DSM Functional Coatings    Urmond 6129 EL  Netherlands
Apr 16, 2012 Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete protects concrete against mechanical abuse and heavy traffic, as well as extreme conditions such as thermal shock associated with hot water discharge. Three-component urethane cement system, offering resistance to wide range of cleaning and processing chemicals, is suited for pharmaceutical and food/beverage applications.

DSM Functional Coatings    Urmond 6129 EL  Netherlands
Feb 15, 2012 Designed to withstand excessive physical impact, thermal shock, and chemical exposure, URelle(TM)-Crete is suited for pharmaceutical and food/beverage facilities. Three-component urethane cement system protects concrete against mechanical abuse and heavy traffic. Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete meets USDA/FDA standards, and is suitable for exposure to wet processing and steam cleaning.

Epoxies Etc.    Cranston, RI 02921-3407
Mar 22, 2010 Providing ABS-like feel and appearance, Mercury-free Type 70-2170 urethane casting resin does not contain TDI or MbOCA, and cures rapidly at room temperature. Low shrinkage and low viscosity properties allow for production of dimensionally stable precision parts. Resin is designed for product development and low volume manufacturing.

Sherwin-Williams    Cleveland, OH 44115
Jan 14, 2010 With low temperature cure at 20ºF and application in conditions up to 85% relative humidity, Cor-Cote HB Urethane provides 4 hr return to service and can be applied on concrete, as well as steel substrates. Reinforced with micaceous iron oxide, it delivers high abrasion resistance, film integrity, and edge retention qualities. Product is suited for municipal and industrial wastewater treatment facilities, including clarifiers, settling tanks, wet wells, and grit chambers.

DriTac Flooring Products, LLC    Clifton, NJ 07012
Jul 15, 2009 Designed for installation of hardwood flooring, DriTac 1001 All-In-One combines concrete moisture control system, sound control system, and crack suppressant in one product. One-component, moisture-cure urethane is low in odor, contains no water, and provides tenacious, permanent bond. Approved for use with on-grade, or above-grade concrete substrates and plywood subfloors, product offers zero VOCs and zero solvents and helps to contribute to LEED point qualifications.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Jan 06, 2009 Suited for formulating industrial water-based coatings, SF18(TM) and SF26(TM) solvent-free translucent aliphatic waterborne urethane resins offer hardness, high gloss, and chemical and abrasion resistance properties. Single-component, ultra-low VOC products help formulate non-yellowing floor coatings, which have appearance of solvent-borne coatings and can be applied with no odor.

Enviroline Group (IECC)    Pompano Beach, FL 33069
May 13, 2008 Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors.

TENNANT    Minneapolis, MN 55426
Mar 13, 2008 With VOCs below 250 g/L, WearGuard - CRU(TM) 250 Topcoats meet VOC requirements of LADCO, OTC, and Chemicals Control Branch of Environment Canada. Products offer UV light stability, light reflectivity, and ability to withstand Skydrol®, jet fuels, and other industrial chemicals. Available in white, light gray, and gray, coatings come in 100% aliphatic, non-yellowing formula to maintain appearance over time.

Techspray Inc.    Amarillo, TX 79107
Nov 21, 2007 Licron Crystal(TM) is permanent static dissipative coating that adheres to metal and plastic surfaces, operates from 0-100% humidity, and maintains 107-109 W resistivity. It can convert standard bumpers, bins, tools, and other surfaces into ESD-safe products. Applications include electronic assembly work stations, bins, carts, and trays, packaging for sensitive components, production conveyors and bumpers, and static protection for electronic devices.

Garon Products, Inc.    Wall, NJ 07719 1924
Oct 11, 2007 Applied by roller, MORTARTHANE(TM) SL is self-leveling, durable floor topping that withstands repeated exposure to hot oil or steam without pitting or cracking. It is packaged in premeasured components in 5 gal unit covering 32 sq ft at 3/16 in. deep. MORTARTHANE(TM) HF is trowel-applied and packaged in 5 gal units covering 18 sq ft at ¼ in. deep. Both thermal shock-resistant resurfacers meet USDA, FDA, and OSHA standards.

Sherwin-Williams    Cleveland, OH 44115
Oct 09, 2007 Providing lasting color and gloss retention, FluoroKem Fluoropolymer Urethane Finish is graffiti, chemical, and abrasion resistant, and meets AWWA performance standards. Product has VOCs less than 340 g/l and can be applied by brush, roll, or spray to primed steel, galvanized steel, or aluminum. Applications include convention centers, water tanks, casinos, and other highly visible areas.

