Solvay Engineered Polymers
Auburn Hills, MI 48326
Nov 06, 2007 Used to bond acrylic layer onto substrate of thermoplastic polyolefin (TPO) for use in thermoforming applications, ADDHERE(TM) tie layer promotes gloss, depth of image, and surface durability. Pelletized material can be co-extruded with TPO substrate, to which acrylic film rollstock can be laminated in-line, or sheet producers can tri-extrude each of 3 materials (acrylic, tie layer, and TPO) from melt phase to produce multi-layer sheet. Product is colorable and recyclable.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Nov 01, 2007 Able to withstand hot shear tests at 150°F for more than 50 hr, ROBOND(TM) Prohesion water-based, pressure sensitive acrylic adhesive is suited for door panels, interior pillars, instrument panels, and ductwork. Humidity resistant product retains more than 80% of its peel after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Bonding agent exhibits anchorage to substrates with both high and low surface energy.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Oct 19, 2007 Designed for pressure-sensitive tapes and other applications traditionally served by solvent-based adhesives, water-based ROBOND(TM) Prohesion withstands hot shear tests at 150°F for more than 50 hr and retains more than 80% of its peel adhesion after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Product adheres aggressively and exhibits optimal anchorage to substrates ranging from high surface energy to low surface energy.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Jul 27, 2007 Avanse(TM) MV-100 waterborne acrylic latex polymer is low VOC emitting emulsion that meets all federal and state VOC regulations in formulated coatings. Formulated to withstand harsh environments associated with industrial coating applications, it is suited for primers, topcoats, and direct-to-metal finishes. Polymer optimizes distribution of pigment within dried film and provides corrosion resistance and durability.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Jun 28, 2007 Aquaset(TM) acrylic thermosetting binders provide building insulation manufacturers with green alternative to formaldehyde in production of fiberglass batting. Water-based acrylic offers sustainable chemistry that is non-combustible, non-hazardous, recyclable, and non-flammable. Stable at room temperature, resins do not require refrigeration. Binders produce only water during curing process and reduce amount of particulates in work environment.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jun 19, 2007 Designed to cure in seconds upon exposure to light in visible spectrum, Loctite® Indigo(TM) 3552 and 3553 feature viscosities of 200 and 3,500 cp, respectively. They are suited for use with UV-blocking clear and select colored substrates including translucent variations of blue, purple, gray, white, and green. Both acrylic adhesives are ISO 10993 biocompatibility tested, offer fluorescence for inspection, and adhere to various plastics including polycarbonate, PVC, and ABS.

National Starch & Chemical Co.
Bridgewater, NJ 08807-0500
Feb 28, 2007 DURO-TAK(R) acrylic solution pressure sensitive adhesive is designed to enable dispersed drug patch formulations. Supplied in non-polar cyclohexane solvent, it is targeted at specific drugs that have low solubility in non-polar solvents, and simplifies preparation of dispersed drug-in-adhesive patches by reducing potential for supersaturation.

National Starch & Chemical Co.
Bridgewater, NJ 08807-0500
Feb 28, 2007 Providing high level of drug solubility for hydrophilic drugs such as nitroglycerin, DURO-TAK® 87-202A is supplied in organic solvent solution. Self-curing, pressure-sensitive adhesive also offer high moisture vapor transmission rate, which contributes to long wear times, especially when used with non-occlusive or semi-occlusive backings.

Lord Corporation
Cary, NC 27511
Jan 30, 2007 With LORD Accelerator 19GB Gray mix-in curative, LORD 400 Series Acrylic Adhesive will bond variety of prepared or unprepared aluminum materials. Accelerator allows precise control of adhesive bondline thickness due to its content of 0.01 in. dia glass beads. Used for cars, trucks, specialty vehicles, and boats, cured adhesive distributes stress, acts as sealant, helps prevent corrosion, and maintains original mill finish of exterior surface of thin panels.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Dec 20, 2006 Acriglas® Neon Lights translucent acrylic sheets are suited for illuminated signs, menu boards, and displays as they maintain color and visual appeal when backlit. Standard matte finish on one side allows for better light diffusion, while glossy reverse side provides shiny appearance. Offered in standard size of 4 x 6 ft, and thickness from 1/8-½ in., customized sheets are available in drilled, routed, laser-cut, glued, formed, hot stamped, and silk-screened options.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Sep 20, 2006 Available in custom configured specifications, Acriglas® Pastel Frost line of acrylic sheets are offered in 23 colors in varying degrees of translucency, with matte texture on one or both sides of sheets. Sheets are suited for use in point of purchase displays, store fixtures, furniture, lighting, and in architectural applications where tempered glass cannot be utilized.

