Herbold Meckesheim USA
Smithfield, RI 02917
May 09, 2008 Suitable for dry or wet operation, horizontally fed SB Series granulate containers made of Polyethylene Terephthalate (PET) and other recyclable plastics. Horizontal feeding screws force materials from hopper to adjacent cutting chamber at steady, even pace instead of depending on materials to fall directly into blades, which reduces fines and dust. Granulators can also be used for secondary size reduction of pre-shredded plastics.

West Development Group
LaGrange, OH 44050
May 07, 2008 Designed for use on sprayed-in-place polyurethane foam, HSS 535 and HSS 540 R2R(TM) one-component coatings are tack-free within 1-2 hr and cure at normal temperatures in 2-6 hr by reacting with moisture in air, forming flexible moisture-free seal. Because coatings are solvent-free, they are environmentally friendly while providing same functionality as petroleum-based roofing materials. Both passed ASTM E108 flame spread test and obtained UL Class A fire rating.

RTP Co.
Winona, MN 55987
May 06, 2008 Featuring consistent mechanical properties across hardness spectrum of 50-75 Shore A, Series RTP 6042 thermoplastic elastomer compounds bond variety of rigid substrates including PC, ABS, PC/ABS, PC/PBT, PC/PMMA, and RTPU resins. Compounds are suited for rugged electronic devices with over-molded designs where optimal tensile and shear strength as well as abrasion resistance is required.

SABIC Innovative Plastics
Pittsfield, MA 01201
May 05, 2008 Optimized for injection molding and plating processes, special grades of Cycoloy polycarbonate/acrylonitrile-butadiene-styrene (PC/ABS) resin and Cycolac ABS resin help automakers incorporate chrome details into their designs. Cycoloy CP8930 (high heat), Cycoloy CP8320 and MC1300 (medium heat) resins, and Cycolac MG37EP resin feature impact modifier that ensures consistent adhesion of chrome layer and are formulated for minimal stress to ensure uniform plating behavior.

Dampney Co., Inc.
Everett, MA 02149
Apr 30, 2008 Thurmalox® 8886 Series delivers long-term protection in weathering conditions and creates barrier against attack from glycol cooling agents and synthetic lubricants at temperatures up to 450°F. Available in clear, black, and custom OEM colors, these 2-component silicone copolymer coatings can be applied by conventional and airless, HVLP, HTE, or assisted airless spray equipment. Coatings adhere to clean, smooth steel, copper, and aluminum substrates.

Sto Corp.
Atlanta, GA 30336 5609
Apr 30, 2008 Suited for new construction or renovation, StoCreativ® Granite acrylic-based interior and exterior wall finish is trowel-applied and comes in 10 colors. Use of this product, which is compatible with Sto Classic Wall Claddings (including Sto Classic NExT®), helps incorporate natural looks and colors in finished walls.

DuPont Co., Packaging & Industrial Polymers
Wilmington, DE 19898
Apr 28, 2008 Offering alternative to petroleum-based products, DuPont(TM) Biomax® TPS thermoplastic starch consists of sheet rock that contains 85-90% renewably sourced content for thermoformed trays and articles, and resins for injection-molded parts and containers. With up to 35% renewably source content, Biomax® PTT injection moldable resin is suitable for injection-molded containers, cosmetic packaging, and other parts where polyesters are used.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 18, 2008 Curing tack-free within seconds, Loctite® 3974(TM) permanently bonds materials with differing coefficients of thermal expansion and accommodates substrate expansion/contraction. Single-component acrylic adhesive cures upon exposure to UV or visible light and can be used on glass, thermoplastic, and metal assemblies for medical device bonding, potting, and sealing applications. Characteristics include A70 Shore hardness and 100% elongation.

Ticona Mfg.
Summit, NJ 07901-3914
Apr 04, 2008 With no objectionable color change or blooming, Riteflex® UV655M TPC-ET thermoplastic polyester elastomer for monofilaments, multi-filaments, and nonwovens is suited for office furniture, auto interior, and outdoor products. It provides in excess of 85% property retention for color and elongation at UV exposures of as much as 2,000 kJ/m². Features include hydrolysis resistance, thermal stability, flame retardant to non-halogen XFR® grades, and shore D hardness of 25-72 D.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 03, 2008 Loctite® 331(TM) Structural Adhesive is acid-free, 2-step acrylic that fixtures in 20 sec and develops full strength in 30 min, bonding magnets and metals of all sizes. Designed for filling large gaps, Loctite® 3060(TM) Structural Adhesive is acid-free, 2-component, external-mix acrylic featuring 2 cascading adhesive streams that automatically mix together. Loctite® E-220IC(TM) Hysol® Epoxy Adhesive is acid-free, 1-component epoxy designed for induction cure operations.

