Burke Industrial Coatings    Vancouver, WA 98682 2410
Nov 05, 2002 Steel Plus epoxies provide packaging and processing machinery with resistance to harsh CIP sanitation and corrosive chemicals, and are impervious to high-pressure washdown and other severe factory conditions. They have no odor and can be applied to steel, galvanized steel, tin, and aluminum. Epoxies are quick drying, resistant to alkalines and acids, and available in 1 or 5 gal sizes. They can be applied by brush, roller, air-atomized, air-less or hot spray.

Master Bond, Inc.    Hackensack, NJ 07601
Nov 01, 2002 Type EP22 2-component epoxy adhesive features 1:1 mix ratio by weight or volume. It produces high strength bonds with adhesion to metals, particularly steel and aluminum. Bonds are resistant to thermal cycling and chemicals. Epoxy is readily machinable and can be employed over temperature range of -60 to 250°F. Shrinkage upon cure is low and dimensional stability is high. Cure can be accelerated by use of heat. Epoxy is available in pint, quart, gal, and 5-gal container kits.

Tra-Con, Inc.    Bedford, MA 01730
Oct 23, 2002 Two-part TRA-BOND 2170T is suitable for bonding nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton, and almost any thermoplastic substrate. It is thixotropic to allow for more control over flow. Epoxy can be used for automotive, medical, aerospace, photonic, and assembly applications.

Pactiv Corp.    Lake Forest, IL 60045
Oct 22, 2002 Microfoam® ORCAâ„¢ Wrap and Astro-Foam® ORCAâ„¢ Wrap feature protective sheet foam laminations with ventilation holes. Wraps reduce damaged goods, resist scratching, and offer breathability, which minimizes condensation and keeps moisture away from product. Microfoam® Wrap features 1/10th in., polypropylene foam laminated to .8 mil polyethylene film. Astro-Foam® Wrap is made from 3/16 in., low-density polyethylene laminated to .8 mil polyethylene film.

ATOFINA Chemicals, Inc., Atoglas Div.    Philadelphia, PA 19103 3222
Oct 14, 2002 Solarkote A acrylic capstock resin, in layers as thin as 6 mil, screens out UV radiation. Suited for coextruded applications, resin can also be used on watercraft, recreational vehicles, lawn/garden products, building/construction, automotive accessories, outdoor enclosures, tubs, spas, and pool accessories.

ATOFINA Chemicals, Inc.    Philadelphia, PA 19103-3231
Oct 04, 2002 Solarkote® H resin enhances appearance of high impact polystyrene sheet (HIPS) via co-extrusion. Cap layer of 6 to 12 mil provides protection from ultraviolet light, without sacrificing impact performance of composite sheet. Co-extruded layer is inherently colorless, but may be readily colored. It maintains high visible light transmission, permitting wet appearance. Applications include tub/shower surrounds, building trim and shutters, and lawn and garden equipment.

Milamar Coatings LLC / PolyMax    Oklahoma City, OK 73120
Oct 04, 2002 PolyMax DCS consists of high solids epoxy primer/sealer into which blend of vinyl chips is distributed to leave granite looking surface. Surface is sealed with chemical and UV resistant gloss lock coat and finish. PolyMax is non porous, has no grout joints and can be installed with smooth or textured finish. It can be made slip resistant for wet environments, and offers low maintenance, abrasion resistance, and resistance to most food and automotive liquids.

Aremco Products, Inc.    Valley Cottage, NY 10989
Oct 02, 2002 Aremco-Bondâ„¢ 2150 ceramic-filled, vibration-resistant epoxy provides tensile shear strength of 2,350 psi and flexural strength of 11,800 psi. Chemical resistance to acids, alkalis, organic fluids, and salts is provided to operating temperature of 400°F. Black pigmented, 100% solids epoxy cures at room temperature within 24 hr or at 200°F in 30 min. Cured product is machinable and exhibits linear shrinkage of .004 in./in. and Shore-D hardness of 84.

Tra-Con, Inc.    Bedford, MA 01730
Sep 18, 2002 Clear, flexible TRA-BOND 3010 bonds to ceramics, glass, most metals, and many plastics. It exhibits near-zero shrinkage and is resistant to water, weather, gases and vapors, petroleum products, mild acids and alkalis, salt solutions, and other organic compounds. Compound is suitable for aerospace and electronics applications.

Tra-Con, Inc.    Bedford, MA 01730
Sep 17, 2002 Tra-Bond 2106T thixotropic epoxy is recommended for use in lower temperatures or wet industrial bonding applications that require fast cure. When fully cured, it provides electrical insulation and resistance to water, galvanic action, petroleum fuels, and many other chemicals. Epoxy develops tough bonds to metals, plastics, glass, hardboards, ceramics, rubber, masonry, and other construction materials.

