Polyolefin Compounds

Chemical Processing & Waste Management, Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Dual Wall Heat Shrink Tubing meets UL VW-1 test requirement.

September 29, 2015

Rated for UL VW-1 flammability test specified by UL 224 standard, DWFR (dual wall, fire-retardant) heat shrink tubing comes in 14 sizes from 3–52 mm ID and is applicable to range of electrical connections and terminations. Flame-retardant polyolefin jacket and thermoplastic inner adhesive wall provide electrical insulation and mechanical protection. When properly installed, tubing shrinks to create moisture-resistant seal. Heat shrink ratios of 3:1 and 4:1 enable diverse use. Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems

Dual Wall Heat Shrink Tubing meets flammability requirements.

September 24, 2015

Rated for UL VW-1 flammability test specified by UL 224 standard, DWFR Heat Shrink Tubing features flame retardant polyolefin jacket and thermoplastic inner adhesive wall that provide electrical insulation and mechanical protection. When properly installed, tubing shrinks to create moisture-resistant seal. Available in 14 sizes from 3–52 mm ID, tubing offers heat shrink ratios of 3:1 or 4:1. All sizes provide full recovery at 125°C and can be used across operating temperatures of -40 to 110°C. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Shrink Film exhibits optimal machinability.

July 25, 2014

Offering alternative to standard, heavier gauge films without sacrificing performance and protection, ExlfilmPlus® GPL cross-linked polyolefin shrink film features high-speed processing capabilities. Film is available in center-fold or single-wound put-ups, pre-perforated, and extended length rolls. Product is suitable for printers, bakeries, food processors, cosmetic manufacturers, and software producers looking to protect or unitize products in clear, thin gauge film. Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Custom Fluoropolymer Tubing serves multiple industries.

August 13, 2013

Available to be manufactured for custom critical applications, Heat Shrinkable Fluoropolymer FEP, PFA, and PTFE tubing serves as key element in applications for aerospace, medical, chemical processing, electrical, as well as semi-conductor industries. Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems

Heat Shrink Tubing offers 2:1 and 3:1 shrink ratios.

February 28, 2013

Made of crosslinked polyolefin, HST Series protects inline components, disconnect terminals, and splices. Products are UL approved, RoHS-compliant, and available in variety of pre-cut lengths as well as mini and standard roll lengths. Six color options facilitate coding of wires, cables, terminals, and components. To provide both insulation and sealing on applications such as wire splices and harnesses, product family also includes 3:1 adhesive-lined heat shrink tubing. Read More

Chemical Processing & Waste Management, Materials & Material Processing

High-Shrink Polyolefin Label Films deliver high yields.

March 15, 2012

Targeting bottle applications, 3-layer polyolefin shrink label films are composed of linear low-density polyethylene and TOPAS® cyclic olefin copolymer (COC). TOPAS COC resin acts as enabling technology, enhancing shrink and gloss while providing sustainability. These recyclable, low density films are separated from PET bottles via standard water flotation recycling systems. Film exhibit 40%-60% machine direction shrink at 100°C and 0%-2% growth in cross/transverse direction at 100°C. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Polyolefins serve as compatibilizers in polymer compounding.

February 1, 2012

Designed to minimize interfacial forces between polymers and polymer fillers, Maleic Anhydride-Modified Polyolefins optimize adhesion within composite, while facilitating uniform dispersion and stable morphologies. EK-10-MAH is recommended for coupling of glass and other fillers in polypropylene composites, while KK-10-MAH is suited for coupling of glass, wood pulp, and other fillers in HDPE composites. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Materials & Material Processing

Protective Films temporarily protect gloss finished surfaces.

August 5, 2011

Featuring slight difference in adhesion strength, Surface Guard® 132 and 133 provide temporary protection of painted metals and plastics. Both feature polyolefin film coated with water-based acrylic adhesive system, and exhibit low adhesion build over time when used with stainless steel, polycarbonate, acrylic, painted metal, and bright aluminum surfaces. When protection is no longer needed, products are removed with quick release. Sizes range from 1-80 in. W in roll lengths up to 15,000 ft. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Materials & Material Processing

Protective Films adhere to semi-matte, textured metals/plastics.

January 26, 2011

Surface Guard® 135 series provides temporary protection of textured or semi-matte finished metals and plastics. Coated with water-based acrylic adhesive system, polyolefin film adheres to surface, exhibits low adhesion build over time, and can be removed when protection is no longer required. Products are supplied on 1.5 mil Linear Low Density or 2.5 mil Low Density PE films; clear and tinted films are also available. Widths from 1-80 in. and roll lengths to 15,000 ft are available. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Protective Film safeguards high gloss and lightly textured surfaces.

December 10, 2010

Surface Guard® 123 series provides temporary protection for variety of surfaces, including smooth and lightly textured types, during processing, assembly, and shipping. Polyolefin film is coated with blend of aqueous adhesives, and its properties enable hybrid masking capable of handling water/condensation, heat, and high surface energy. Typically supplied on 1.5-3 mil PE films, with clear and tinted films available, product comes in lengths to 15,000 ft and widths from 1-80 in. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Materials & Material Processing

White Masking Film provides scratch protection.