Cortec Corp.
St. Paul, MN 55110
Aug 23, 2006 Organic, water-based VpCI(TM)-386 provides UV-resistance and corrosion protection for equipment, structures, and maintenance needs. It is appropriate for direct metal applications and can be used as single coat system or in conjunction with other primers and topcoats. Suited for indoor or outdoor conditions, non-toxic, low VOC system forms thixotropic coating that is resistant to sagging or running, forming non-flammable protective barrier against corrosive elements.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Jul 24, 2006 Suited for security lighting applications and use with CCD video surveillance cameras, Acriglo® glow-in-the-dark acrylic provides 1 ½-2 hr of illumination without back-up power source during loss of electricity. It charges completely by luminosity emitted during normal operation, and glow emitted from fixture provides lighting capacity equivalent to moonlight. Sheets are available in thicknesses from 1/8-3/8 in. and can be configured to meet specification requirements.

Scapa North America
Windsor, CT 06095
Jul 24, 2006 Supplied with 60 lb kraft release liner, Unifilm® U741 bonds materials such as plastics, Lexan®, ABS, and polypropylene. Aggressive 3 mil acrylic transfer adhesive provides consistent, lasting bond upon lamination and is suited for bonding decals and nameplates. High-tack adhesive, resistant to water and ambient humidity, can also be used for general-purpose product assembly and for laminating to foam for gasketing and NVH applications.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Jun 27, 2006 Acriglas® Glitter Series is offered in solid and virtually unlimited custom blended color formulations. Using custom colored acrylic as base with specified blends of Glitter, designers can create various visual effects. Offered in sizes 4 x 4, 4 x 5, and 4 x 6 ft. with thicknesses from 1/8-½ in., sheets can be drilled, routed, laser cut, glued, formed, hot stamped, and silk-screened. Applications include point of purchase displays, store fixtures, lighting, and signs or lettering.

GE Advanced Materials- Silicones
South Charleston, WV 25303
Jun 12, 2006 Eliminating changes in sheen of paint when applied over caulk or sealant, GE Infinity urethane elastomeric sealant enables users to deliver seamless look when painting. It provides optimal adhesion and elasticity without dirt pick-up or yellowing. Incorporating BioSeal, cured sealant is resistant to mold and mildew growth. GE Infinity is suited for indoor and outdoor applications and cleans up with soap and water.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 10, 2006 Designed for vent channel formation and shell repair, ResinAid 3691(TM) pink one-part acrylic adhesive cures tack-free in less than 20 sec on exposure to UV or visible light of right intensity. In less than 10 sec, this high viscosity product cures to thickness of 0.060 in., making it a suitable alternative to traditional vent formation materials. Using 6 step process, 3691(TM) ResinAid will effectively repair cracked or damaged hearing aid shells.

Scapa North America
Windsor, CT 06095
Apr 24, 2006 Designed to protect flexible printed circuits, Unifilm U801 and U801NP are 5 mil acrylic adhesives that maintain optimal shear properties at temperatures greater than 375°F. U801 is supplied with 64 lb printed polycoated kraft release liner, while U801N features unprinted liner. Products adhere to variety of metals and plastics including polyimide, polyester, and ABS, making them suited for applications involving nameplates, screen printing, and industrial bonding and assembly.

GE Company GE Plastics
Pittsfield, MA 01201
Mar 23, 2006 Consisting of acrylic-styrene-acrylonitrile resin, co-extruded with PVC resin, Geloy offers UV and chemical resistance in outdoor environments, as well as impact resistance in low temperatures. Offered in 4 colors, window profiles made from Geloy retain uniform color and gloss, even when exposed to sunlight, moisture, temperature extremes, chemicals, and environmental pollutants. Thermo-insulating properties make them suitable replacements for aluminum window profiles.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Feb 20, 2006 Offered in 12 standard colors, Acriglas® Marble/Granite Acrylic Sheets can be customized to any color and with varied degrees of translucency. When combined with physical surface texture or matte finish, appearance of honed or mottled stone can be achieved. Formulated to resist long-term exposure to UV, sheets will not fade or change color over time. They are offered in thicknesses from 1/8-½ in. and are suited for point of purchase displays, lighting, signs, and furniture.