Tra-Con, Inc.    Bedford, MA 01730
Sep 10, 2002 Amber-colored, thixotropic Tra-Bond 2170 has low viscosity of 3500 cps. It can be cured at room temperature for 24 hours or at 65°C for one hour. Capable of bonding to all types of plastics, it is suited for applications in medical, photonic, and aerospace industries. Plastics include: nylon, PVC, polyethylene, acrylic, lexan, polypropylene, kapton, and most thermoplastic substrates.

Dyneon LLC    Oakdale, MN 55128
Aug 31, 2002 Dynamarâ„¢ Polymer Processing Additives are suitable for use in polyethylene extrusion applications to eliminate melt fracture and die build-up. In HDPE pipe extrusion, Dynamar FX 5911, FX 9613, and FX 5920B increase output by reducing backpressure during processing. Additives also improve processibility of blown and cast films, blow molded bottles, drums and tanks, extruded pipes and tubes, wire and cable jacketing materials, and extruded fibers.

Tri-Mer Corp.    Owosso, MI 48867
Aug 23, 2002 Suitable for use in corrosive environments, fabrications are manufactured from 3/16 to 1½ in. homogeneous polypropylene. Material is UV-stable and not subject to delamination or environmental stress cracking. Chemically inert and free of plasticizers, fabrications suit process and manufacturing applications. Performance life is rated at 20+ years.

Master Bond, Inc.    Hackensack, NJ 07601
Aug 19, 2002 With 10:1 mix ratio by weight, EP30LTE-LO room temperature curing epoxy system has CTE of 12 x 10^-6 in./in. per °C. Linear shrinkage is rated at 0.0002 in./in. per °C, thermal conductivity is 6 BTU•in./ft²â€¢hr•°F, and service temperature ranges from -60 to +250°F. Able to bond to various metals, plastics, ceramics, and glass, EP30LTE-LO passes ASTM 595 for low outgassing. It suits applications requiring vacuum compatibility, sealant, or encapsulant.

ATOFINA Chemicals, Inc. (Corporate)    Philadelphia, PA 19103 3222
Aug 16, 2002 Solarkote® PB, when blended with PVC and coextruded over PVC as capstock, upgrades PVC properties for exterior building products. It blends to share weathering performance in medium-dark colors where chalking can be a concern. It exhibits color hold in whites, and can be blended in PVC high-shear blending equipment. Applications include PVC siding, window profiles, fencing, and decking.

Dyneon LLC    Oakdale, MN 55128
Aug 09, 2002 PFA-FLEX series ultra-high purity (UHP) PFA resin suits semiconductor processing applications that require environmental stress crack resistance. It provides chemical and temperature resistance as well as low levels of extractable ions. Flexible PFA-FLEX material is available in two grades: PFA-FLEX X 8502 UHP, with nominal 2 melt-flow index for tubing applications, and PFA-FLEX X 8515 UHP, with nominal 15 melt-flow index for injection molding applications.

Parker Hannifin Corp., Seal Group    Irvine, CA 92612 1073
Aug 05, 2002 Sealing materials meet NSF Standard 61 protecting potable water from contaminants that leach or migrate into water from traditional components. Organic materials include 10 EPDM compounds, 7 thermoplastic elastomers, and 2 nitrile compounds that can be formed into faucet and shower gaskets, water filter gaskets, valve seals and seats, pipe coupling seals, and diaphragms and O-rings used in pumps, heaters, and other appliances.

Scapa North America    Windsor, CT 06095
Jul 31, 2002 Unifilm® UF Series acrylic adhesive transfer films adhere to various foams and other difficult-to-bond substrates. Available in 2, 3, and 4 mil thicknesses, UF Series products are formulated with smooth, mirror-like adhesive, and moisture resistant liner. Films offer temperature and chemical resistance. Additional applications include nameplate and decorative part application and general-purpose bonding.

Fiber Optic Center, Inc.    New Bedford, MA 02740 6322
Jul 23, 2002 AngstromBond® AB9031 epoxy based system contains optical silica filler. Creamy paste can be dispensed through syringes or automated cartridges. It bonds to metals, ceramic, silicon, plastics, and glass. Product passes specifications including 1,000 hours in 85/85 environment. Product is suitable for optical bonding and sealing applications where alignment must be maintained during thermal cycling.

3M    St. Paul, MN 55144
Jul 22, 2002 Scotch-Grip(TM) Industrial Adhesive 4491 features rubber/resin blend that resists weathering, water, fuel, oil, and plasticizers. Solvent-based product contains no Hazardous Air Pollutants and meets 250 grams/liter Volatile Organic Compound limit. Product bonds wood, metal, vinyl, foam, leather, fabrics, rubbers, FRP, acrylic, nylon, and many other plastics.