November 11, 2010

Available in widths from ¼-52 in., PBWMF-4 Masking Film consists of 3.0 mil polyolefin film coated with removable acrylic adhesive, suitable for protecting glass, auto trim, clear-coated aluminum, and other highly polished finishes. Adhesive does not build over time and will remove cleanly from most surfaces up to 1 year after deployment. Adhesive delivers cling-like, low initial grab, which allows for clean repositioning while providing environmental resistance from -20 to 150°F. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Materials & Material Processing

Protective Film suits specially coated plastics and countertops.

November 1, 2010

Featuring polyolefin film coated with aqueous-based acrylic adhesive, Surface Guard® 112 Series provides surface protection during processing, assembly, and shipping while enabling removal when no longer needed. Product is moisture-resistant and adheres to UV, AR, and anti-scratch coated plastics, such as acrylics, PC and PET, and countertops. Available in widths from 1-80 in. and lengths up to 15,000 ft, film can be printed with brand identity or technical information. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Materials & Material Processing

Surface Protection Films suit high gloss applications.

October 29, 2010

Featuring polyolefin film coated with aqueous-based acrylic adhesive system, Surface Guard® 69 Series has low initial tack that allows masking to be repositioned after first contact. Products offer high adhesion build over time, water resistance, and optimal shear with clean peel. Available in widths from 1-80 in. and lengths up to 15,000 ft, films provide surface protection during processing, assembly, and shipping while enabling removal when no longer needed. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Materials & Material Processing

Removable Films temporarily protect variety of surfaces.

October 15, 2010

Featuring polyolefin film coated with SUR-Guard adhesive system, Surface Guard® 96 Series exhibits medium to low peel values that remain stable over time. Removable and repositionable films can protect variety of surfaces including flat painted walls and textured surfaces, as well as smooth and glossy surface types. Typically supplied on 1.5-8 mil polyethylene films, Surface Guard® 96 Series is available in widths from 1-80 in. and lengths up to 15,000 ft. Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems

Heat Shrinkable Tubing protects and insulates cable.

February 21, 2008

With 20 different tubing and sleeving options in variety of sizes, colors, and lengths, OLFLEX® tubing and cable management solutions suit virtually any application or environment. Products offer insulation as well as chemical and temperature resistance for flexible and non-flexing cable in extreme environments. Offered in shrink ratios of 2:1, 3:1, and 4:1, tubing comes in dual wall, adhesive-lined, permanent bonding, and polyolefin type for liquid tight sealing. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Protective Film is supplied on 2-4 mil polyethylene films.

February 7, 2008

Designed to provide temporary protection of textured or semi-matte finished metals and plastics, Surface Guard(TM) 104/105 series features polyolefin film coated with environmentally friendly, water-based acrylic adhesive system. It suits plastic and metal surfaces which require low to medium adhesion and exhibits low adhesion build over time. Protective film can be supplied in widths from 1-80 in. and in lengths up to 15,000 ft. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Flexible Tubing has halogen-free formulation.

November 29, 2007

Manufactured to dimensional requirements, HF100 polyolefin-based flexible tubing has operating temperature range of -30 to +90°C and is suited for applications in which fire safety is of concern. Recyclable product is flame retardant and emits minimal levels of non-toxic smoke if ignited. Additionally, any gases emitted in event of fire are minimally corrosive. Offered in standard and custom colors, tubing is Pb-free and RoHS-compliant. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Green & Clean

Surface Film protects automobile bodies before delivery.

October 2, 2007

Designed on basis of polyolefins, NOVAGUARD® 9377 protects automobile bodies and parts against external aggressions such as acid rain, bird droppings, and tool marks during assembly, transport, and storage. No treatment of discharges into atmosphere is necessary due to opaque white plastic film's solvent-free adhesive. Offering 9 months of exterior weather resistance, reclaimable/recyclable film is 2.4 mil thick and comes in 656 ft reels in widths from 1.2 in. to 9 ft. Read More

Chemical Processing & Waste Management

Apertured Films are manufactured from TPX methylpentene.

August 6, 2007

Delnet® apertured films are manufactured from TPX(TM), 4-methylpentene-1 based polyolefin, for safe and non-toxic use in medical, food-grade, and other applications requiring heat resistance, transparency, and chemical/hydrolysis resistance. Produced in multiple configurations, TPX has melting point of 460°F and visible light transmittance of 90%. Colorless product features low water absorption (0.01%), and hydrolysis will not cause dimensional changes or physical property deterioration. Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems

Heat Shrink Tubing is offered in multiple variants.

March 27, 2007

Standard wall polyolefin, with 2:1 ratio, is available in 5 colors and used for protecting in-line components and identifying or color coding harness assemblies. Dual Wall adhesive lined polyolefin, with 3:1 ratio, protects electrical and power distribution applications. Medium wall adhesive lined polyolefin, with 3:1 ratio, suits aerial and underground applications, while PVC tubing has 2:1 ratio, comes in 6 colors, and is designed for electrical insulation requirements. Read More