Solvay Advanced Polymers, L.L.C.
Alpharette, GA 30005-3914
Mar 14, 2007 Offering low-permeation barrier material for host of fuel system applications, Ixef® Polyarylamide Plastic can be used in 2-layer system to meet standards of EPA's Partial Zero Emission Vehicle and California Air Resource Board automotive and small off-road engine emission regulations. Resin also maintains mechanical properties in bio-diesel and ethanol-based fuels.

Goodfellow Corp.
Devon, PA 19333
Feb 08, 2007 Supplied as injection-molded plaques (sheets) in sizes from 60-250 mm² and thicknesses from 2.0-10.0 mm, nonstandard grades of various polymers are available in amounts that range from singular pieces to small production quantities. Available grades include polyetherimide, in black or amber; glass-filled Vectra B and polyphenylenesulfide; as well as polyphenylsulfone and polymethylpentene. Other grades include acrylonitrile/methylacrylate copolymer and polybutylene terephthalate.

E-Components & Chains Limited
Pocklington, York YO42 1NR  United Kingdom
Jan 26, 2007 Detectamet Super XM plastic pens help control growth of bacteria, mold, mildew, fungi, and algae in food/pharmaceutical manufacturing and processing environments. Available with and without pocket clip, they are offered in blue, red, green, and yellow housings with choices of blue, black, and red ink. Impact resistant, environmentally friendly, nonretractable pens can be used as part of HACCP.

MacDermid Autotype, Inc
Schaumburg, IL 60173
Oct 30, 2006 Autotex AM has hard-coated, textured surface resistant to scratches, chemicals, and aggressive cleaning agents. Utilizing Microban® antimicrobial protection, which inhibits growth of microbes on contact, it can be used to manufacture fitness equipment, including treadmills, rowing machines, and exercise bikes. Film has flex life suited for tactile membrane keys and other curved surfaces, and is resistant to stress fractures and weak points.

Scapa North America
Windsor, CT 06095
Oct 04, 2006 Unifilm® U797A low fogging acrylic transfer adhesive bonds to low surface energy materials and is formulated for gasketing as well as noise, vibration, and harshness reduction applications. Transfer adhesive is 5 mil thick and is supplied with 83 lb natural polycoated release liner. Offering high tack, quick stick and peel strength, adhesive performs over wide temperature range and is resistant to water, humidity, and chemicals.

Teknor Color Co.
Pawtucket, RI 02861
Sep 07, 2006 TEK Deck Pro(TM) Masterbatch combines color, UV absorber, and biocide to meet color and UV-protection requirements. Masterbatch incorporates pigments whose high infrared reflectance level reduces heat buildup in deck components that can cause polymer degradation. TEK Deck Pro can be used with polyolefin resins as well as rigid and flexible PVC.

ITW Richmond Technology
Somerset, NJ 08873
Jul 31, 2006 Available in pre-made bags or bulk form, 3.2 mil thick Compos-a-vac® 40 provides clean, transparent moisture barrier for sensitive products during transport. It exhibits puncture and tear resistance and is manufactured in clean rooms for sterility. Offered with inside dimensions from 3 x 5 in. to 36 x 24 in., bags exhibit slip and flexibility for packaging machinery adaptability. They also conform to vacuum packaged content contours and adapt for disc media and sputter targets.

Master Bond, Inc.
Hackensack, NJ 07601
Jun 12, 2006 One component, heat curing epoxy adhesive/sealant EP17 cures at temperatures from 300-350°F for 60-90 minutes. Flowable paste has 8,700 psi tensile strength, 387,000 psi tensile modulus, Shore D hardness greater than 90, and compressive strength greater than 13,000 psi. MIL-MMM-A-132 compliant, 100% reactive compound is resistant to chemicals, including fuels and acids, and bonds to metals, glass, ceramics, vulcanized rubbers, and plastics.

GE Company GE Plastics
Pittsfield, MA 01201
Jun 09, 2006 Pigmented for high opacity, White Ultem WH217 ensures bar code labels can be read correctly. Polyetherimide (PEI) film provides print contrast ratio of 98% and is also flame retardant. Suited for electronic applications, product exhibits dimensional stability and meets RoHS standards. Consistent thickness (±10% gauge control at 50 µm) allows even application of label adhesive or clear coatings that may be needed when using certain inks.

IPL Products Ltd.
Worcester, MA 01605
Mar 21, 2006 Square and Rectangular Container line provides space efficient solution for packaging nails and fasteners sold in hardware stores. Made of transparent plastic, containers allow consumers to easily identify product and feature tamper-evident Shure-Lock safety system to protect against shoplifting. Reusable containers are available in 12, 16, 32, and 48 oz, as well as 2 gal sizes.

