Rohm & Haas Co.    Philadelphia, PA 19106 2399
Nov 01, 2007 Able to withstand hot shear tests at 150°F for more than 50 hr, ROBOND(TM) Prohesion water-based, pressure sensitive acrylic adhesive is suited for door panels, interior pillars, instrument panels, and ductwork. Humidity resistant product retains more than 80% of its peel after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Bonding agent exhibits anchorage to substrates with both high and low surface energy.

Dow Corning Corp.    Midland, MI 48686 0994
Oct 29, 2007 DOW CORNING® OE-6665 A/B, DOW CORNING OE-6630 A/B, and DOW CORNING OE-6635 A/B are 2-part high refractive index (HRI) silicone encapsulants that improve high-brightness LED performance and durability by preventing electrical and environmental damage while increasing light output and minimizing heat build-up. Offered in various hardnesses and viscosities to suit range of applications, products have refractive index of 1.53 and are resistant to heat, chemicals, and UV light exposure.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
Oct 26, 2007 Utilizing extremely small particles of titanium dioxide to absorb UV light, DuPont(TM) Light Stabilizer 210 protects plastic and anything it covers from sun's damaging rays. Product works by absorbing UV rays and changing them into small amounts of heat, which dissipates quickly without damaging plastic. Additive is suited for use in sporting goods, outdoor furniture, fabrics, and carpet fibers, as well as plastic films and sheeting to protect plants in greenhouses.

Rohm & Haas Co.    Philadelphia, PA 19106 2399
Oct 19, 2007 Designed for pressure-sensitive tapes and other applications traditionally served by solvent-based adhesives, water-based ROBOND(TM) Prohesion withstands hot shear tests at 150°F for more than 50 hr and retains more than 80% of its peel adhesion after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Product adheres aggressively and exhibits optimal anchorage to substrates ranging from high surface energy to low surface energy.

Air Products & Chemicals, Inc.    Allentown, PA 18195
Oct 16, 2007 With zero VOCs, Ancarez(TM) AR555 is suited for floor, institutional, and OEM coating applications. Fast-dry performance optimizes sandability and stackability, while coalescing properties enable uniform film formation, and anti-corrosive attributes make product suitable for providing protection.

Garon Products, Inc.    Wall, NJ 07719 1924
Oct 11, 2007 Applied by roller, MORTARTHANE(TM) SL is self-leveling, durable floor topping that withstands repeated exposure to hot oil or steam without pitting or cracking. It is packaged in premeasured components in 5 gal unit covering 32 sq ft at 3/16 in. deep. MORTARTHANE(TM) HF is trowel-applied and packaged in 5 gal units covering 18 sq ft at ¼ in. deep. Both thermal shock-resistant resurfacers meet USDA, FDA, and OSHA standards.

Sherwin-Williams    Cleveland, OH 44115
Oct 09, 2007 Providing lasting color and gloss retention, FluoroKem Fluoropolymer Urethane Finish is graffiti, chemical, and abrasion resistant, and meets AWWA performance standards. Product has VOCs less than 340 g/l and can be applied by brush, roll, or spray to primed steel, galvanized steel, or aluminum. Applications include convention centers, water tanks, casinos, and other highly visible areas.

Pecora Corp.    Harleysville, PA 19438
Oct 09, 2007 Designed for architects, builders, and contractors, NST Non-Staining Technology(TM) sealants - 864NST, 890NST, and 895NST - are formulated to retain original color and minimize dirt pick-up when applied to porous substrates. They maintain flexibility necessary to accommodate constant building movement and will not damage substrate. Variety of modulus and colors are available.

Wacker Chemical Corp.    Adrian, MI 49221
Oct 03, 2007 Imparting silky-velvety hand, WETSOFT® NE 580 silicone softener emulsion is designed for hydrophilic finishing of textiles. Self-dispersing microemulsion concentrate imparts absorbency and stability in alkaline solutions. Used on its own or together with other finishing agents, it is suited for use in finishing natural, mixed, and synthetic fibers. Solution remains stable when exposed to high pH values, elevated temperatures, high shear, and salts.

Novacel    DEVILLE LES ROUEN 76250  France
Oct 02, 2007 Designed on basis of polyolefins, NOVAGUARD® 9377 protects automobile bodies and parts against external aggressions such as acid rain, bird droppings, and tool marks during assembly, transport, and storage. No treatment of discharges into atmosphere is necessary due to opaque white plastic film's solvent-free adhesive. Offering 9 months of exterior weather resistance, reclaimable/recyclable film is 2.4 mil thick and comes in 656 ft reels in widths from 1.2 in. to 9 ft.

