Bionomic Industries Inc.    Mahwah, NJ 07430
Apr 29, 2013 Unlike typical NOx sulfide/caustic control chemistry, low toxicity BIONOxSOLVER will not liberate flammable and dangerous hydrogen sulfide gas at pH use conditions. Typical applications include removal of nitrogen dioxide emissions from catalyst calcining and preparation, precious metals dissolving, silicon wafer and circuit board etching, nitrite and nitrate chemical production, nitric acid storage and purging, and nitrogen dioxide removal.

Magnetek    Menomonee Falls, WI 53051
Feb 05, 2013 Eliminating need for dynamic braking resistors, AC Line Regenerative Systems take surplus regenerative energy from motor and return it to AC power source, reducing total energy consumption and improving energy efficiency by 40–45%. These industrial grade units are available in 2 types: IMPULSE®•R units are offered with ratings from 5–100 hp, while IMPULSE®•D+ HHP modular, regenerative inverter platform is suitable for applications beyond 200 hp.

Adwest Technologies, Inc.    Anaheim, CA 92806
Dec 06, 2012 Featuring flameless operation, RETOX Dual Chamber RTO Systems provide VOC and odor abatement with corrosion-resistant ceramic heat exchanger rated up to 97% effective primary energy recovery. RTO and wet scrubber units come in skid mounted, prepiped, and wired modules that are available with flowrates from 1,000–8,000 cfm. Flameless natural gas injection operation does not generate any NOx byproducts during odor and VOC combustion and oxidation process.

Adwest Technologies, Inc.    Anaheim, CA 92806
Aug 22, 2012 Provided in skid-mounted, prepiped and wired modules, Flameless RETOX Regenerative Thermal Oxidizers feature flow rates from 1,000-80,000 cfm and are suited for dust and particulate laden VOC processes. Units provide 99% VOC abatement with dual chamber, corrosion-resistant ceramic heat exchanger rated up to 97% effective for primary heat recovery. Flameless natural gas injection operation does not generate any NOx byproducts during VOC combustion and oxidation process.

Airgas    Radnor, PA 19087
Aug 01, 2012 Used for reclamation of used refrigerant gases, Airgas Refrigatron(TM) system streamlines movement, analysis, evacuation, and storage of contents from returned gas cylinders. Multiphase system can reclaim used refrigerant gases to 99.8% purity, facilitating resale efforts. Using 2 zero-gravity lifts to move cylinders and 2 in-line gas chromatograph mass spectrometers, system renders ARI-700 specification result and records it for labeling and future use.

Fortrans Inc.    Wendell, NC 27591
Jul 23, 2012 Designed to deoxidize and brighten aluminum surfaces, Safe-Bright(TM) is non-regulated by DOT and carries HMIS code 1. Product will not attack or etch glass and is safe to use on painted surfaces, chrome-plated hydraulic rams, plastic, and rubber seals. Formulated with no hydrochloric acid, Safe-Bright does not produce corrosive fumes or vapors and is very low odor. Product is useful for removing hard water and acid rain staining from painted surfaces.

Maguire Products, Inc.    Aston, PA 19014
Jan 09, 2012 Featuring 2-stage operation, Purging Recovery System(TM) first slices or planes rock-like purgings into small pieces, then reduces pieces to uniform regrind. System is applicable to flexible vinyl, which stretches when worked by cutting blades and can jam conventional granulators. In addition, system can process shear-sensitive polymers like polystyrene, which can melt as frictional heat builds up in standard equipment.

Vanton Pump & Equipment Corp.    Hillside, NJ 07205
Nov 01, 2011 Featuring non-metallic design, Mobile Pump/Tank Cart transfers wastewater and caustic/acid chemicals with no corrosion and ultrapure fluids with no contamination. All fluid contact surfaces are solid polypropylene, polyethylene, PVC, or other inert thermoplastic. Utilizing rotor mounted on eccentric shaft, self-priming Flex-I-Liner® CC-PY12B pump pushes fluid trapped between elastomer liner and solid thermoplastic body block at flows to 2 gpm, pressures to 25 psig, and temperatures to 185°F.

Adwest Technologies, Inc.    Anaheim, CA 92806
May 19, 2011 Featuring flameless operation, RETOX Regenerative Thermal Oxidizer systems provide 99% VOC abatement with dual chamber ceramic heat exchanger rated up to 97% effective primary heat recovery. Units come in skid-mounted, pre-piped and wired modules with flowrates from 1,000-80,000 cfm. RTO operation does not generate any Nitrous Oxide byproducts during VOC combustion and oxidation process. Systems also do not require periodic carbon or catalyst replacement and maintenance.

Bematek Systems, Inc.    Salem, MA 01970
Feb 25, 2011 Used for in-line multi-component process development, Laboratory Pilot Mixing System can combine multiple streams of fluids into homogeneous emulsions, dispersions, and blends. Integrated rotor-stator mixing technology exposes 100% of mixed product to same shear action without bypass. Fully scalable, wet-mix process systems are FDA-, USDA-, and 3A-compliant and can produce dispersions down to 1 micron with ±1% repeatability. They mix and blend viscous materials from 1.0 CPS and up.

