Chemicals & Chemical Processing ->
(Showing headlines 181 - 200) << 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 ...
Acrylic Conformal Coating has eco-friendly formulation.
Cytec Engineered Materials
Winona, MN 55987
Jan 12, 2010
Based on acrylic technology and bio-derived, ecologically-friendly solvent system, CONAP® CE-2290 does not require use of petroleum-based or reportable solvents and is free from hazardous air pollutants. Solvent portion is non-carcinogenic, biodegradable, and free of ozone-depleting solvents. RoHS-compliant and repairable, coating exhibits tack-free air drying time of 5 min @ 25°C and exhibits hydrolytic stability. It adheres to PCBs and electronic components.
Acrylic Adhesive bonds wide variety of substrates.
Cary, NC 27511
Jan 11, 2010
Able to bond various substrates including unprepared metal with minimal substrate preparation, tack-free Maxlok(TM) is available in 3 cure speeds, each incorporating glass bead technology, ensuring optimum bond line thickness. Gray in color, adhesive matches or blends with most metals and performs at temperatures from -40 to +300°F. Adhesive defies dilute acids, alkalis, solvents, greases, oils, moisture, salt spray, and weathering, while providing resistance to UV exposure.
Thermoplastic Elastomer overmolds onto acrylic surfaces.
Elastocon TPE Technologies, Inc.
Rochester, IL 62563
Jan 06, 2010
Offering rugged performance and durability, STK40 Series thermoplastic elastomer (TPE) overmolds onto acrylic resins such as Lustran, Plexiglas, Perspec, Acrylite, and Polycast. It seals against weather and moisture and features 40 Shore A softness. Available in black or natural, SEBS-based TPE can be supplied in 1,000 lb or less quantities for compounding or as ready-to-use pellets. It can be used on lights, street signs, and button gaskets for protective or decorate purposes.
Hot Melt Adhesives have environmentally safe formulation.
Columbus, OH 43207
Jan 05, 2010
Offering environmentally safe alternative to UV-curable and solvent-based PSAs, Acrynax® acrylic polymer hot melt adhesives come in 4 formulas to meet product requirements. All adhere to variety of materials, including polyester, glass, steel, aluminum, vinyl, fabric, non-wovens, and paper. They are optically clear, skin-friendly, and resistant to water, solvents, UV light, and many plasticizers. Because they are fully cured, adhesives allow for optimum coating speeds.
PET UV Additive offers UVA protection with non-yellowing clarity.
Tarrytown, NY 10591-5130
Dec 21, 2009
CrystalClear PET UV additive masterbatch permits bottle molders and sheet processers to produce clear, non-yellowed packages with UV protection to preserve product integrity, color, flavor, and nutrition. Offering protection up to 380 nm, it is recommended with LDR of 0.5-1% for use in standard bottle applications. Product is FDA-approved and will not contribute to plate-out issues during molding.
Nylon Compound adds strength to injection molded parts.
Chem Polymer Corp.
Fort Myers, FL 33911
Dec 11, 2009
Chemlon 217 GI is 17% glass fiber-reinforced nylon 6 compound with levels of stiffness, flexural strength, and tensile strength suitable for injection molded applications that undergo challenging dynamic forces. Impact-modified and UV-stabilized, it suitable for outdoor and low-temperature environments. Compound can be used in applications such as office chairs, outdoor power equipment, outboard motor covers, and gun stock components.
Extruded PE Foam Plank targets packaging applications.
Deerfield, IL 60015
Dec 09, 2009
Available in 48 in. width and 3 in. thickness, PolyPlank® EXT single cross section, polyethylene foam plank is produced via extrusion process, which creates homogeneous foam product with dimensional stability. Closed-cell structure makes it buoyant, virtually impermeable to water, and resistant to water vapor transmission. Available in 1.7 or 2.2 lb densities, product can be die cut, heat-sealed, welded, glued, saw cut, split, skived, water jet cut, routed, and drilled to specifications.
LLDPE Resin enhances high-throughput flexible packaging films.
Dow Chemical Co., The
Midland, MI 48674-0001
Dec 01, 2009
Suited for high-throughput lamination and protective film applications, XZ 89446.00 linear low density polyethylene (LLDPE) resin exhibits qualities that promote conversion rate processability and seal. Polyolefin copolymer LLDPE, used for blown and cast flexible packaging film structures, can be used alone or in blends with low density polyethylene (LDPE) and has 2 g/10 min Melt Flow index and 0.916 g/cm³ density.
Wet Peel Ply provides clean bonding surface.
Rocky Hill, CT 06067
Dec 01, 2009
Used for surface preparation of composite substrates, Hysol® EA 9896(TM) WPP resin impregnated nylon peel ply optimizes process efficiency by eliminating need for sanding or grit blasting. Composite bonding film also eliminates residual peel ply fibers at bond surface after curing and removal.
Pressure Sensitive Adhesive is designed for use on vinyl.
Columbus, OH 43207
Nov 30, 2009
Covinax 404 vinyl acrylic copolymer was developed specifically for use in adhering vinyl to other substrates. It is suited for use with vinyl lettering applied on banners and other signage, works on metal, and performs well in outdoor environments. It features approximately 3 lb of peel and 3,000 minutes in shear, making it also useable as permanent general-purpose adhesive. It works well on many substrates, including polyester and paper as well as vinyl.
