Styrolution Group GmbH    Frankfurt am Main 60325  Germany
Apr 10, 2012 Offering optimal impact strength and weathering characteristics, Luran® S BX11012 acrylonitrile styrene acrylate resin was developed for use in construction market, including decking, fencing, and siding applications. Product can be used as cap layer over other plastics. It provides long-term color stability in wide range of colors, including mid-range and dark colors.

Pecora Corp.    Harleysville, PA 19438
Mar 29, 2012 Combining silicone durability with mildew and mold resistance, 898NST also eliminates potential for staining of natural stones such as granite, marble, and limestone. Neutral cure solution, featuring USDA acceptance, is suited for use in hospitals, schools, clean rooms, kitchens, and bathrooms. It can also be used for resetting or re-grouting ceramic or natural stone tiles.

Aremco Products, Inc.    Valley Cottage, NY 10989
Mar 28, 2012 Used to insulate moisture-sensitive electrical components, including cartridge heaters and high power case resistors, Sil-Bond(TM) 905 demonstrates moisture resistance with weight gain of less than 1% after exposure to 900°F and 24 hours water immersion. Shrinkage rate is also less than 1% and dielectric strength is greater than 250 V/mil. Supplied as powder and liquid system, compound cures in 12-16 hr at room temperature and 30 min each at 150, 250, 350, and 450°F, respectively.

The Borealis Group    Port Murray, NJ 07865
Mar 16, 2012 Offering optimal balance of stiffness, flow, and impact performance, RJ901MO allows stable stacking of finished articles as well as production of complex shapes or long, narrow lengths. Product features transparency and gloss, plus non-yellowing effect, making it suited for thin wall packaging and houseware applications, such as storage boxes and CD/DVD cases.

Eclipse Film Technologies    Hamilton, OH 45011
Mar 15, 2012 Targeting bottle applications, 3-layer polyolefin shrink label films are composed of linear low-density polyethylene and TOPAS® cyclic olefin copolymer (COC). TOPAS COC resin acts as enabling technology, enhancing shrink and gloss while providing sustainability. These recyclable, low density films are separated from PET bottles via standard water flotation recycling systems. Film exhibit 40%-60% machine direction shrink at 100°C and 0%-2% growth in cross/transverse direction at 100°C.

Toray Plastics (America)    North Kingstown, RI 02852
Mar 12, 2012 Addressing needs of consumer-goods companies and converters, Torayfan® F63 heat-sealable BOPP film employs proprietary technology that promotes adhesion of water- and solvent-based inks on print side. Product, developed for use as print web, is especially suited for use with white inks when opacity is desired. Seal-initiation temperature for lap seals enables fast processing on high-speed form-fill-seal equipment.

Eriez Magnetics    Erie, PA 16506
Mar 05, 2012 Used to impart x-ray contrast into food contact plastic articles, PolyMag® XRD products can be used to safeguard consumers against plastic-contaminated food products. FDA-compliant product, available in beige-colored pellets, has co-polymer carrier resin that is compatible with various polymers, including polyethylene, polypropylene, TPE, and TPU resins. Detectable plastics are most often pigmented blue, which can be accomplished when using PolyMag XRD.

Emco Industrial Plastics, Inc.    Cedar Grove, NJ 07009
Mar 02, 2012 Formulated to give optimized color performance with both transmitted and reflected light using white LEDs, LED White Diffusion Sheet can be cut, drilled, and shaped using traditional acrylic fabrication techniques. Continuous cast acrylic sheet is available in 51 x 108.375 x .118 in. size and is suited for airport signage, POP displays, and in-floor lighting.

Teknor Apex Co.    Pawtucket, RI 02861
Feb 21, 2012 Featuring petrochemical content of 35% or less, BioVinyl(TM) Flexible Vinyl Compounds incorporate phthalate-free DOW ECOLIBRIUM(TM) Bio-Based Plasticizers, which are manufactured using plant byproducts and can help minimize greenhouse gas emissions. Typical applications include consumer and industrial products, automotive components, certain medical devices, and certain wire and cable uses.

Solutia, Inc.    Saint Louis, MO 63166
Feb 15, 2012 Designed for applications in which rigidity and high glass adhesion are required, Saflex® DG combines glass containment, UV screening, edge stability, and clarity features. Interlayer is suited for use with annealed and heat-strengthened glass, enabling designs with minimized optical distortion and spontaneous breakage, as well as view-through capability after breakage. Specific applications include exposed edge laminates, floors, stairs, balconies, and point glazing systems.

