SABIC Innovative Plastics    Pittsfield, MA 01201
Aug 20, 2012 Noryl SA90 resin, designed as additive for epoxy and cyanate ester-based thermosets, provides low dielectric constant and loss factor to enable 1-10 GHz performance in epoxy-based PCBs. Noryl SA9000 resin provides low dielectric constant and loss for performance up to 20 GHz in non-epoxy based thermoset systems. Both low molecular weight, bi-functional oligomers provide moisture stability and minimized loading of non-halogenated flame retardants.

Starfire Systems    Malta, NY 12020
Aug 20, 2012 With general structural thermal insulators and ability to resist aggressive environments, SMP-500 and SMP-800 poly-carbosilane polymers are suited for high temperature applications within chemical processing industry. Based on poly-carbosilane resins, SBMC-900 and SBMC-998 carbon fiber bulk molding compounds offer non-catastrophic failures under loads. Both enable customers to mold net and near net shaped ceramic composite parts.

Aremco Products, Inc.    Valley Cottage, NY 10989
Aug 15, 2012 Able to be used in applications to 400°F, Aremco-Bond(TM) 820 is suited for general-purpose bonding of ceramics, glass, plastics, metals, and other substrates. This clear, unfilled, 100% solids epoxy system mixes in 1:1 ratio, providing mixed viscosity of 12,000 cps and cure time of 45 min at room temperature. Along with respective flexural and tensile shear strengths of 8,000 and 1,200 psi, properties include 860 V/mil dielectric strength and 70 Shore-D hardness.

United Resin Corp.    Royal Oak, MI 48073
Aug 15, 2012 Suited for use with Teflon, Nylon, rubber, and stainless steel, E-Cast Flexabond Sprayable Resin/740 Hardener features thin viscosity for spraying or rolling very thin bond lines, while medium-viscosity E-Cast Flexabond Resin/740 Hardener is suitable for regular application. Industrial grade Hi-Strength Tuff Bond Resin/250 Hardener with toughened medium viscosity is also available. Systems exhibit tensile strength up to 10,000 psi, LAP shear up to 4,500 psi, and T-Peel strengths up to 50 plt.

The Borealis Group    Port Murray, NJ 07865
Aug 13, 2012 Used for creation of lightweight, transparent, non-opaque, colored hinge closures, BorPure(TM) RF490MO achieves stiffness levels and dimensional color stability via Borealis Nucleation Technology (BNT) while retaining impact performance of existing random PP grades. Fluidity facilitates processing for smooth production cycle and properties preserve desired product taste and appearance. This product is approved for use in food contact applications.

Universal Package Systems, LLC    Dale, IN 47523
Jul 05, 2012 Constructed of HDPE plastic, rigid plastic corrugated, or both, Tradeshow Cases are built to match each customer's exact requirements. Available options include hinged drop doors on sidewalls, collapsible sidewalls, hinged or loose lids, locks, label holders, casters, and fork lift entry. Suitable for shipping and storing booths, displays, equipment, sub-assemblies, literature, and supplies, cases can also be used as tables or storage units in booth itself.

Alliance Polymers & Services    Romulus, MI 48174
Jun 29, 2012 Suited for overmolding onto polypropylene base for handles, P2844 Series Maxelast® thermoplastic elastomers (TPEs) provide soft, ergonomic grip. TPEs are available in translucent and natural color pellets and have 25-30 Shore A hardness range. In addition to stand alone applications, uses include toothbrush handles as well as other products where colorability and soft feel are required or desired to enhance consumer appeal.

Wacker Chemical Corp.    Chino, CA 91710
Jun 28, 2012 Based on vinyl acetate-ethylene copolymers, VINNAPAS® EP 8010 permanently bonds challenging paper and cardboard surfaces, such as coated or painted paper, and polymeric film. Aqueous dispersion is manufactured without use of alkylphenol ethoxylates and makes supplementary plasticizers unnecessary. Delivering heat-resistant bond, product is suited for formulating adhesives used in food packaging bags and up-market folding boxes, as well as laminated products for car interiors.

Solvay Advanced Polymers, L.L.C.    Alpharette, GA 30005-3914
Jun 11, 2012 Intended for use in implantable medical devices, Zeniva® ZA-520 radio-visible polyetheretherketone (PEEK)-based material provides image contrasting capabilities via specific additive for optimal visualization with x-ray, CT, and MRI systems. Compound is available in resin and rod stock and provides visibility of implant without artifacts common to metallic-based materials. Benefits include biocompatibility, chemical inertness, and modulus of elasticity close to that of bone.

