Plating & Treating Baths

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Chilling/Heating Dry Baths hold 64 - 1.5 mL centrifuge tubes.

January 22, 2016

With temperature ranges of -10 to 100°C and -20 to 100°C, respectively, EchoTherm™ Models IC30 and IC30XT can freeze, chill, or heat samples in variety of sample blocks that can hold 0.2–50 mL centrifuge tubes, test tubes, vials, assay plates, and round-bottom flasks. Measuring 8.5 x 10 x 4 in., Peltier-driven units feature digital display and control to 1°C, 30-day countdown timer in hours/minutes/seconds, data logger, and RS232 I/O port to collect data or to control units by computer. Read More

Chemical Processing & Waste Management, Machinery & Machining Tools

TRUMPF Photonics Chooses ClassOne's Solstice S8 Electroplater

November 24, 2015

KALISPELL, Mont. - Semiconductor equipment manufacturer ClassOne Technology (www.classone.com/) announced the sale of its Solstice® S8 Plating System to one of the world's leading semiconductor laser manufacturers, TRUMPF Photonics. The new Solstice S8 will be installed at the TRUMPF facility in Cranbury, NJ, where it will be used for high-precision... Read More

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Chilling and Heating Dry Baths offer remote control.

November 19, 2015

Suited for robotic systems and fume hoods or environmental chambers, EchoTherm™ RHB20 and RIC20 can be controlled by computer or MIC20 Remote Terminal via RS232 I/O ports. Users can set and control temperature of samples in various containers from assay plates to centrifuge tubes from -20.0 to 120.0°C with accuracy to ±0.2°C. When connected to either dry bath, MIC20 can also collect current set point or temperature, set or clear idle mode, and perform calibration. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Chilling/Heating Dry Bath controls exact sample temperature.

October 5, 2015

Supplied with temperature probe that is inserted directly into sample or sample block, EchoTherm™ Model IC50 displays and controls temperature to ±0.1°C. Peltier-driven unit can freeze, chill, or heat samples from -10.0 to 110.0°C in assay plates, centrifuge tubes, vials, test tubes, and most any other sample container. Measuring 65 x 8.75 x 3.5 in., IC50 includes countdown timer, surface hot indicator lamp, data logger, and RS232 I/O port to control unit by computer or to record data. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Fluidized Temperature Bath offers supplementary cleaning solution.

April 24, 2014

Intended for cleaning extrusion tooling and parts, FTBLL12E incorporates analog dial controller for setting bath temperature and gate valve for manually adjusting Fluidizing air. Other features include robust heater, seam welded solid top and inner tank, and fully automatic systems with optimized thermal cleaning performance. This fluidized temperature bath suits companies that have few extrusion lines or companies that want to supplement current cleaning methods. Read More

Chemical Processing & Waste Management, Services, Green & Clean

Engineered Coating can be applied to any metallic substrate.

June 19, 2013

Available for samples/prototypes and part sizes that fit inside 32 in. cube., Boron Nitride Electroless Nickel (BNEN) plating service provides hardness and lubricity. Composite plating process, able to achieve demanding tolerances (.00005–.002 in. thicknesses), suits parts fabricated from aluminum, copper, brass, magnesium, stainless steel, and steel. Coefficient of friction, ability to withstand up to 1,700°F, and abrasion resistance benefit complex assemblies of moving internal parts. Read More

Chemical Processing & Waste Management, Laboratory and Research Supplies & Equipment, Materials & Material Processing, Thermal & Heating Equipment

Digital Chilling/Heating Dry Bath has 2-position design.

August 9, 2012

Comprised of 2 dry baths for biological samples, EchoTherm(TM) Model IC22XT can run 2 separate temperatures from -20 to +100°C and 2 different sample blocks simultaneously. Features include data logger, 30-day count down timer with alarm, and RS232 interface. Compatible with robotic systems, bath can be used with accessory sample blocks for 0.5, 1.5, and 2.0 ml centrifuge tubes; PCR tubes and plates; 96- and 384-well assay plates; vials; and test tubes. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Precision Fluidized Bath has 122 to 1,292°F operating range.

March 9, 2012

Featuring PID temperature control, FFB-8 series employs principle of fluidization of mass of finely divided particles to provide safe, isothermal environment with elevated rate of heat transfer. CE-compliant product is non-abrasive to any devices or parts put into bath, including those that are highly polished, and may also be used as constant temperature environment for chemical reactions. Built-in dust extraction and collection system is standard. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Shaking Chilling/Heating Dry Bath is fully programmable.

