Kason Corporation    Millburn, NJ 07041
Dec 20, 2006 Intended for food, dairy, and pharmaceutical applications requiring wash-down, Centri-Sifter® Model GO features 2 externally mounted bearings that allow internals to slide freely from shaft end for cleaning, screen changes, or inspection. Units come with nylon monofilament, woven wire, or wedgewire screen cylinders, and are offered in configurations for continuous operation in-line with dilute-phase pneumatic conveying systems, as well as gravity-fed applications.

Wyatt Technology    Santa Barbara, CA 93117
Dec 08, 2006 Based on asymmetrical Flow Field-Flow Fractionation, Eclipse system requires only one pump to generate all 3 required flow rates. Samples can be separated according to hydrodynamic radius in selected channel by interacting with cross-flow permeating through bottom wall. Developed for pharmaceutical industry, unit can characterize antibody preparations with respect to aggregation and identify impurities/contaminants at lower detection limit.

Russell Finex    Pineville, NC 28134
Dec 06, 2006 Enabling processors to screen and transport material simultaneously, Blow Thru Sieve(TM) eliminates double handling. It allows good product to pass through vibrating mesh screen while removing oversize contamination from powders during dilute phase pneumatic conveying. By combining powder screening and positive pressure conveying, throughputs up to 60,000 lb/hr are achieved. Unit assembles and disassembles with single tool, and is mounted on mobile stand for use at multiple locations.

Wyatt Technology    Santa Barbara, CA 93117
Nov 16, 2006 As alternative to column chromatography for analysis of protein, biopolymer, and colloidal materials, Eclipse is based on asymmetrical flow field-flow fractionation (AF4). System requires only one pump to generate all 3 flow rates required for analysis, and samples can be separated according to hydrodynamic radius. Eclipse characterizes antibody preparations with respect to aggregation and detects low limits of impurities or contaminants.

Bell & Gossett    Morton Grove, IL 60053
Oct 20, 2006 Designed to automatically remove entrained air in hydronic heating systems, EASB-Jr. is available in ¾, 1, and 1¼ in. sizes with NPT and sweat connections, as well as 1½ and 2 in. sizes with NPT connections. Unit features non-clog venting design, max working pressure of 150 psi, and max operating temperature of 250°F. Brass body construction and stainless steel internal components make it suitable for residential and commercial hydronic heating systems.

Eriez Magnetics    Erie, PA 16514
Oct 11, 2006 Along with magnetic plates, grates, traps, and tubes, ProGrade series features professional-grade magnets and assemblies at 3 different degrees of magnetic strength. ProGrade Ceramic series targets removal of medium to large ferrous contamination, and ProGrade Rare Earth series targets small, fine, weakly magnetic ferrous contamination. Latter features stainless steel construction. Also available, ProGrade Xtreme(TM) series suits food and pharmaceutical-grade assemblies.

Gough Econ Inc.    Charlotte, NC 28266
Oct 10, 2006 Used in applications requiring lengths in excess of 5 ft and widths over 18 in., twin rotary vibratory feeders/screens are suited for feeding, conveying, screening, and elevating material. Four coil springs, located on frame assembly, minimize vibration transfer and ensure gentle handling of material. Since product weight is typically in suspension, self-propulsion energy promotes optimal efficiency. Material is processed at speeds from 50-3,500 ft³/hr.

Mayfran International    Cleveland, OH 44143-0038
Sep 19, 2006 ConSep single-platform chip conveyor/coolant separator removes chips and contaminates to 50 microns in size. Separator has internal chip handling (auger) system, which also handles fines and sediment, and backwash that automatically cycles to indexing filter drum's poly fiber media, making unit maintenance free. Clear access panel enables visual inspection of cleaning process, and filtered coolant is held in holding tank for return to machine tool.

Mayfran International    Cleveland, OH 44143-0038
Sep 19, 2006 Installed on floor or as pit mount and using single pump, VacuFilter(TM) coolant cleaning system works with single machine tools or multiple machines. Contaminated fluids are drawn through filter media supported by septum plate to catch solids, which are pulled away for disposal by drag conveyor. Media is selected based on fluid type, workpiece materials, and process/particulate form. Indexing of media is actuated automatically via sensor monitoring vacuum box pressure.

Advanced Drainage Systems, Inc.    Hilliard, OH 43026
Aug 28, 2006 Incorporating HDPE body and weir plates, Grease Interceptor removes grease from kitchen waste streams before they enter sanitary sewer lines. Watertight sanitary joints are achieved through bell-and-spigot couplers that prevent waste infiltration. With operating pH range of 1.5-14, interceptor is unaffected by strong acids and alkalis. Lightweight, gravity-flow unit is available in capacities of 750, 1,000, and 1,500 gal, and has 8 in. inlet and outlet tees.