Interstate Specialty Products    Sutton, MA 01590
May 31, 2012 Exhibiting compression-set resistance, Custom Die Cut PORON® Medical Urethane Foams provide cushioned gasket seal that will not break down over extended use. Products are available from 0.030-1 in. thick with ±0.005 in. tolerance, in various colors, with or without adhesive backings. Offered in 4 grades of compressibility, determined by compression deflection, foams have open-cell, micro-cellular construction that breathes and contains no plasticizers or residual chemicals.

TENNANT    Minneapolis, MN 55426
May 31, 2012 Made using 95% plant-based BiOH® polyol, Eco-ITS(TM) bio-based urethane floor coverings are designed to protect floors in manufacturing, industrial, and warehousing facilities. Sustainable coating application improves productivity and minimizes shutdowns. Available in clear or various colors with gloss or satin finish, product offers 21 g/L VOCs (clear) and 23-46 g/L VOCs (color) and qualifies for multiple LEED® credits.

RTP Co.    Winona, MN 55987
May 30, 2012 Pre-tested for compliance with ISO 10993 biocompatibility standards, RTP 6042 MD and RTP 6003 MD Series are naturally opaque, fully colorable, and offer respective Shore A hardness ranges of 40-70 and 45-75. Both thermoplastic elastomer (TPE) bondable grades, designated as change controlled compounds, are formulated to bond with ABS, PC, PC alloys, PBT, rigid TPU, or co-polyester substrates using multi-shot or insert molding processes.

Momentive    Albany, NY 12211
May 14, 2012 By surrounding fragile solar cells of crystalline PV module with flexible, stress dissipating silicone matrix, SilTRUST Encapsulant helps maximize performance in harsh outdoor environments while optimizing light-to-electricity conversion yield. Refractive index of transparent encapsulant closely matches that of glass, minimizing energy-dissipating reflection of sunlight away from solar cell. At 80°C, silicone module is virtually stress-free.

Curbell Plastics    Orchard Park, NY 14127
May 11, 2012 Available in ½-6 in. diameter rods and 3/8-4 in. thick sheets, Sustarin® C XDT Acetal Copolymer and Polystone® M XTD UHMW-PE can be detected by X-ray inspection equipment for pieces as small as 3 mm³ on production lines running as fast as 250 fpm. Both materials are FDA-compliant for direct food contact. Detected in various types of packages, including metal cans, glass jars, and plastic containers, materials are suitable for scraper blades, filler/mixer components, wear/slide guides, and baffles.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
May 08, 2012 Available in black pellets with 50 Shore D hardness, 9050BX thermoplastic elastomer (TPE) provides alternative to TPOs and TPVs. Material properties are suited for it being used for trim rings and panels required for electronic consumer products as well as various transportation equipment and interior instrumentation that demands durability, abrasion resistance, and impact isolation. Also, TPE can be molded as integral part in fastening systems requiring impact resistance.

Tnemec Co., Inc.    Kansas City, MO 64120
May 03, 2012 Formulated with Cabot's Enova® aerogel, Series 971 Aerolon Acrylic and Series 975 Aerolon Epoxy are fluid-applied, high-build coatings that respectively achieve 160 and 60 mils dry film thickness when spray-applied to piping, tanks, valves, or other steel substrates in industrial facilities. Hydrophobic formulations bond with high-performance primers for durable barrier that resists corrosion under insulation.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
May 02, 2012 With Shore A Hardness of 60, Elastocon STK56PA natural and STK56PA-B black TPEs provide dry touch ergonomic feel while offering resistance to scratching and marring. Products do not require drying and are suitable for applications that require rubber-like properties, impact resistance, chemical resistance, and colorability. Typical uses include soft touch knobs and levers, electronic component housings, and grips for tools, utensils, medical instruments, and appliances.

Star Thermoplastics    Broadview, IL 60155
May 01, 2012 Available in numerous stock grades and hardnesses from 59-93 Shore A and 41-51 Shore D, StarPrene® TPEs are resistant to many acids, bases, and aqueous solutions. Elastomers offer both flexibility and colorability and support variety of processing options including injection molding, extrusion, blow molding, and thermoforming. Products are suited for automotive parts, appliances, electrical products, healthcare and packaging goods, and construction components.

DSM Functional Coatings    Urmond 6129 EL  Netherlands
Apr 16, 2012 Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete protects concrete against mechanical abuse and heavy traffic, as well as extreme conditions such as thermal shock associated with hot water discharge. Three-component urethane cement system, offering resistance to wide range of cleaning and processing chemicals, is suited for pharmaceutical and food/beverage applications.

Styrolution Group GmbH    Frankfurt am Main 60325  Germany
Apr 11, 2012 Created for packaging applications where high-impact polystyrene is blended with unmodified polystyrene, Styrolution(TM) PS 6220 features high-gloss properties that can help eliminate need for co-extruded gloss layer. Product can be blended with general purpose polystyrene to customize toughness and stiffness properties based on application.