Excalibur Paint & Coatings
Wichita Falls, TX 76307
Jul 16, 2008 Meeting performance properties of solvent-borne systems without associated health and safety hazards, Aqua - Thane 2K water-borne coating exhibits abrasion, solvent, and chemical resistance including Skydrol, and maintains hardness. Film build of 4-8 mil wet is achieved without foaming, gassing, or flow problems. HAPS free system offers adhesion to steel, aluminum, galvanized metals (both electroplated and hot-dipped), and various stainless steel, PVC, and carbon/fiberglass composites.

Pres-On Products, Inc.
Addison, IL 60101
Jun 03, 2008 Designed for use by OEMs, FFVSA exhibits optimal grab and holding power when applied to wood, painted surfaces, and plastics. It is .005 in. thick, comes in widths from 3/16-54 in., and resists damage from water, humidity, and UV rays. Offered on 180 yd long standard rolls, product is suited for splicing fabric, film, and foil; laminating nameplates, metal, foams, and fabrics; as well as general-purpose mounting and holding.

Scapa North America
Windsor, CT 06095
May 29, 2008 For structural and decorative use, Unifilm® U802 is used to attach architectural tension membranes to wide array of metal frames. Product laminates to variety of substrates including low surface energy plastics and untreated polyolefins. It provides high initial adhesion and builds to peel strength of 149 oz/in. Able to withstand environmental extremes, acrylic transfer adhesive offers UV, humidity, chemical, and temperature resistance.

Sto Corp.
Atlanta, GA 30336 5609
Apr 30, 2008 Suited for new construction or renovation, StoCreativ® Granite acrylic-based interior and exterior wall finish is trowel-applied and comes in 10 colors. Use of this product, which is compatible with Sto Classic Wall Claddings (including Sto Classic NExT®), helps incorporate natural looks and colors in finished walls.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 18, 2008 Curing tack-free within seconds, Loctite® 3974(TM) permanently bonds materials with differing coefficients of thermal expansion and accommodates substrate expansion/contraction. Single-component acrylic adhesive cures upon exposure to UV or visible light and can be used on glass, thermoplastic, and metal assemblies for medical device bonding, potting, and sealing applications. Characteristics include A70 Shore hardness and 100% elongation.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 03, 2008 Loctite® 331(TM) Structural Adhesive is acid-free, 2-step acrylic that fixtures in 20 sec and develops full strength in 30 min, bonding magnets and metals of all sizes. Designed for filling large gaps, Loctite® 3060(TM) Structural Adhesive is acid-free, 2-component, external-mix acrylic featuring 2 cascading adhesive streams that automatically mix together. Loctite® E-220IC(TM) Hysol® Epoxy Adhesive is acid-free, 1-component epoxy designed for induction cure operations.

Scapa North America
Windsor, CT 06095
Apr 02, 2008 Resistant to heat, chemicals, and plasticizers, Ultrafilm(TM) 6300-001 and 6500-001 are designed for sound attenuation, vibration dampening, rubber extrusion mounting, and general product assembly applications. They bond to various surfaces, including ether and ester foams, rubbers, metals, and engineered plastics, and supplied with 4 mil white HDPE liner. Acrylic adhesive used in Ultrafilm 6300-001 and 6500-001 is, respectively, 3 and 5 mils thick.

Henkel Corp.
Madison Heights, MI 48071
Dec 21, 2007 Based on Hysol PC52 platform, Hysol® PC62 is one component solvent-based acrylic conformal coating that provides environmental and mechanical protection for printed circuit boards (PCBs). UL746 and IPC-CC-830 compliant product can be applied with non-atomized selective spray coating equipment, and is suited for harsh conditions in automotive, military, aerospace, industrial, and consumer avionics applications.

3M Adhesives & Tapes Div.
St. Paul, MN 55144 1000
Dec 06, 2007 Designed to cure to tough plastic in absence of oxygen and in presence of metal, Rite-Lok Anaerobic Adhesives are suited for threadlocking, retaining, gasketing, and sealing. Rite-Lok Cyanoacrylate Adhesives, also known as instant adhesives, are liquid and gel formulations designed to cure in seconds to bond many substrates. Two-step Rite-Lok Structural Acrylic Adhesives can bond different substrates, such as metal to stone, plastic to metal, metal to metal, plastic to plastic.