Eriez Magnetics    Erie, PA 16514
Aug 25, 2006 Rare Earth Permanent Sight Glass Magnets remove tramp metal contamination from plastic resin and pellets as it passes through site glass loader on its way to molding machine. Featuring continuously welded construction, magnets are available in 4 sizes to fit most site glass loaders. Users can choose between 1 in. or 5/8 in. dia.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Aug 11, 2006 Featuring stainless steel tank enclosure and hopper, SPIRALIFT SC8500 takes screenings discharged from bar screen and washes, grinds, compacts, de-waters, and discharges them into container for disposal. It utilizes 2 hp auger as well as 5 hp grinder with 8 x 20 in. opening and cutter cartridge technology, which replaces individual cutters and spacers with one-piece cartridges. PLC-based control system monitors and integrates entire system.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Aug 09, 2006 Available in 6 sizes, Aquamat uses 4-stage separation process to separate oil from condensate. It eliminates need for disposal by outside contractors, does not require electricity, and is designed to require minimal maintenance. Developed to facilitate disposal of compressed air system condensate, system has integrated manifold system that allows several condensate lines to be attached to one Aquamat for streamlined system operation.

Solberg Manufacturing, Inc.    Itasca, IL 60143
Jul 18, 2006 Available in standardized and customized versions, Vacuum Assisted Oil Mist Eliminator (VAE) consists of vacuum-rated housing, blower system, and coalescing filter element. Vacuum is created by regenerative blower or centrifugal fan. Also available is static oil mist eliminator consisting of filter housing, coalescing element, and drain mechanism. Vacuum control method on VAE can vary from manual bleed filter and valve to automatic, variable frequency drive.

Bunting Magnetics Company    Newton, KS 67114 0468
Jul 10, 2006 Designed for plastics industry applications with limited headroom, low-profile Machine-Mounted Separators (MMS) detect and reject all types of conductive metal contaminants down to 0.5 mm. They incorporate pneumatically driven slide gate combined with venturi-driven vacuum rejection mechanism. Installed at infeed of extrusion, injection, and blow molding machines, these triple-coil metal detectors suit choke feed applications on gravity systems.

JWC Environmental    Costa Mesa, CA 92626
Jul 05, 2006 Auger Monster® XD systems remove and clean flows and solids loading levels in small to medium institutions. Along with 40 in. tall cutter stacks utilizing Macho Monster technology, products feature 10 hp motor on cutting chamber's 2 shafts of 7½ in. cutters to handle large and difficult solids. Single- and double-drum models feature mechanical seals with hex driven design, and operator interface controllers allow on-the-fly changes.

Tecnara Tooling Systems, Inc.    Santa Fe Springs, CA 90670
Jul 03, 2006 Featuring lightweight construction, Reven RECOJET-1® vortex separation system is suited for machining centers, CNC lathes, Swiss-type CNC lathes, EDMs and cutter grinders. Sound attenuated for quiet operation, unit's design mitigates inherent problems of centrifugal systems such as noise, vibration, and low separation efficiency.

Great Western Mfg. Co., Inc.    Leavenworth, KS 66048 0149
May 31, 2006 Offering capacities from 25-300 lb/min on wheat flour, Model QA24 is available with 2-5 sieves with net screen area from 4-10 ft². It is equipped with Tru-Balance drive and pneumatic sieve compression system, and can be dismantled for inspection, maintenance, or cleaning by one person. Directly inserted into vacuum or dilute phase pressure pneumatic conveying system, Model QA24 provides HACCP solution for food, pharmaceutical, and chemical operations.

Rotex, Inc.    Cincinnati, OH 45223 1845
May 18, 2006 Featuring side access doors that facilitate screen cleaning and changes, APEX(TM) produces uses gyratory-reciprocating motion with no vertical motion to keep material in constant contact with screen surface. Ergonomic unit can be maintained by one person and uses 5 lb APEX screens that range in size from ½ in. to 325 mesh. Suited for dry separation screening, product has top cover inspection ports that allow for seal inspection from outside of machine.

Sanborn Technologies, North American Filtration of Massachusetts, Inc.    Walpole, MA 02081
May 12, 2006 Turbo-Separator T14RCS features processing rate of up to 40 gpm with solids removal capacity of up to 22 lb before changing liner. Low profile dirty and clean tank receives fluids via gravity directly from machine tool. Offering overflow protection, clean tank includes heat exchanger and supply pump for return of cleaned fluid directly to nozzles in grinder. Discharged dry solids can provide resource recovery for valuable materials, such as carbide.