Chemicals & Chemical Processing ->
(Showing headlines 1 - 20) more ....
Straight Cutting Torch features unique gas mixing design.
ESAB Welding & Cutting Products
Florence, SC 29501
Mar 20, 2014
Working with multiple fuel gas types, Oxweld® SCT-1500 TR features Elite Series Universal Swirl Injector, which swirls high-pressure oxygen streams to create homogenous mix of gas, minimizing potential for flashback. Swirling of oxygen and fuel gas produces pump-like action that forms vacuum in torch to optimize performance with long hoses and lower-pressure operations. Featuring 3-tube, in-line design, torch can cut up to 10 in. with acetylene and up to 12 in. with alternate fuel gases.
Headspace Samplers provide volatile compound analyses.
Columbia, MD 21046
Dec 05, 2013
Offering repeatability through precise control of gas flow rates, HS-20 Series includes Loop model for traditional static headspace methods, and Trap model, which adds dynamic headspace technique for applications requiring greater sensitivity. Units hold up to 90 sample vials and can accommodate both 10 and 20 mL headspace vials within same sequence without special attachments. To save on electricity and carrier gas, automated shutdown feature switches system to standby at end of sequence.
Compact Blowdown Evaporators are digitally controlled.
Organomation Associates, Inc.
Berlin, MA 01503
Dec 03, 2013
Single and triple position MICROVAP microplate evaporators concentrate samples held within 96 well plates (deep well and micro well), while 15- and 24-position MICROVAP laboratory evaporators suit such small batch solvent evaporation applications as concentration of sample batches in microcentrifuge tubes. Model diversity and digital controls provide flexibility for sample preparation applications of different kinds.
TEM Sample Preparation Workflow promotes high throughput.
Hillsboro, OR 97124
Nov 06, 2013
Suitable for use in transmission electron microscopy (TEM) analysis, ExSolve™ can prepare site-specific, 20 nm thick TEM lamella on whole wafers up to 300 mm dia. Solution can sample many sites per wafer in fully automated process inside fab, and wafer TEM prep (WTP) increases speed of sample preparation. This provides semiconductor and data storage manufacturers with access to data needed to verify and monitor process performance. FOUP handling capability is standard.
Industrial Strength Bags enable safe asbestos containment/dispoal.
Grayling Industries, an ILC Dover Company
Alpharetta, GA 30004
Sep 24, 2013
Used for containing and disposing of asbestos and other waste, industrial strength Durapax bags are full gauge and extruded from resins which lend to strength as well as tear and puncture resistance. Standard sizes are 33 x 50 and 60 x 72 in., and flat or gusseted forms are available depending on size. Meeting all regulations for proper asbestos waste handling and disposal, bags come in clear, yellow, and black polyethylene, with or without asbestos warning printed on bag.
Soil Protein Extraction Kit minimizes impurities.
MO BIO Laboratories, Inc.
Carlsbad, CA 92010
Jul 17, 2013
With NoviPure™ Kit, users can extract extracellular and intracellular microbial protein from wide range of soil types without co-extraction of interfering compounds such as humic substances. Two buffer extraction protocol utilizes bead beating with mixture of glass and ceramic beads to lyse cells while solubilizing protein. Kit is suited for mass spectrometry, 1D and 2D polyacrylamide gel electrophoresis, and other proteomics applications.
Vacuum Insulated Concentrator Tube has 20 mL maximum volume.
Organomation Associates, Inc.
Berlin, MA 01503
Jun 25, 2013
Measuring 119 mm high, vacuum insulated concentrator tube features 0.2–20 mL end point volume and graduated insulated tip. Unit includes 19/22 ground glass joint, allowing use with any standard 250 ml, 500 ml, or 1 L Kuderna-Danish flask. When used in S-EVAP and ROT-X-TRACT systems, concentrator tubes are arranged in rotary set in water bath that allows access to all samples from front of instrument.
Sample Conditioning Module provides accurate process control.
Perma Pure Inc.