Scapa North America
Windsor, CT 06095
Apr 02, 2008 Resistant to heat, chemicals, and plasticizers, Ultrafilm(TM) 6300-001 and 6500-001 are designed for sound attenuation, vibration dampening, rubber extrusion mounting, and general product assembly applications. They bond to various surfaces, including ether and ester foams, rubbers, metals, and engineered plastics, and supplied with 4 mil white HDPE liner. Acrylic adhesive used in Ultrafilm 6300-001 and 6500-001 is, respectively, 3 and 5 mils thick.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 02, 2008 Able to eliminate part racking and allow immediate quality control testing, Loctite® 5240(TM) is designed for use on medical devices that incorporate silicone materials or require flexible bond joints or coatings. It cures within 30 sec upon exposure to suitable UV/visible light source or within 24-72 hr at room temperature in shadowed areas. Adhesive meets ISO-10993 requirements and demonstrates tear strengths in excess of 75 lb/in. and elongation of 270% in cured state.

Richco, Inc.
Morton Grove, IL 60680
Apr 01, 2008 Along with 0.701 in. square footprint and easy-release tab on adhesive, PSB series features construction that supports heavily loaded PCBs and facilitates access to underside of PCBs. Each push spacer on adhesive base, available in 6 standoff heights, is RoHS-compliant, made of natural color Nylon 6/6, and available in UL94 V2/0.

Master Bond, Inc.
Hackensack, NJ 07601
Mar 31, 2008 Designed for use in high performance composite structures and potting/casting applications, polyfunctional epoxy resin EP34CA can be combined with hardeners to provide low viscosity liquid which is suited for filament windings. Mechanical properties vs. time/temperature of unidirectional graphite composites based on Modmore Type II T fiber and matrix of EP34CA/EP34C yield flexural strength of 236,000 psi, flexural modulus of 17.8 x 106 psi, and interlaninar shear strength of 12,700 psi.

Teknor Apex Co.
Pawtucket, RI 02861
Mar 28, 2008 Used for intricate or multi-cavity parts like fasteners and for engine cradle nests, Chemlon® 109 provides low-temperature notched Izod impact strength of 4.5 ft-lb/in. at -40°C and flexural strength of 7,000 psi. Featuring high-flow properties, nylon 66 compound can also resist cracking in uses such as protective dunnage or nests for low-temperature storage and shipment of automotive components like fascia and even entire engines.

Sheffield Plastics Inc., A Bayer MaterialScience Co.
Sheffield, MA 01257
Mar 26, 2008 Available in .020, .030, and .040 in. thicknesses and in 51 x 100 in. sheet sizes, VIVAK® features masking only on gloss side. Non-glare satin finish can be printed on sheet's first/second surface with adhesion properties for UV or solvent based inks, while delivering glare-reducing texture. Suited for graphics, point-of-purchase displays/fixtures, indoor signs, and formed parts, sheet has thermoforming abilities and allows die cutting, deeper draws, and punching for thin gauges.

Stratasys, Inc.
Minneapolis, MN 55344 2020
Mar 18, 2008 Suited for medical, food, and pharmaceutical equipment prototyping or production, ABS-M30i is designed for use with FDM 400mc(TM) prototyping and production system. It is FDA compatible, meets ISO 10993 standards, and can be sterilized using either gamma radiation or ethylene oxide (EtO) method. Available in natural off-white color, ABS-M30i parts can be built with 0.005, 0.007, 0.010, and 0.013 in. slices.

TENNANT
Minneapolis, MN 55426
Mar 13, 2008 With VOCs below 250 g/L, WearGuard - CRU(TM) 250 Topcoats meet VOC requirements of LADCO, OTC, and Chemicals Control Branch of Environment Canada. Products offer UV light stability, light reflectivity, and ability to withstand Skydrol®, jet fuels, and other industrial chemicals. Available in white, light gray, and gray, coatings come in 100% aliphatic, non-yellowing formula to maintain appearance over time.

West Development Group
LaGrange, OH 44050
Feb 29, 2008 System 14(TM) is comprehensive roofing solution that delivers complete range of products, including silicone sheet goods, skylight glazing, silicone sealants/coatings, and spray polyurethane foam (SPF) insulation. It features zero VOC coating (HSS 535) applied over soy-based SPF, creating moisture-resistant seal. Silicone topcoat forms self-flashing seal that resists oxidation, wind-driven rain/snow, ozone, and chemicals, and offers resistance to cracking and peeling.

Lapp USA
Florham Park, NJ 07932
Feb 21, 2008 With 20 different tubing and sleeving options in variety of sizes, colors, and lengths, OLFLEX® tubing and cable management solutions suit virtually any application or environment. Products offer insulation as well as chemical and temperature resistance for flexible and non-flexing cable in extreme environments. Offered in shrink ratios of 2:1, 3:1, and 4:1, tubing comes in dual wall, adhesive-lined, permanent bonding, and polyolefin type for liquid tight sealing.