Hexis USA LLC    Corona, CA 92880
Aug 07, 2007 Available in 48 in. x 65 ft rolls, Carprotect transparent 5.9 mil film with shockproofing properties protects vehicle paintwork against environmental aggressions. It protects vehicle bodywork, doorsills, bumpers, headlights, and wing mirrors against damage from stone chips. Film resists carwash brushes, high-pressure steam cleaners, abrasion, friction, exposure to sunlight, and petrol spillage. Adhesive formulation allows clean removal of film without leaving adhesive residues.

TENNANT    Minneapolis, MN 55426
Mar 16, 2007 Addressing needs within food and beverage plants, Eco-CWO minimizes odors and food borne illnesses caused by bacterial growth. One-coat, seamless coating provides resistance to thermal shock, chemicals, and slips. Water-borne urethane is virtually odor-free and contains no VOCs. Offering UV light resistance, Eco-URE epoxy coating can be used to prime, build, or topcoat flake or quartz flooring. It is suited for automotive showrooms, retail aisles and lobbies, and education classrooms.

Valspar Corp., The    Wheeling, IL 60090
Feb 22, 2007 Combining chemical resistance and UV stability, CRU-340 features mixed VOC of less than 340 g/L, making it compliant in all OTC states. High-gloss formula provides UV light resistance as well as abrasion resistance, critical for high-traffic flooring. Available in clear or pigmented finish, coating is suited for new and existing concrete floors in industrial, aviation, institutional, and commercial operations. It allows for recoat in 12 hr and light foot traffic in 24 hr.

New England Urethane, Inc.    North Haven, CT 06473
Feb 19, 2007 Supplied in clear-to-transparent pellets, Neusoft® Urethane Blend is used to produce soft feel and touch in medical, consumer, and industrial products. Material, which is offered in Shore A hardnesses of 50, 60, and 70, can be injection molded, extruded, or blow molded. It covers range of applications, including those requiring films, and supports integration of various additives or fillers to meet unique application requirements.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Jun 15, 2006 Corothane® I Moisture Cure Coatings can be matched to wide range of colors in large and small batches. They include topcoats and zinc-rich primers that are designed for temperatures down to 20°F or high humidity applications. Providing abrasion and chemical resistance, single-component, VOC-compliant coatings are suitable for water tanks, clarifiers, and secondary containment.

Rogers Corporation    Rogers, CT 06263 0188
Feb 21, 2006 PORON® Soft Seal foam, a formulation of microcellular urethane, is designed for gap filling within sensitive electronic enclosures such as LCDs in cell phones or integrated media players. Product conformability allows LCD panel gaskets to adjust to varying contours and gap thicknesses, while still providing tight seal under harsh conditions. PET supported foam has density of 6.5 pcf and is available in 1 mm thickness.

Rust-Oleum Corp.    Vernon Hills, IL 60061
Jan 18, 2006 Thermakrete(TM) urethane coating shields industrial floors against thermal shock in -10 to +240°F temperature range. Capable of seamlessly expanding and contracting to resist cracking, it withstands caustic washdowns, heavy traffic, abrasion, chemicals, and standing water contamination. Each 3-component kit cures in less than 72 hr without need for primer or sealers. Available in 3/16 or ¼ in. thicknesses, it can be used in USDA facilities based on FSIS Directive 11,000.4.

Mearthane Products Corp.    Cranston, RI 02921
Jan 11, 2006 Chemically blown cellular foam, Durethane F features closed cell structure and is used for banking equipment conveyor belts to bridge gaps between rollers. Mechanically mixed, microcellular Durethane M features uniform, mostly open cell structure. Solid elastomer Durethane S provides heat dissipation and resistance to wear in paper-handling and transport applications. Materials are self-cleaning, provide precision of movement, and are customizable for conductive properties.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Jun 08, 2005 HYDROGLOSS(TM) Single-Component Urethane Coating is formulated to provide high-gloss finish with interior and exterior color and gloss retention. It is ready to brush, roll, or spray without adding and mixing additional components. With VOC content of 250 g/l, low odor formulation is recommended for water tanks, power plants, amusement parks, bridge and highway construction, and for corporate logos and petrochemical plants.