Toms River, NJ 08754
May 28, 2013
To produce dry, clean, and cool sample, GM-1024 Indi-GASS continuously removes water and particulates from sample stream without altering concentrations of typical analyte gases. Inputs to system are gas sample, compressed air, and electrical power. Continuous, self-regenerating drying process does not require any routine maintenance, and unit can be configured to condition sample streams with flow rates up to 5 Lpm and water content up to 40%.
Epoxy Crack Injection System provides efficient repair solution.
Adhesives Technology Corp.
Pompano Beach, FL 33064
May 23, 2013
Epoxy Crack Injection System includes Crackbond LR321, Crackbond SLV302, or Crackbond LR321G resins, depending on required viscocity, plus Miracle Bond capping paste and port system. It has latex storage pod, delivering constant pressure for automated injection, which holds up to 1.4 oz of resin. Product's leak control valve keeps resin in and allows air and water to escape. Mounting base, and checking window for installer to view and confirm flow of resin, is also included.
Formulation Processing System is based on AFA technology.
Woburn, MA 01801
May 03, 2013
Able to process sample volumes from microliters to liters with true continuous flow process, FS220-M supports scaling of such application areas as nanosuspensions, liposomes, and emulsions from early Discovery phase work to First-In-Human studies. Along with non-contact, isothermal Adaptive Focused Acoustics (AFA) process, system incorporates dissolved oxygen monitoring and thermal design that offer processing capability required for Formulation and novel Drug Delivery systems.
Sample Prep Equipment is available for QuEChERS method.
SPEX SamplePrep, LLC
Metuchen, NJ 08840
Jan 03, 2013
Designed to simplify safe and effective QuEChERS Sample Preparation, 1500 ShaQer™ agitates up to 6 samples simultaneously (compared to 2 by hand). Vertical clamp movement optimizes extraction, and there is no variation in agitating process. This ensures equal extraction conditions for all samples. Unit is also capable of accommodating various tube sizes and shapes.
Chemical Injector supports flow rates up to 40 gpm.
Dosatron International Inc.
Clearwater, FL 33765 1201
Oct 25, 2012
Featuring chemical resistant housing and UV resistance, Model D8RE2 can accurately inject caustic chemicals with flow rate of 2.2–40 gpm, injection ratio of 1:500–1:50, and pressure range of 2–110 psi. Unit includes built-in air bleed, adjustable injection rates, graduated scales, and optional bypass.
Conditioning System accelerates oxygen permeation testing.
Minneapolis, MN 55428
Oct 19, 2012
Developed for use with OX-TRAN® Model 2/61 Oxygen Permeation Test System, RACK-6™ offers separate 6-cell conditioning unit which enables flexible or rigid packages to be brought to equilibrium offline before moving them to OX-TRAN Model 2/61 for final test results. Container Transfer Units allow individual package transfer from conditioning unit to testing unit. Supplied with 12 CTUs, RACK-6 system allows for 6 samples to be conditioned while 6 samples are tested on OX-TRAN Model 2/61.
Disposable Pen Injector targets outpatient community.
Franklin Lakes, NJ 07417
Oct 19, 2012
Accommodating trends where patient care shifts to out-patient setting, BD Vystra™ Disposable Pen is designed for use with range of therapies that require frequent, low-volume or variable dosing injections. Self-injection pen, optimized for usability, comfort, and reliability, provides such features as multi-dosing, dose dialing and correction with audible clicks, as well as large and clear dose markings.
Biological Material Bags feature secure seals, crack resistance.
National Vinyl Products, Inc.
Sainte Genevieve, MO 63670
Oct 15, 2012
Constructed of flexible 12-gauge clear PVC with secure zip-lock seals, Bio Bags help laboratories, medical offices, hospitals, and research facilities safely store and transport biological materials. Tear- and break-resistant construction prevents leaks and discharge of materials, while cold crack additive treatment allows transport and storage in cold environments. Bags are offered in custom sizes and can be made to exact specifications.
Forensics Kit accelerates sample analysis.
Life Technologies Corp.