FIPA, Inc.    Atlanta, GA 30318
Jan 28, 2011 In addition to portable units for vacuuming cooling/lubricating agents, VZ series includes stationary units for vacuum supply of bulk consumers. Unit consists of up to 3 oil-lubricated vacuum pumps, one reservoir tank, one control unit, and necessary system peripherals. Vacuum degree is rated up to -990 mbar, and respective flow rates for portable and stationary modes are 4-60 and 25-915 m³/h. Tank capacities range from 8-25 L for portable and 100-1,000 L for stationary models.

Graver Technologies    Glasgow, DE 19702
Dec 07, 2010 Available as individual elements or as pre-assembled tube bundles, Aegis PowerGuard® Septa fits original Graver bottom tube sheet installations with OEM-supplied nuclear adapter end fittings. Poroplate® sintered metal design allows for precise control of porosity from 2-200 microns. Providing resistance to corrosion and fatigue, backwashable 316L stainless steel septa features collapse strengths over 400 psid and operating temperatures up to 1,000°F.

Mech-Chem Associates, Inc.    Norfolk, MA 02056
Oct 29, 2010 Designed for recovery and recycling of industrial acids, laboratory-sized Acid Purification System uses diffusion dialysis to separate, recover, and purify strong acids from spent acid solutions contaminated with dissolved metals. Purified acid is returned to process tank for continued use, while concentrated metal-containing aqueous solution is removed for waste treatment. Typically, 80-90% of initial process acid is recovered in 1 pass through system with 70-90% removal of dissolved metals.

Engineered Concepts, Llc    Farmington, NM 87499
Oct 27, 2009 Vapor recovery system alternative (VRSA) is designed for effective and reliable capture of tank vapors. Virtually eliminating flaring and venting, scalable system monitors and controls compressor, tank, and process. Capture of rich vapors helps increase operator profits while eliminating known emissions associated with natural gas production. System can also produce ROI on well pads producing as low as 50 Bbl of condensate per day.

Eriez Magnetics    Erie, PA 16506
Oct 26, 2009 Offering responsible method for safe recovery and recycling of e-scrap materials, multi-stage EcoTowerSort(TM) can be used for sorting of aluminum, stainless steel, copper cables, and heavy fractions. Machines are available in widths of 24-118 in. with choice of bottom or top blowing discharge designs. Utilized within vertically stacked system, modular sorting technologies can include rare earth drum separators, eddy current separators, inductive sensor sorter, or any combination thereof.

Newstripe, Inc.    Aurora, CO 80011
May 21, 2009 Accommodating up to 3 aerosol cans, AEROVENT 3 punctures and drains them in less than 10 sec. It has non-sparking design that includes cobalt piercing tips and anti-static grounding cable. Unit totally encloses cans being punctured, ensuring operator safety, while vent filter eliminates VOC and hydrocarbons from being released into atmosphere and being inhaled by operator. After being processed in unit, cans can be recycled as scrap steel or discarded as regular trash.

Koehler Instrument Co., Inc.    Bohemia, NY 11716
Mar 05, 2009 Heated Oil Test Centrifuge incorporates LCD touchscreen control panel that can be used to govern centrifuge rotation speed, turn heat on/off, set duration of test, and choose type of rotor assembly and corresponding glassware to be used during test. Manufactured to meet Class 1, Division 2 explosion resistant rating, system conforms to range of Standard Test Methods and features top-opening lid that provides access to rotor and tube holders and features 18½ in. dia viewing window.

Belmont Metals, Inc.    Brooklyn, NY 11207
Mar 02, 2009 Produced in small prototype (research) quantities, custom metallurgical alloy products and shapes are available from metal bases - aluminum, copper, nickel, tin, and zinc - for casting, chemical processes, and plating. Alloy compositions are verified throughout manufacturing cycle with spectrographs, utilizing NBS traceable standards. Along with standard formulations, shapes, and sizes, special formulations requiring adjustment of compositions and forms can also be accommodated.

Opw Engineered Systems    Lebanon, OH 45036
Feb 02, 2009 Used at major oil terminals, Model 1004D3 API Bottom-Loading Coupler features 5-cam design that ensures alignment, tight adapter connections, and resistance to side forces while loading. Dual interlocks ensure that coupler cannot be opened unless it is properly connected to API adapter. Other features include dual O-rings, Viton(TM) seal compound that is compatible with most petroleum products, and nose seal that can be replaced without removing coupler from rack.

Mono Nov Group    Manchester M34 5JA  United Kingdom
Jun 18, 2008 With capacity of up to 16,000 m³/hr, Discam can capture up to 95% of solids at 5 or 9 mm aperture sizes. It combines self-cleaning Discreen® with high torque Muncher, requiring no manual attendance/cleaning, and features high-flow side rail which increases fluid velocity through Muncher. Available in range of channel depths with 1,000, 1,500, and 2,000 mm options as standard, unit can be retrofitted into existing sewage pump stations or inlet works, as well as installed in new build facilities.