.

Algae-X International
Ft. Meyers Beach, FL 33932
Jul 24, 2007 Operating on 12 Vdc power, Model TK-180 XT provides complete packaged fuel polishing system for re-circulating, cleaning, and/or transferring diesel fuel and light oils. With flow rate of 180 gph, system removes water, sludge, and sediments from diesel-powered vessels, stand-by generators, trucks, buses, and heavy equipment with up to 200 gal fuel tanks.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Jul 10, 2007 Utilizing 4-stage separation process, Aquamat automatically separates oil from condensate and virtually eliminates need for disposal by outside contractors. It includes integrated manifold system that allows several condensate lines to be attached to one Aquamat for streamlined system operation. Available in 6 sizes, system does not require electricity and is low maintenance.

Kason Corporation
Millburn, NJ 07041
Jun 26, 2007 Including Air-Lift quick-access system that includes 2 vertically mounted air cylinders, circular vibratory screeners allow for rapid interior cleaning, inspection, and screen changes. Featuring 40-84 in. dia, screeners come with single or multiple decks, screens with or without center holes, and/or anti-blinding devices. Units are available in mild steel or in stainless steel finished to 3-A, cGMP, USDA, FDA, or industrial standards.

Network Technologies, Inc. (NTI)
Aurora, OH 44202
Jun 04, 2007 Model SPLITMUX-SVDVI-2 allows users to simultaneously display and monitor video signals from 2 different computers or video sources on single screen. Combining functions of video wall processor, video scaler, PiP generator, and audio/video switch, device supports resolutions up to 1,900 x 1,200 and can de-interlace 1080i to 1080p. Controllable via IR remote control, front panel interface, or RS232 commands, it enables operators to rotate, stretch, and crop multiple images.

Kleentek
Cincinnati, OH 45242
May 30, 2007 Kleentek electrostatic oil cleaning system features purge system where filtered compressed air or nitrogen is used to pressurize enclosure, preventing explosive gasses, vapors, or dusts from entering equipment. System uses electrostatic forces to remove contaminants from oil that cause tar, varnish, or sludge. Suited for refinery, natural gas, chemical, and petrochemical applications, it does not require operator supervision and runs 24/7.