DSM Functional Coatings    Urmond 6129 EL  Netherlands
Feb 15, 2012 Designed to withstand excessive physical impact, thermal shock, and chemical exposure, URelle(TM)-Crete is suited for pharmaceutical and food/beverage facilities. Three-component urethane cement system protects concrete against mechanical abuse and heavy traffic. Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete meets USDA/FDA standards, and is suitable for exposure to wet processing and steam cleaning.

Wacker Chemical Corp.    Chino, CA 91710
Feb 08, 2012 Intended for household appliance, automotive, and electronics sectors, ELASTOSIL® N9111 single-component silicone rubber compound cures at room temperature in presence of atmospheric moisture to yield silicone with optimized heat resistance and mechanical properties. This alkoxy-curing RTV-1 system, formulated with tin-free catalyst, is fully compatible with platinum-catalyzed silicone products, even in uncured state. Cured rubber is resistant to UV light and temperatures up to 200°C.

Franklin Adhesives & Polymers    Columbus, OH 43207
Feb 07, 2012 Developed primarily to bond pleated glass or paper media to frames of air intake panel filters, FilterFAB 150 blends high viscosity and high solids into thick formula that sets instantly and remains flexible over time. Fiber-filled, vinyl acrylic copolymer sealant is safe to use, non-flammable, produces no harmful fumes, and contains no added formaldehyde. With added antimicrobial agents, product stays bacteria-free long after it has cured.

EMI Supply, Inc.    Concord, NC 28027
Feb 02, 2012 Replacing SU5005 RTV food grade silicone sealant, EMI5005 RTV does not crack or become brittle with age and offers unprimed adhesion to plastic, metal, synthetic rubber, glass, ceramics, and porcelain. This 100% food grade silicone sealant, approved by the USDA, FDA, and NSF, is available in clear, white, black, aluminum, and red high temp. Application range is -35 to +140°F, and service ranges are -62 to +400, +450, +500, or +650°F, depending on constant/intermittent duty and color.

Adell Plastics, Inc.    Brooklyn, MD 21227
Feb 01, 2012 Designed to minimize interfacial forces between polymers and polymer fillers, Maleic Anhydride-Modified Polyolefins optimize adhesion within composite, while facilitating uniform dispersion and stable morphologies. EK-10-MAH is recommended for coupling of glass and other fillers in polypropylene composites, while KK-10-MAH is suited for coupling of glass, wood pulp, and other fillers in HDPE composites.

Polycoat Products    Santa Fe Springs, CA 90670
Jan 30, 2012 Applied at 1/8-3/8 in. dry film thickness via trowel or slurry, PC-CRETE® U can be used to form containment beams or integral cove bases for seamless wall to floor protection as well as to slope floors in horizontal applications. This 3-part, heavy-duty, 100% solids, aromatic, cementitious urethane mortar system has textured matte finish and provides barrier against hydrostatic pressure and thermal shock. Return-to-service time is typically 4-6 hr.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Jan 27, 2012 Featuring 80 Shore A hardness, Elastocon 8078NL provides scratch and mar resistance as well as shock and sound deadening qualities. Product's coefficient of friction results in surface that minimizes collection of dust and debris. RoHS-compliant TPE does not require drying and is latex-free, reclaimable, and recyclable. Offering rubber-like qualities, Elastocon 8078NL is suited for automotive cup holders and storage tray bins, farm equipment, marine products, and lawn/garden tools.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Jan 19, 2012 Formulated for overmolding onto nylon, Elastocon STK56PA and STK56PA-B feature Shore A Hardness of 60 for soft feel. Products offer impact resistance as well as resistance to many chemicals and household cleaning products. Latex-free, RoHS compliant, reclaimable, and recyclable, TPEs are suited for automotive and non-automotive knobs and levers, electronic component housings, and grips for tools, kitchen utensils, medical instruments, and appliances.

Emco Industrial Plastics, Inc.    Cedar Grove, NJ 07009
Dec 09, 2011 Boltaron® sheet serves such industries and applications as aerospace, mass transportation, general thermoforming, corrosion resistant components, and wall protection. Specifically, aircraft-rated Boltaron 4330/9815E meet FAA requirements for flame, heat release, and smoke generation. Specialized grade, Boltaron® 4335, suits commercial/industrial thermoformed and fabricated parts. Also, there are 7 specialized grades of PVC/alloy for Rail and Mass Transit interior applications.

Martin Thomas, Inc.    Barrington, RI 02806
Dec 05, 2011 Manufactured by cast film extrusion, Maxelast® D Series Grade D01-0421 is latex- and phthalate-free, non-toxic and odorless, and compliant with FDA food contact grade standards. Material softens and shapes to user's hands when worn. Weighing 0.09 oz per piece and available in thicknesses of 0.03-0.04 mm, gloves made from Maxelast TPE are suited for food service applications, emergency treatment, lab testing, and electronics manufacturing.