Scrubbers

Chemical Processing & Waste Management, HVAC, Green & Clean

Packaged Gas Scrubber removes >99% rail car vent emissions.

April 19, 2016

Able to handle single as well as multiple sources with large variations in venting rates with equal efficacy, ScrubPac™ VentClean™ System can remove over 99% of storage tank and rail car vent emissions caused by breathing and filling operations. Packaged scrubber system uses triple action scrubbing technology and comes in 4 sizes to handle gas capacities from 0–1,500 acfm. Operating configurations are available to use water on once through, reduced rate, or re-circulated basis. Read More

Chemical Processing & Waste Management, Green & Clean

Mobile Gas Cleanup Unit maximizes recovery.

March 23, 2016

Able to scrub up to 98% of carbon dioxide from early flowback natural gas, Mobile Gas Cleanup Unit helps producers maximize recovery while providing environmentally friendly alternative to flaring. Trailer-mounted skid unit can be field deployed to well sites and remote locations, then quickly shut down, purged, and driven to next location. Operators only pay for gas scrubbing capabilities needed, based on length of use and volume of gas flow. Read More

Chemical Processing & Waste Management

Tray Scrubber allows recovery and reuse of acids.

January 19, 2016

Available in sizes to handle gas volumes from 500–150,000 cfm, Series 6000 utilizes special tray designs in single or multiple stages to achieve maximum gas absorption using once through water at extremely low rates. Once through water flow pattern also enables recovery of higher vapor pressure concentrated solutions for reuse in process. For applications where fine mists are formed during absorption, final coalescing filter is used to reduce overall emissions to nearly non-detectable levels. Read More

Chemical Processing & Waste Management, HVAC

Wet Scrubbers capture highly combustible dusts.

October 26, 2015

Combining wet dust collection with plug-and-play operation and low maintenance, Handte Vortex Wet Scrubbers are suited for capture of very sticky dusts and fibers, for processes with high fire loads and flying sparks, and for filtration of highly explosive dusts. Scrubbers use combined principles of water swirl and disintegration to provide 2 levels of separation of dust particles. Operating without filters, units provide 99% removal efficiency on particles of 3.0 micron and larger. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment

Bionomic Gas Scrubbing Equipment Used to Clean Reformer Generated Syngas as Part of Rentech-Clear Fuels Technology Inc. Biorefinery Demonstration Project

September 23, 2015

Bionomic Industries, a worldwide leading manufacturer of cutting edge syngas purification technologies, has recently provided gas cleaning equipment as part of a 20 ton per day demonstration scale Rentech-Clear Fuels gasifier at the Rentech Technology Center (RETC) in Colorado. Integrated with Rentech's existing Product Demonstration Unit (PDU), which consists of Rentech's... Read More

Chemical Processing & Waste Management, HVAC, Materials & Material Processing

Quench/Scrubber Systems treat contaminants from high-temp sources.

July 20, 2015

Available as complete ScrubPac™ Custom Skid-Mounted systems in sizes capable of handling gas capacities from 500–150,000 cfm, Hi-TScrub™ Quench/Scrubber Systems utilize Bionomic advanced horizontal or vertical configuration atomized spray and venturi gas quenchers to cool corrosive hot gas streams up to 2,600°F before scrubbing. Cooled gas with acid vapors, halogens, or particulate is removed with Bionomic Series 5000 Packed Tower or Series 7000 Venturi Scrubber. Read More

Chemical Processing & Waste Management, Green & Clean

Gas Scrubber System removes rail car vent emissions.

June 30, 2015

Using triple action scrubbing technology, ScrubPac VentClean System can provide over 99% removal of storage tank and rail car vent emissions caused by breathing and filling operations. Corrosion-resistant system comes in 4 models to handle gas capacities from 0–1,500 acfm. Type 1 is configured to use water on once through basis, while Type 2 incorporates special circulation pump, using water at reduced consumption rate, or chemical reagent such as sodium hydroxide on re-circulated batch basis. Read More

Chemical Processing & Waste Management

Compact Automatic Wet Scrubber cleans metal masks for 0402 chips.

May 29, 2015

With 430 x 350 mm cleaning area and 40 L tank capacity, 800 x 1,150 x 1,350 mm ACT100Lite is designed for 650 x 550 mm and 600 x 550 mm metal masks used in solder printing as part of process of surface mounting electronic components to PCBs. Scrubbing and drying occur internally, eliminating contact with solvent and exposure to airborne cleaning solution for operator safety. Specialized only in SMT, scubber eliminates flaking of metal masks and does not damage combination metal masks. Read More

Chemical Processing & Waste Management

Tower Scrubbers are engineered to application requirements.

May 22, 2015

Used with water, reactive chemical reagents, or solvent scrubbing liquids, Series 5000 Counter Current Packed Tower Scrubber incorporates max throughput Hi-Flow™ random or structured packing, mist eliminator, and clog-resistant liquid distribution systems. Optional dual packed bed arrangement enables removal of multiple contaminants using different scrubbing reagents in same unit. Scrubbers provide up to 99.9% removal efficiency and come in sizes for 30–300,000 cfm gas flow rates. Read More

Chemical Processing & Waste Management

Venturi Scrubbers come in pre-engineered and tested packages.