Carlsbad, CA 92008
Oct 05, 2012
GlobalFiler™ Express features 24 genetic markers, optimizing ability to recover information from forensic samples. Designed solely for forensic or paternity use, DNA kit increases discrimination power by up to 9 orders of magnitude to accelerate comparisons of forensic data and resolve crimes. Portfolio includes GlobalFiler Express kit for reference sample processing and GlobalFiler kit for casework evidence. Proprietary chemistry enables 48 samples to be processed in under 2 hr.
Sample Preparation System delivers all-in-one functionality.
Kansas City, MO 64132 2696
Aug 15, 2012
CentriVap Complete houses every component needed to begin processing multiple samples in diverse laboratory applications. Concentrator and -50°C Cold Trap, both standard components, help protect vacuum pump from corrosive effects of vapors and fumes as they evaporate from samples. Other features include aluminum rotor that holds up to 40 microcentrifuge tubes and 108, 12-13 mm tubes; chemical-resistant diaphragm pump; and CentriZap(TM) Strobe Light.
Open Platform Gene Sampling Chips suit SmartChip System.
Wafergen Bio-Systems, Inc.
Fremont, CA 94538
Jul 20, 2012
MyDesign enables users to dispense assays in variety of configurations to minimize experiment design time. System also makes possible accurate high-throughput qPCR gene expression and single nucleotide polymorphism (SNP) genotyping projects. It is intended for use with SmartChip Real-Time PCR System that allows profiling and validating of molecular biomarkers, microRNA and mRNA gene expression profiling, and SNP genotyping.
Immunoaffinity Column detects deoxynivalenol and nivalenol.
Milford, MA 01757
Jul 12, 2012
Optimizing laboratory analysis of mycotoxins, DON-NIV(TM) WB Immunoaffinity (IA) column simultaneously screens for deoxynivalenol (DON) and nivalenol (NIV), trichothecene mycotoxins produced by fusarium molds. System also features liquid chromatography analysis, to recover most DON and NIV, and maximizes productivity of research laboratories. It uses monoclonal antibody technology for sample preparation. Column also meets EU regulations for recovery of DON in human food and livestock feeds.
Pre-Analytical System automates sample management in labs.
Indianapolis, IN 46256
Jul 09, 2012
Capable of throughput rates up to 450 tubes/hr, cobas p 312 pre-analytical system performs sample registration, sorting, decapping, and archiving of all sample tubes - chemistry, immunoassay, hematology, coagulation, urinalysis - for entire laboratory (including non-Roche equipment). This stand-alone, front-end automation system offers vendor-neutral sample management for labs with limited floor space.
(Showing headlines 1 - 20) more ....
Latest Products in the News
HBC-radiomatic - April 18, 2014
quadrix Ex: High-Quality Handheld Radio Control Now Certified According to NEC 500 / 505
Gems Sensors Inc. - April 17, 2014
Simplifying the Search for the Perfect Fluid Sensor
Matrix Packaging Machinery - April 17, 2014
Matrix Brings Its Robust Cheese Bagging Machine and Pre-Made Pouch Filler/Sealer to the International Cheese Technology Expo, April 23-24 in Milwaukee
Murata Machinery USA/Machine Tool Div. - April 16, 2014
Murata Machinery USA's Fiber Laser Takes Laser Processing to the Cutting Edge of Technology
Schaffner EMC, Inc. - April 16, 2014
"iF Product Design Award" 2014 for Schaffner IEC Inlet Filters
American Empire Manufacturing - April 16, 2014
American Empire Manufacturing Enhances Contract Filling Capabilities, Adds ISO 8/Class 100K Clean Room
Cal Quality Electronics, Inc. - April 16, 2014
Cal Quality Electronics Contracts with Boeing to Support the Combat Survivor Evader Locater (CSEL) Program
Saint-Gobain Performance Plastics, Omniseal - April 16, 2014
Saint-Gobain Seals' Rulon® 1439 Material Certified as USP Class VI Compliant, Further Meeting Needs of Medical Device and Pharmaceutical Processing
Nora Lighting - April 16, 2014
REVO, First Motorized Track Head, Available from Nora Lighting
MJS Packaging - April 16, 2014
MJS Packaging Customizes Jar for Household Products
More Products in the News...