Thermoplastic Elastomer Compounds provide UL-V0 flame retardance.
Teknor Apex Co.
Pawtucket, RI 02861
Nov 20, 2009
Including 6 grades, with Shore A hardness ranging from 58-85 and upper use temperature from 105-125ºC, Elexar High-Performance FR series compounds feature RoHS compliance and UV and oil resistance. They can handle temperatures down to -50°C and provide colorability and non-blooming surfaces for applications where appearance is critical. Applications include insulation and jacketing for automation and control cables, molded electrical components, and consumer and industrial goods.
Washers suit broad range of applications.
Minneapolis, MN 55406
Nov 06, 2009
Available without tooling charges in short, medium, or long runs, Washers range in size from 0.080-12 in. O.D. They come in choice of more than 2,000 commonly specified and hard-to-find materials, including low carbon sheet steel, 5 types of spring steel, stainless steel, aluminum, brass, copper, and nickel silver. Non-metallics, such as ABS, acetal, polyester, nylon, PTFE, polycarbonate, fiber, polyethylene, and various phenolics are also available.
Engineering Plastic can be sensed by metal detectors.
Emco Industrial Plastics, Inc.
Cedar Grove, NJ 07009
Nov 04, 2009
SUSTARIN® C MDT is acetal with additives that allow it to be traced by standard metal detectors and removed before causing food contamination. Mechanical, thermal, and chemical resistance properties are same as standard acetal and its dimensional stability is suitable for close tolerance parts on machinery. Available in rods with ¼-8 in. dia and sheets from 3/8-4 in. thick, blue-colored product complies with FDA regulations for direct contact with food.
Specialty Copolymer Resins offer extreme performance capabilities.
SABIC Innovative Plastics
Pittsfield, MA 01201
Nov 03, 2009
Optimized for high melt flow without any decrease in toughness, Lexan HFD resins also exhibit ductility that does not negatively affect melt flow. Chemistry permits use down to -40°C and combines 2 monomers to ensure performance in demanding applications. Offered in 5 grades with up to 5% bio content and with/without UV stabilizers, resins allow for creation of thinner-wall parts without risk of cracking upon mold removal. Properties also reduce molded-in stress to avoid birefringence.
Epoxy Adhesive has linear shrinkage of 0.0003 in./in.
Master Bond, Inc.
Hackensack, NJ 07601
Oct 29, 2009
Low viscosity, optically clear, two part epoxy compound, EP30LV-1 is formulated to cure at room temperatures, and forms bonds with both similar and dissimilar materials including metals, glass, ceramics, wood, vulcanized rubbers and many plastics. Electrical insulator adhesive requires only contact pressure for curing. Suitable applications include optical, electronic, electrical, computer, metalworking, appliance, automotive and chemical industries.
UHMW Polyethylene enables conveying of sensitive products.
Emco Industrial Plastics, Inc.
Cedar Grove, NJ 07009
Oct 28, 2009
Available in ½-8 in. diameter rod and ¼-4 in. thick sheet, Polystone® M Soft offers gentle sliding properties and abrasion resistance. Friction between product being conveyed and material that it comes into contact with is kept to minimum. UHMW-PE material is suited for timing screws, sprockets, change parts, star-wheels, roller, guides, and profiles.
Laminated Glass Interlayer suits indoor/outdoor applications.
Saint Louis, MO 63166
Oct 20, 2009
With light transmittance level of 0%, Vanceva Absolute Black adds privacy and balance to interior and exterior laminated glass applications. Opaque PVB-based interlayer can be used as single layer in glass laminate or combined with colored interlayers. Applications range from residential doors, side-lites, and transoms to kitchens and baths, partitions, and conference rooms.
Silver-based Silicone Elastomers have antimicrobial properties.
Momentive Performance Materials
Strongsville, OH 44149
Oct 12, 2009
Available in high consistency rubber and liquid silicone rubber, silver-based StatSil Elastomers offer built-in antimicrobial protection making them suited for medical, pharmaceutical, cosmetics, and food industries. Products offer resistance to chemicals, provide biocompatibility, are virtually odorless, and are available with many international recognized approvals such as USP Class VI, ISO 10993, BfR and FDA.
Fiber-Optic Sealant handles applications to 716°F.
Aremco Products, Inc.
Valley Cottage, NY 10989
Oct 09, 2009
Single part, water-dispersed, ceramic-silicone sealant Fiber-Bond(TM) FO-380 seals fiber optic strands into stainless steel and ceramic ferrules used to support fiber optic bundles for high temperature applications to 716°F. It has viscosity of 60 Cp, solids content of 21.0% by weight, and offers moisture resistance and dielectric properties across operating temperature range. Applied by brush, dipping, or spraying, sealant sets at room temperature and cures fully in 45 min at 450°F.
Composite Cement is lightweight and flexible.
SureCrete Design Products
Dade City, FL 33523
Oct 05, 2009
Xtreme Lightweight Series is blend of cement with lightweight aggregates and reinforcing fibers. Fireproof, termite-proof, and mold-resistant, it can be cut, trimmed, nailed, molded, and formed into any shape. Product also allows any finish or any texture of wood or stone to be simulated; it attaches to gypsum, wall board, and concrete block, wood, and metal and can be stained, painted, or colorized throughout mix.
(Showing headlines 181 - 200) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37