NPI    Brampton L6T 4M2  Canada
Oct 29, 2004 Nexstat-10C896 static dissipative polypropylene compound can be molded with consistent resistivity in range of 10⁶-10⁹ ohms/sq. It protects static sensitive components from damage caused by field induced voltages. Recyclable compound has low ionic contamination, low out gassing, and minimal sloughing. Product suits manufacture of static protective storage bins, tote boxes, guide rails, containers, racks, and shelving.

Solvay Advanced Polymers, L.L.C.    Alpharette, GA 30005-3914
Oct 29, 2004 Amorphous thermoplastic SUPRADELâ„¢ HTS features glass transition temperature of 509°F and heat deflection temperature of 491°F. It is resistant to hydrolysis by hot water and steam, as well as to acids, bases, and flame. In addition to being processed by injection molding, extrusion, and thermoforming, material can also be melt processed. It is suited for automotive, aerospace, electrical, electronic, and industrial product applications.

RTP Co.    Winona, MN 55987
Oct 26, 2004 High-flow conductive polypropylene compound is easy-to-mold, conductive material that achieves typical melt flows of 20 g/10 min and 2160 g at 230°C. Material minimizes warpage and retains physical properties with notched IZOD impact strength of 2.5 ft-lb/in. and no-break unnotched IZOD impact strength. Surface resistivity is 10⁴ ohms/sq, with volume resistivity less than 25 ohm-cm. Applications include complex medical, electronic, and biotechnological devices.

French Technology Press Office, Inc.    Chicago, IL 60601
Oct 19, 2004 Novacel 9380 features 45 micron thick, clear and transparent polyolefin film. Reinforced adhesive layer ensures adherence for protection of white plastic profiles or plastic profiles laminated with decorative film, while avoiding wrinkles or bubbles during manufacturing. UV-treated film can be exposed to outdoor aging for up to 6 months. Novacel 9380 is supplied in rolls of 550 or 1,100 yards and in widths corresponding to widths of profiles.

Richco, Inc.    Chicago, IL 60680
Oct 08, 2004 Model BHLWHC-500-01 locking clip has one-piece design that eliminates need for screws. Push fit installation is achieved with 6 mm hexagonal socket drive pressed on top of mounting fix, then pushed into a 7.9 mm dia blind hole. Barb end fix ensures secure fit, while releasable locking clip facilitates cable installation and removal. Available in Nylon 6/6 material, clip ensures that routed cables remain secure when in position.

Collano AG    Sempach   Switzerland
Sep 30, 2004 Acrylic-based, pressure-sensitive adhesive, HMPSA is tested and approved according to DIN ISO 10093 for cytotoxicity, skin irritation, and skin sensitization. It offers high heat resistance and has MVTR greater than 1,000 gsm/day. Product adheres to skin, but is residue-free upon removal. It is suited for moisture protection for wounds, patches for transdermal systems, and where transparency and comfort are important.

Henkel Loctite Corporation    Rocky Hill, CT 06067
Sep 08, 2004 Loctite® 5210 and Loctite® 5211 non-corrosive sealants are used for wire tacking, selective sealing, vibration dampening, and repair/rework applications on PCBs. Thixotropic, moisture curing Loctite® 5210 lets product conform to applied components while remaining where dispensed. Medium viscosity Loctite® 5211 allows material to flow into applied areas and encapsulates leads and wire bonds. Products withstand temperature ranges from -40 to +200°C.

Eastman Chemical Co.    Kingsport, TN 37662-5075
Aug 27, 2004 Regalite C6100 multi-purpose, partially hydrogenated, hydrocarbon resin improves tack and facilitates application of hot melt adhesives. With odorless and clear formulation, product is compatible with various elastomers and polymers, including SBS, SIS, SEBS, and EVA. Imparting proper balance of cohesive properties as well as tack, Regalite C6100 is suited for use in adhesives for hygiene products as well as elastic attachment applications.

Eastman Chemical Co.    Kingsport, TN 37662-5075
Aug 26, 2004 Synthebond line of polymers, resins, finishes, and fluorochemical extenders are engineered to deliver hand and color fastness, abrasion resistance, oil and water repellency, and increased strength and rigidity for nonwoven applications. Finishing chemicals feature range of binders, performance finishes, softeners, and soil release agents that optimize performance of products such as window coverings, medical gowns, consumer wipes, and filtration systems.

Novacel    DEVILLE LES ROUEN 76250  France
Aug 24, 2004 Novacel 9019 clear, coextruded film, with polyolefin base, protects flat screens against scratches and dirt during assembly, handling, storage, and transport. Applied to clean, dry surface at temperature between 100–200°F, film can remain on polycarbonate, polystyrene, PVC, and other plastic sheets while undergoing heat treatment before and during thermoforming. No adhesive residue remains on surface after removing film.