May 15, 2015

As fully integrated pre-engineered packages, Series 7000/8000 come with recirculation pump, piping networks, instrumentation, and automated controls. Freeze protection package is available for outdoor installation. Offering versatility to meet PM 10 and PM 2.5 particulate emission standards, systems are available in various materials to enable operation on corrosive or erosive gas contaminant streams. Throat design and diverging section promote collection efficiency at reduced pressure drops. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment, Machinery & Machining Tools, Materials & Material Processing

Nilfisk to Introduce Industry's First Floor to Ceiling Cleaning Solution at Food Safety Summit 2015

April 28, 2015

Now manufacturers can use one company for cleaning equipment to cover their entire facility – from floor, to process area to ceiling.  Nilfisk will feature its new Floor-to-Ceiling Solution at Booth 317 at the Food Safety Summit to be held April 28-30 in Baltimore. Nilfisk's Floor-to-Ceiling Cleaning Solution experts can help manufacturers solve any cleaning challenge – from cleaning... Read More

Chemical Processing & Waste Management

Fluidized Bed Scrubber handles gas from 500-250,000 cfm.

January 19, 2015

Designed with unique swirl induced Coriolis grid that achieves fluidized bed stability, RotaBed provides efficient gas mixing and transfer. Scrubber's turbulent, packless, plug-resistant mass transfer bed is up to 99% open in fluid contact scrubbing zone and delivers high-efficiency gas absorption and particulate collection of over 99% on most applications. Two-stage chevron mist eliminator ensures complete droplet removal from gas exiting scrubber. Read More

Chemical Processing & Waste Management

Packed Tower Scrubbers provide up to 99.9% removal efficiency.

November 21, 2014

Available in full range of sizes for gas flow rates from 30–300,000 cfm, Series 5000 Counter Current Packed Tower Scrubbers incorporate Hi-Flow™ random or structured packing, high-efficiency mist eliminator designs, and variety of clog-resistant liquid distribution systems matched to specific application requirements. Scrubbers are engineered for use with water, reactive chemical reagents, or special solvent scrubbing liquids to recover or minimize liquid waste. Read More

Chemical Processing & Waste Management

Exhaust Scrubber System offers powder dosing option.

October 3, 2014

Capable of handling exhaust from main engines, auxiliary engines, and boilers, PureSOx 2.0 features modular design with equipment distributed across 3 skids. Option of powder dosing applies to both closed-loop and hybrid configurations. Since scrubber itself attenuates noise, it can be positioned before silencer, optimizing vessel stability and minimizing back pressure. PureSOx removes more than 98% of SOx content in exhaust gas, as well as up to 80% of particulate matter. Read More

Chemical Processing & Waste Management

Spray Scrubbers concurrently remove solid and gas particulates.

September 19, 2014

Designed to meet PM 2.5 and PM 10 regulations for particulate in 1 to >5 micron range, Series 9000 Preformed Spray Scrubber simultaneously removes solid and gaseous particulates from dryers and other processing operations. Fine droplet scrubbing liquid spray zone within confined involute section eliminates any bypass of untreated gas, while fully open, cyclonic entrainment removal section without internal droplet removal components promotes reliability and minimizes maintenance. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Quenchers/Scrubbers treat contaminants from high-temp sources.

July 7, 2014

Hi-TScrub™ Quench/Scrubber Systems utilize horizontal or vertical configuration atomized spray and venturi gas quenchers to cool corrosive hot gas streams up to 2,600°F before scrubbing. Cooled gas with acid vapors, halogens, or particulate is removed with Bionomic Series 5000 Packed Tower or Series 7000 Venturi Scrubber. All units are available as complete ScrubPac™ Custom Skid-Mounted systems in sizes to handle gas capacities from 500–150,000 cfm. Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment

Wet Floor Scrubbing System removes 99.3% of bacteria.

January 10, 2014

Equipped with scrubbing brush that spins at over 600 rpm, Scooba® 450 uses Three-Cycle Cleaning Process that automatically sweeps and pre-soaks, scrubs, and finishes with final squeegee. Users can choose full 40-minute cycle for up to 300 ft² or 20-minute cycle for smaller spaces up to 150 ft². Additional features include intuitive color-coding on parts that users interact with most, iAdapt® Responsive Navigation Technology, and information button/verbal cues. Read More

Chemical Processing & Waste Management

Gas Scrubber offers ultra high efficiency gas absorption.

September 25, 2013

Designed to handle capacities from 500–250,000 acfm, RotaBed Fluidized Bed Scrubber features swirl induced Coriolis grid that achieves fluidized bed stability, resulting in efficient gas mixing and transfer. Turbulent, plug-resistant mass transfer bed is up to 99% open in fluid contact scrubbing zone, delivering gas absorption and particulate collection of over 99% on most applications. Two stage chevron mist eliminator ensures complete droplet removal from gas exiting scrubber. Read More

Chemical Processing & Waste Management, HVAC

Coastal Technologies Provides Steam Separator/Scrubbers for New Zealand's Te Mihi Power Station

September 13, 2013

Hampton, SC — Coastal Technologies, Inc. (CTI), a worldwide provider of high-quality industrial mist eliminators, coalescors, and separation solutions, has supplied six steam separator/scrubbers to the Te Mihi Power Station in New Zealand. The two-unit, 166-megawatt geothermal plant, currently undergoing commissioning, is located in New... Read More

Chemical Processing & Waste Management, Cleaning Products & Equipment, HVAC, Thermal & Heating Equipment

All American Portable Air Meets Increased Demand for Air Scrubbers and Dehumidifiers with New Inventory

September 5, 2013

Orlando, FL — All American Portable Air today announced it has increased its inventory of dehumidifiers and air scrubbers to meet the demand for dehumidification and humidity stabilization in construction, remodeling projects and disaster drying. The portable equipment speeds up the drying time and stabilizes the humidity levels during... Read More