E-Components & Chains Limited
Pocklington, York YO42 1NR  United Kingdom
Oct 27, 2005 Featuring housings made from impact-resistant/food contact-approved polypropylene material, Anti-Microbial Pens contain additive that inhibits bacteria build-up with protective barrier that reforms even after cleaning. Protection lasts lifetime of product. Pens are available in retractable and non-retractable types with selection of color inks including blue, black, and red.

Tra-Con, Inc.
Bedford, MA 01730
Jul 26, 2005 With 1:1 mix ratio and Shore D hardness of 65, TRA-BOND 2170T suits applications that require chemical fastening to plastic parts. Amber epoxy adhesive bonds nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton, and other thermoplastic substrates. Featuring working life of 2 hr, product and can be cured in 24 hr at room temperature or at accelerated rate in 65°C heat. Industries of use include medical, aerospace, photonic, and automotive.

E-Components & Chains Limited
Pocklington, York YO42 1NR  United Kingdom
Jul 25, 2005 Complete with handle, Detectamet Plastic Cup offers capacity of 400 ml and comes in blue, red, green, and yellow. It is produced from specially formulated material based on high-impact food contact approved polypropylene. Material can be detected and rejected by typical metal detection machines used in food processing industry. Cup is virtually unbreakable and will work in environments ranging from -30 to +80°C.

IMS Company
Chagrin Falls, OH 44023
Jul 13, 2005 Suited for injection, extrusion, and blow molding operations, custom-built IMS SHARXX Line™ Granulators enable users to reclaim and reuse plastic scrap. Products are offered in 10 models and 25 sizes, which include beside-the-press models and central models with light-, medium-, and heavy-duty capacities. Machines process variety of plastics, from sprues/runners and small parts to film and pipe to larger parts, web scraps, and purgings.

Ampacet Corp.
Tarrytown, NY 10591-5130
Jul 01, 2005 High-clarity slip antiblock, Product 102286 eliminates loss in clarity that often accompanies antiblock use by raising film clarity well above that of base resin. Product makes film up to 65% clearer 50% more glossy than base polymer. Mineral-based additive has narrow particle size distribution and spherical particles that have less impact on haze than irregular particles normally found in agents.

Stratasys, Inc.
Minneapolis, MN 55344 2020
May 19, 2005 Combining polycarbonate and ABS plastic, PC-ABS allows manufacturers to predict end-product performance by modeling with same material that end-products are made of. Support material is water-soluble, which permits hands-free removal, shortening modeling process. Material blend's thermal and mechanical properties make it suited for production of parts in automotive, electronic, telecommunications, and toy industries.

Ampac Flexibles
Cary, IL 60013
Apr 28, 2005 Flexi 6818 Lamination features heat-seal coated polyester coupled with metalized, white oriented polypropylene. It is available with 2-sided print and with 100% opacity. Copy on reverse side will not show through front facing and vice versa. Flexi 6818 can be sealed around face of tray, leaving corner exposed to grab and pull for product access. Puncture resistant film will not tear upon opening and is suited for consumer goods and solid or semi-solid products.

Tekni-Plex, Inc.
Somerville, NJ 08876
Apr 12, 2005 CyberShield flexible PVC compound for plenum cable offers low-smoke, low-flame, low-temperature properties. Benefits include flexible durometer of 95 Shore A and temperature flexibility to -30°C. It meets requirements of UL 910 Steiner Tunnel for low-smoke and low-flame properties.

Autotype Americas, Inc.
Schaumburg, IL 60173 3810
Mar 01, 2005 Autotex AM hard-coated film features built-in Microban® antimicrobial protection that inhibits growth of potentially harmful bacteria, mould, and mildew. Film is scratch and chemical resistant and can withstand rigors of every day use as well as aggressive cleaning methods. Autotex AM substrate suits hygiene critical surface applications such as membrane keyboards, fascia panels, wall coverings, and shelf and bench tops.

CYRO Industries
Rockaway, NJ 07866 2120
Jan 21, 2005 Free of material defects, dust, and contaminants, use of ACRYLITE SuPure™ results in visibly pure molded parts. Weatherable product shows no adverse effects to UV light and is offered in different grades for various degrees of heat resistance, flow, and molecular weight. Loaded into woven polymer bulk packaging to ensure product remains free of contaminants during shipping, polymer is suited for optical lenses as well as visual and automotive molding applications.