Teknor Apex Co.    Pawtucket, RI 02861
Mar 01, 2013 Exhibiting brittle points of -60°C or lower, Flexalloy® 9611-76 and 9612-75 provide oil resistance, flame retardance, and wide range of operating temperatures required in such applications as control and instrumentation cable (Type CIC), tray cables (TC), and specialty power cords like those for charging electric vehicles. Jacketing materials offer flexibility at low temperatures, making them suited for use in petrochemical, pulp and paper, steel, cement, and mining industries.

Teknor Apex Co.    Pawtucket, RI 02861
Sep 07, 2012 Available with thicknesses from 0.006-0.020 in., widths up to 60 in., and slitting down to 2.0 in., MF-165-J3R-79NT film grade incorporates non-phthalate citrate plasticizer that is stable in applications sterilized by gamma irradiation. Properties of this citrate-based film include Shore A hardness of 81, specific gravity of 1.25, tensile strength of 2,700 psi, and elongation of 300%.

Teknor Apex Co.    Pawtucket, RI 02861
Feb 21, 2012 Featuring petrochemical content of 35% or less, BioVinyl(TM) Flexible Vinyl Compounds incorporate phthalate-free DOW ECOLIBRIUM(TM) Bio-Based Plasticizers, which are manufactured using plant byproducts and can help minimize greenhouse gas emissions. Typical applications include consumer and industrial products, automotive components, certain medical devices, and certain wire and cable uses.

Solutia, Inc.    Saint Louis, MO 63166
Feb 15, 2012 Designed for applications in which rigidity and high glass adhesion are required, Saflex® DG combines glass containment, UV screening, edge stability, and clarity features. Interlayer is suited for use with annealed and heat-strengthened glass, enabling designs with minimized optical distortion and spontaneous breakage, as well as view-through capability after breakage. Specific applications include exposed edge laminates, floors, stairs, balconies, and point glazing systems.

Emco Industrial Plastics, Inc.    Cedar Grove, NJ 07009
Dec 09, 2011 Boltaron® sheet serves such industries and applications as aerospace, mass transportation, general thermoforming, corrosion resistant components, and wall protection. Specifically, aircraft-rated Boltaron 4330/9815E meet FAA requirements for flame, heat release, and smoke generation. Specialized grade, Boltaron® 4335, suits commercial/industrial thermoformed and fabricated parts. Also, there are 7 specialized grades of PVC/alloy for Rail and Mass Transit interior applications.

Solutia, Inc.    Saint Louis, MO 63166
Oct 06, 2011 Saflex® S Series Interlayer provides safety benefits of automotive laminated glazing and also absorbs solar heat transmitted through vehicle's glazing. By absorbing IR radiation, product helps reduce air conditioning usage and CO2 emissions as well as improve vehicle fuel economy. Absorbing solutions are signal enabling and compatible with wireless devices. Drop-in windscreen solution can also promote benefit current and new internal combustion vehicle models.

Tekni-Plex, Inc.    Somerville, NJ 08876
Sep 29, 2011 Suited for pharmaceutical and nutraceutical applications, ALU-LOOK(TM) blister films provide option to cold-form foil and aluminum strip packaging. Product can be used as mono film and primary application is for laminations to PCTFE films. In addition to moisture barrier properties, pharmaceutical grade PVC film runs on standard thermoforming equipment, protects against UV and visible light, and mimics visual characteristics of cold-form foil.

Teknor Apex Co.    Pawtucket, RI 02861
Jun 24, 2011 Apex® rigid vinyl compounds can be custom tailored for specific applications. Meeting needs of various end uses as well as codes and standards requirements, compounds are available in natural, clear, and custom colors. Products include, but are not limited to, profile and sheet extrusion grades for interior and exterior applications, injection molding compounds, and formulations for injection and extrusion blow molding. Specific special formulations are also available.

Teknor Apex Co.    Pawtucket, RI 02861
Feb 28, 2011 Suited for injection molding small- to medium-sizes parts, Apex® RM 8002 and RM 8004 optimize thermal stability in potable water applications requiring NSF-61 certification. Materials offer impact resistance and help lengthen processing uptime between mold cleanings. Available in black, white, and colors, compounds are recommended for valves, housings, fittings, couplings, and connectors used in potable water fixtures, water coolers, beverage dispensers, and irrigation systems.

Solutia, Inc.    Saint Louis, MO 63166
Oct 06, 2010 In addition to providing safety of laminated automotive glazing, Saflex® S Series helps HVAC engineers control interior temperature of vehicle. Interlayer technology absorbs infrared radiation rather than reflecting it, providing solution for hybrid electric and pure electric vehicle applications. By cutting cabin heat, Saflex S enables use of smaller air conditioning systems and allows electric vehicles to maximize driving range for each charge.