Diolen Industrial Fibers    ARNHEM 6800 TC  Netherlands
Sep 17, 2007 Made with Fortron® polyphenylene sulfide, high-tenacity Diofort® is inherently flame-retardant and chemical resistant. It can be combined with glass, carbon, and other polymer fibers to yield blended fabrics. In addition to reinforcing hydraulic oil hoses in power steering systems where it reduces noise and vibration, product can be applied in fuel lines and charge-air coolers to provide resistance to high pressure and temperature while allowing flexibility.

Objet Geometries Inc.    Billerica, MA 01821
Sep 11, 2007 Featuring high resistance to tearing, TangoPlus FullCure930 addresses broad range of applications requiring rubber-like material such as gaskets and seals, hoses, athletic footwear, and toys. It has Ross Flex measurement in excess of 150,000 that provides resistance to deterioration and suits models that are likely to be exposed to long use or rough handling. Designed for 3D modeling market, semitranslucent elastomer offers specific levels of elasticity.

Master Bond, Inc.    Hackensack, NJ 07601
Sep 07, 2007 Suitable for high performance casting, potting, and encapsulation, MasterSil 151 two component compound is designed to cure at room temperature and is resistant to vibration, impact, shock, and thermal cycling. Features include service operating temperature range of -65°F to +400°F, elongation at break of 160%, 460 V/mil dielectric strength, volume resistivity of 1 x 1,015 W cm, and 10:1 mix ratio by weight. Low viscosity assures complete fill-in around complicated contours.

Basell Polyolefins    Wilmington, DE 19808
Aug 30, 2007 Targeting processors of clear, thin-wall, injection-molded (TWIM) food applications, Clyrell EM248U can also be used in in-mold labeling (IML) and off-set printing. Metallocene-based Metocene polypropylene (PP) copolymer is reactor-grade product which does not require vis-breaking or peroxides, and features low organoleptic properties. Clyrell EM248U's high heat deflection temperature also enables it to retain stiffness in hot-fill applications.

Dow Corning Corp.    Midland, MI 48686 0994
Aug 29, 2007 Dow Corning® S Series liquid silicone rubbers are also appropriate for disposable applications in IV sets and catheters as well as for components such as valves and O-rings. Similar to existing LSRs and consistent across Dow Corning® S40, S50, and S70 Liquid Silicone Rubber, chemistry features framework that optimizes it from molecular level. Products reach ultimate physical properties upon initial cure with no drift.

Creative Film Corp.    Lakewood, NJ 08701
Aug 22, 2007 Made from non-burning, self-extinguishing PVC resins, Polychrome(TM) Texturized yields look of brushed metal in high-polish, top surface smooth film. Film is offered in silver, gold, brass, and gun metal with choice of fine stainless brush effect or embossed brush effect. Primarily used as packaging and display film, product is adaptable for use in signage, labeling, and decor. Secondsurface manufacturing process yields customizable, print-ready surface.

Hexis USA LLC    Corona, CA 92880
Aug 07, 2007 Available in 48 in. x 65 ft rolls, Carprotect transparent 5.9 mil film with shockproofing properties protects vehicle paintwork against environmental aggressions. It protects vehicle bodywork, doorsills, bumpers, headlights, and wing mirrors against damage from stone chips. Film resists carwash brushes, high-pressure steam cleaners, abrasion, friction, exposure to sunlight, and petrol spillage. Adhesive formulation allows clean removal of film without leaving adhesive residues.

DelStar Technologies, Inc.    Austin, TX 78745
Aug 06, 2007 Delnet® apertured films are manufactured from TPX(TM), 4-methylpentene-1 based polyolefin, for safe and non-toxic use in medical, food-grade, and other applications requiring heat resistance, transparency, and chemical/hydrolysis resistance. Produced in multiple configurations, TPX has melting point of 460°F and visible light transmittance of 90%. Colorless product features low water absorption (0.01%), and hydrolysis will not cause dimensional changes or physical property deterioration.

Teknor Apex Co.    Pawtucket, RI 02861
Aug 06, 2007 Providing rubber-like flexibility, Elexar® EL-1392B can be used in insulation, jacketing, and molded plugs and connectors. It meets flame test requirements specified in UL 94 V-0 for thicknesses of 0.06 in., passes VW-1 vertical flame test per Method 1080 per UL 1581 as both insulation and jacket, has oxygen index of 28%, and exhibits no dripping when burned. Styrenic block copolymer TPE compound provides continuous use rating of 105°C.

Rohm & Haas Co.    Philadelphia, PA 19106 2399
Jul 31, 2007 Designed to enhance polylactic acid polymer, PARALOID(TM) BPM-500 strengthens packaging while maintaining clarity. Using dispersible nanoparticles that do not scatter light, additive allows for production of PLA packaging material that exhibits less than 10% haze at 5% loading. Eco-friendly product offers optimized impact and tear resistance. It complies with food contact requirements in Europe and with room temperature food contact requirements in US.