September 7, 2011

Intended for use with biological and other samples, EchoTherm(TM) Model SC25XT features 5-program memory and temperature range of -20 to +100°C. Unit employs variable-speed orbital shaker for mixing samples while controlling sample temperature to 1ºC. Additional features include 30-day countdown timer with alarm and Auto-off, data logger, and RS232 I/O port. Peltier driven for chilling and heating, system comes with universal bench top power supply and is UL-, CSA-, and CE-compliant. Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems, HVAC, Materials & Material Processing, Thermal & Heating Equipment, Green & Clean

Heateflex Solar Cell Texturing Process Line of Products

July 7, 2011

ARCADIA, Calif. - Visit Heateflex at booth 9462 at Intersolar North America 2011, taking place in San Francisco, California on July 12-14th.<4444>Heateflex Corporation is the world leader in ultra-pure heating. Heateflex will be featuring a Solar Cell Texturing Tank, as well as the Aquarius® Series Ultra-Pure DI Water Heating System and PFA/PTFE Immersion Heaters at Intersolar North America... Read More

Chemical Processing & Waste Management, Machinery & Machining Tools

Automatic Bacterial Plater provides 25 second cycle time.

March 1, 2010

Intended for microbiological labs, EasySpiral® provides standardized plating with sensitivity from 30 to 10 million CFU/ml on 1 Petri dish without preliminary dilutions for higher lab capacities. System features rotating arm architecture and disinfection system that avoids cross-contamination risks. Meeting AFNOR V08-100 standards, EasySpiral® offers USB-programmable plating volumes from 10-1,000 µl and exports data via Excel and barcode for full traceability. Read More

Chemical Processing & Waste Management, HVAC, Materials & Material Processing

Circulating Baths operate at -40 to +200°C.

October 16, 2008

With 6, 13, or 28 L capacities, Refrigerating/Heating Circulating Baths are offered with choice of controllers. Programmable Controller offers LCD display, ±0.01°C temperature stability, and time/temperature programming, while Advanced Digital Controller has variable-speed pump and RS-232 interface. Featuring 2-speed pump, Standard Digital and Basic Controllers, suited for applications where temperature set points remain relatively static, have stability of ±0.05 and ±0.2°C, respectively. Read More

Chemical Processing & Waste Management, Machinery & Machining Tools

Electroplating System suits utility-scale solar equipment.

July 9, 2008

Operating at continuous speeds up to 30 fpm, METFAB Solar Pipe Electroplating System electroplates metallic coating from 10-100 µin. to the surface of solar thermal power pipes and tubes to optimize heat absorption. Designed for processing tube and pipe from 1-3 in. OD and sheet up to 12 in. wide, it can apply specialty metallic coatings onto wide range of steels and alloys. Customizable aqueous process system includes all controls, electronics, hardware, and tanks. Read More

Chemical Processing & Waste Management, Materials & Material Processing, Thermal & Heating Equipment

Chilling/Heating Dry Bath handles 2 separate temperatures.

July 2, 2007

Two-Position EchoTherm(TM) Model IC22XT can run 2 separate temperatures and 2 different sample blocks simultaneously. Suited for freezing, chilling, or heating biological samples from -20 to +100°C, digital system features built-in data logger, 30-day countdown timer with alarm, and RS232 interface. It can be used with accessory sample blocks for 0.5, 1.5, and 2.0 ml centrifuge tubes, PCR tubes, and plates; 96-well and 384-well assay plates; 2.0 ml vials; and most test tube sizes. Read More

Chemical Processing & Waste Management, Electronic Components & Devices

Rectifier suits chrome-plating industry.

December 5, 2002

Monopolarizer uses combination of electronic devices to provide precise control of electric current used in plating process. It eliminates plating interruptions due to and solves passivation and peeling quality issues due to ripple current. Read More

Chemical Processing & Waste Management, Paints & Coatings, Portable Tools, Services

Metallizer System suits PCB repair and re-work applications.

June 4, 2002

Micro-Metallizer system utilizes disposable marker-type pens based on environmentally friendly plating compounds. System offers bench-top plating convenience, and completely eliminates preparing and handling solutions. Pens can be safely used anywhere. Pens are available in gold, copper, tin, zinc, nickel, black nickel, silver, chrome-color, rhodium, and palladium. Read More

Chemical Processing & Waste Management, Machinery & Machining Tools

Chemical Monitoring System employs CVS technique.

March 6, 2002

Quali-line QLC-6000 provides on-line chemical monitoring for copper electrodeposition process. Automatic system measures organic additives and inorganic components. Cyclic voltammetric stripping (CVS) technique offers logic based features and analysis development. QLC-6000's Microsoft® Windows® based platform supports GUI and touch screen monitors. Read More

  • 1