Solutia, Inc.    Saint Louis, MO 63166
Oct 20, 2009 With light transmittance level of 0%, Vanceva Absolute Black adds privacy and balance to interior and exterior laminated glass applications. Opaque PVB-based interlayer can be used as single layer in glass laminate or combined with colored interlayers. Applications range from residential doors, side-lites, and transoms to kitchens and baths, partitions, and conference rooms.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
May 11, 2009 Designed to meet needs of thin-film solar power generation, DuPont(TM) PV5200 Series assures glass adhesion with optimal visible light transmission. Clear, pliable material is available in thicknesses from 15-45 mils, and is suited for module encapsulation using nip-roll/autoclave and vacuum laminating.

Walton Plastics, Inc.    Walton Hills, OH 44146
Sep 29, 2008 Suitable for use in outside weathering applications, Walplax 200 high temperature vinyl compound can be colored in dark colors, such as green, blue, black, without loss of physical properties. Thermoforming can be done on traditional tooling designed for vinyl use. Target uses include storage pods, exterior shutters and trim, siding, and material wrapping.

ALECO    Muscle Shoals, AL 35661
May 19, 2008 Available in 3 styles, TearAway(TM) PVC strips provide easy-to-install system that does not use nuts and bolts allowing for quick, convenient installation and replacement of worn strips. TearAway Quick Strips come in partial roll of pre-punched material perforated in 7, 8, 10, 12, or 14 ft lengths. Perforated and pre-punched to custom length, TearAway Custom Bulk Roll is continuous roll of stripping material, while TearAway Replacement Strips are available as defined length of stripping material.

Teknor Apex Co.    Pawtucket, RI 02861
May 12, 2008 Supplied on custom basis, low-VOC versions of Apex® vinyl compounds are designed for use in profiles and molded items, extrusion coated fabrics, as well as extruded and calendered sheet used in residential and institutional furniture and furnishings. Formulations help manufacturers achieve certification under voluntary air-quality standards developed by industry groups, which are used as reference by green building guideline organizations such as USGBC and LEED.

KAPCO (Kent Adhesive Products Co.)    Kent, OH 44240
Feb 11, 2008 Available in 24 in. x 48 in. x 75 ft size, PSA 3 mil Metalized PVC features solvent printable surface and permanent clear adhesive suited for trade show graphics, signs, and point-of-purchase displays. Product is outdoor durable for up to 3 years without lamination and 5 years unprinted. Finishes include smooth or brushed silver and gold, carbon fiber silver, and diamond plate.

Creative Film Corp.    Lakewood, NJ 08701
Aug 22, 2007 Made from non-burning, self-extinguishing PVC resins, Polychrome(TM) Texturized yields look of brushed metal in high-polish, top surface smooth film. Film is offered in silver, gold, brass, and gun metal with choice of fine stainless brush effect or embossed brush effect. Primarily used as packaging and display film, product is adaptable for use in signage, labeling, and decor. Secondsurface manufacturing process yields customizable, print-ready surface.

Solutia, Inc.    Saint Louis, MO 63166
Jun 11, 2007 Available in several offerings, including Clear and Gradient Automotive with 32-gauge thickness and 30-gauge unit for side laminates, Saflex® Q series acoustic interlayer enables users to produce laminated, noise-resistant glass. Lightweight unit does not require retooling, and can be used in any vehicle glazing position, including windscreen, sidelites, backlites, and roofs. Addressing noise transmission through vehicle's glass, unit reduces noise by up to 6 dB.

Solutia, Inc., Therminol Div.    St. Louis, MO 63166 6760
Mar 01, 2007 Used in automotive design, Saflex® polyvinyl butyral (PVB) glass interlayer solutions promote color, acoustic, and solar properties when sandwiched between 2 pieces of glass. Saflex Q series advanced acoustic interlayer has 3 layers of PVB, and Saflex interlayer for head-up-display (HUD) adds crystal-clear image on vehicle's windscreen that eliminates distracting image ghosting. Also available, solar color interlayer combines aesthetics, UV protection of 50 SPF, and heat reduction.

Hexis USA LLC    Corona, CA 92880
Dec 08, 2006 Available on transparent polyester liner, Model PC50MICP2 optically clear gloss PVC film is 1.2 mil thin. Clear cast laminate is offered in roll sizes measuring 1,370 mm wide by 98.5 ft long and is highly conformable and insensitive to humidity changes. Installation is facilitated by film's stay-flat stability.