Georg Fischer Piping Systems    Tustin, CA 92780
Jul 26, 2004 Polyvinylidene fluoride (PVDF), high-purity sheet material meets requirements of Factory Mutual (FM) Clean Room Materials Flammability Test Protocol, Class 4910. FM 4910, manufactured from Kynar® 740 resin, features double-masked surface, fully traceable and verifiable resin, chemical-resistance, and UV-stability. It measures 4 x 8 ft with thicknesses from 1/8-1 in. Sheet features tolerance consistency per ASTM D6713-01 and combustibility approvals by FM 4910, UL2360, and ASTM E84.

Ticona Engineering Polymers    Florence, KY 41042
Jul 23, 2004 Impet® PET FC835, FC840, and FC845 contain glass-mineral filler at loadings of 35, 40, and 45%, respectively. Crystallization rates at 90-100° allow use of water-cooled molds instead of oil-cooled molds. Resins can be injection molded to create components such as automotive luggage racks, spark plug covers, and grill opening retainers.

Fiber Optic Center, Inc.    New Bedford, MA 02740 6322
Jul 21, 2004 Optically-clear, ANGSTROMBOND® AB9053 is suited for bonding lenses, prisms, and quartz windows. Acrylic polymer has low refractive index of 1.41, offers UV cure in as little as 1 sec, and withstands temperatures up to 200°C. Supplied in 3 cc syringes, adhesive will bond to glass, ceramic, plastics, and most metals.

Scapa North America    Windsor, CT 06095
Jun 29, 2004 Unifilm® UJ504 unsupported, acrylic adhesive transfer film offers chemical, heat, and humidity resistance, and will withstand environmental extremes. It exhibits high peel strength, high sheer, high cohesive strength, and creep resistance. Product is suited for bonding nameplates and applying decorative parts, as well as laminating to foam substrates for gasketing and sound control.

Saint-Gobain Performance Plastics - Industrial Belting/Coating Fabric    Hoosick Falls, NY 12090
Jun 24, 2004 Suited for general-purpose gasketing applications, COHRlastic® Brand No. 900X provides UV-resistant, solid silicone solution. Chemically inert product is available in 50, 60, and 70 Shore A durometer. Commercial Grade material is manufactured in 36 in. wide continuous length rolls or in 36 x 36 in. sheets. Produced in 1/16, 1/8, and ¼ in. thicknesses, COHRlastic Commercial Grade Rubber operates over temperature range of -65 to +450°F.

UFP Technologies, Inc.    Georgetown, MA 01833 2107
Jun 21, 2004 Customized polyethylene foam dunnage bars are designed for automotive and other material handling applications. Foam bars have density of 9 lb/ft³, and offer lightweight alternative to polyurethane foams.

Devcon    Danvers, MA 01923
Jun 17, 2004 Plastic Welderâ„¢ SD structural methacrylate adhesive fills gaps, bonds to green fiberglass without sagging, and can be used to join engineered plastics to dissimilar substrates such as metals, ceramics, and wood. High-strength, load-bearing bonds are resistant to weathering, impact, and peeling, and withstand service temperatures to 250°F. Adhesive has a working time of 4-5 min and attains functional cure in 2-4 hr at room temperature.

Ticona Engineering Polymers    Florence, KY 41042
Jun 17, 2004 Riteflex® MT9000 series copolyester thermoplastic elastomers (TPE) are certified for use in pharmaceutical, medical, and food-contact applications. Series, which includes 7 grades, contains no plasticizers or animal ingredients and can be compounded in various FDA-compliant colors. Elastomers have softness, flexibility, and resilience of rubber, but are processed like thermoplastics by molding and extrusion processes. They resist solvents, oils, greases, and dilute acids and bases.

Revere Products    Cleveland, OH 44135 0311
Jun 16, 2004 Pourable, self-leveling CON-CRAX® repairs concrete damage and remains flexible to resist cracking during seasonal weather changes. It requires no mixing or troweling and dries quickly to form watertight seal. Product's color blends with surrounding concrete, making it suited for driveways, sidewalks, parking lots, or stairs. It can be squeezed into cracks up to ½ in. wide and 1 in. deep. CON-CRAX is available in 1 qt bottles, 1 gal bottles, or 5 gal pails.

Solvay Engineered Polymers    Auburn Hills, MI 48326
May 28, 2004 NexPrene® 9000 fully vulcanized materials range in hardness from 40 Shore A to 50 Shore D. They exhibit resistance to oil swell and compression set. Each offers consistent, natural color with yellowness index of less than 16. Bright whites can be obtained using concentrations of titanium dioxide as low as 0.5%. Since materials do not absorb moisture from atmosphere, they do not need to be dried prior to processing.