Solvay Engineered Polymers
Auburn Hills, MI 48326
Nov 06, 2007 Used to bond acrylic layer onto substrate of thermoplastic polyolefin (TPO) for use in thermoforming applications, ADDHERE(TM) tie layer promotes gloss, depth of image, and surface durability. Pelletized material can be co-extruded with TPO substrate, to which acrylic film rollstock can be laminated in-line, or sheet producers can tri-extrude each of 3 materials (acrylic, tie layer, and TPO) from melt phase to produce multi-layer sheet. Product is colorable and recyclable.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Nov 01, 2007 Able to withstand hot shear tests at 150°F for more than 50 hr, ROBOND(TM) Prohesion water-based, pressure sensitive acrylic adhesive is suited for door panels, interior pillars, instrument panels, and ductwork. Humidity resistant product retains more than 80% of its peel after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Bonding agent exhibits anchorage to substrates with both high and low surface energy.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Oct 19, 2007 Designed for pressure-sensitive tapes and other applications traditionally served by solvent-based adhesives, water-based ROBOND(TM) Prohesion withstands hot shear tests at 150°F for more than 50 hr and retains more than 80% of its peel adhesion after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Product adheres aggressively and exhibits optimal anchorage to substrates ranging from high surface energy to low surface energy.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Jul 27, 2007 Avanse(TM) MV-100 waterborne acrylic latex polymer is low VOC emitting emulsion that meets all federal and state VOC regulations in formulated coatings. Formulated to withstand harsh environments associated with industrial coating applications, it is suited for primers, topcoats, and direct-to-metal finishes. Polymer optimizes distribution of pigment within dried film and provides corrosion resistance and durability.

Rohm & Haas Co.
Philadelphia, PA 19106 2399
Jun 28, 2007 Aquaset(TM) acrylic thermosetting binders provide building insulation manufacturers with green alternative to formaldehyde in production of fiberglass batting. Water-based acrylic offers sustainable chemistry that is non-combustible, non-hazardous, recyclable, and non-flammable. Stable at room temperature, resins do not require refrigeration. Binders produce only water during curing process and reduce amount of particulates in work environment.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jun 19, 2007 Designed to cure in seconds upon exposure to light in visible spectrum, Loctite® Indigo(TM) 3552 and 3553 feature viscosities of 200 and 3,500 cp, respectively. They are suited for use with UV-blocking clear and select colored substrates including translucent variations of blue, purple, gray, white, and green. Both acrylic adhesives are ISO 10993 biocompatibility tested, offer fluorescence for inspection, and adhere to various plastics including polycarbonate, PVC, and ABS.

National Starch & Chemical Co.
Bridgewater, NJ 08807-0500
Feb 28, 2007 DURO-TAK(R) acrylic solution pressure sensitive adhesive is designed to enable dispersed drug patch formulations. Supplied in non-polar cyclohexane solvent, it is targeted at specific drugs that have low solubility in non-polar solvents, and simplifies preparation of dispersed drug-in-adhesive patches by reducing potential for supersaturation.

National Starch & Chemical Co.
Bridgewater, NJ 08807-0500
Feb 28, 2007 Providing high level of drug solubility for hydrophilic drugs such as nitroglycerin, DURO-TAK® 87-202A is supplied in organic solvent solution. Self-curing, pressure-sensitive adhesive also offer high moisture vapor transmission rate, which contributes to long wear times, especially when used with non-occlusive or semi-occlusive backings.

Lord Corporation
Cary, NC 27511
Jan 30, 2007 With LORD Accelerator 19GB Gray mix-in curative, LORD 400 Series Acrylic Adhesive will bond variety of prepared or unprepared aluminum materials. Accelerator allows precise control of adhesive bondline thickness due to its content of 0.01 in. dia glass beads. Used for cars, trucks, specialty vehicles, and boats, cured adhesive distributes stress, acts as sealant, helps prevent corrosion, and maintains original mill finish of exterior surface of thin panels.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Dec 20, 2006 Acriglas® Neon Lights translucent acrylic sheets are suited for illuminated signs, menu boards, and displays as they maintain color and visual appeal when backlit. Standard matte finish on one side allows for better light diffusion, while glossy reverse side provides shiny appearance. Offered in standard size of 4 x 6 ft, and thickness from 1/8-½ in., customized sheets are available in drilled, routed, laser-cut, glued, formed, hot stamped, and silk-screened options.

Acrilex, Inc.
Jersey City, NJ 07305 1122
Sep 20, 2006 Available in custom configured specifications, Acriglas® Pastel Frost line of acrylic sheets are offered in 23 colors in varying degrees of translucency, with matte texture on one or both sides of sheets. Sheets are suited for use in point of purchase displays, store fixtures, furniture, lighting, and in architectural applications where tempered glass cannot be utilized.