Meadows, W.R., Inc.
Hampshire, IL 60140 0338
Jun 15, 2009 Supplied as colorless liquid, LIQUI-HARD ULTRA penetrates into concrete surface, where chemical reaction takes place that produces byproduct that fills in pores of concrete at molecular level. Finished surface offers abrasion and chemical resistance and is more durable than that of untreated concrete. LIQUI-HARD ULTRA is environmentally safe, water-based product and features zero VOC content.

Komar Industries, Inc.
Groveport, OH 43125
May 20, 2009 Suited for construction and demolition sites, EM-PSC Auger shreds and compacts everything from pallets to white goods to dry wall to cement blocks. Electro-mechanical unit, equipped with 100 kW generator, is mounted on roll-off machine bed. Its 7.4 yd³ hopper accepts most kinds of construction debris, and 40 hp electric motor drives auger screw that shreds/compacts with 178,000 lb-ft of force. Unit fills 40 and 50 yd³ roll-off containers with typ loads of 8-14 tons.

Compaction America, Inc.
Kewanee, IL 61443 1714
Apr 17, 2009 BOMAG BC472RB is 52,900 lb compactor featuring PAKALL wheel design that uses 4 polygonal compaction rings and 40 teeth/wheel to eliminate air voids by shredding and crushing material. Hydrostatic drive system, powered by 255 hp diesel engine, transfers power/torque to wheels. Featuring sealed frame and hubs to prevent debris entry, unit also has scraper bars/wire cutters to protect wheels, central lubrication system, and cab, rated at 74 dB, with heating and air conditioning.

Orwak USA LLC
Shelton, CT 06484
Aug 20, 2008 Featuring twin chamber design, Orwak 5040 employs dual-phase PET bottle compaction involving perforating needles. Compaction ratio for PET bottles is up to 10:1, and one bale of PET contains 350-500 bottles. Machine also makes stackable compact bales of aluminum cans, without any tying needed to keep bales together. One bale of 35 cl cans contains ~650 cans, and compaction ratio is 6:1. Compactor produces 400 x 400 mm bales, adjustable from 350-550 mm in height, that weigh 10-14 kg.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 02, 2008 Suited for work on granular, cohesive, and mixed soils, models BPR35/60 and BPR35/60D are respectively powered by fully enclosed 5.4 hp Honda air-cooled gas engine and 4.16 hp Hatz air-cooled diesel engine. Vibratory exciter design lends to working speed capabilities, as well as gradeability, on all types of soil. Both models have max vibration frequency of 4,800 vibrations/min and heavy-duty, wear-resistant base plates with reinforced edges and working width of 23.6 in.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 01, 2008 Measuring less than 16 in. wide, BPR25/40 series is optimized for maneuverability and centrifugal force. Honda 5.36 hp air-cooled gas engine powers BPR25/40, while Hatz 4.15 hp air-cooled diesel engine powers BPR25/40D. Featuring max frequency of 5,100 vibrations/min, both are suited for work on granular material as well as cohesive and mixed soils in landscaping, site prep, and other mid-size applications. Features include vibratory exciter design and nodular cast iron base plate.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 01, 2008 Featuring one 47 in. drum, BW124DH-40 smooth drum roller and BW124PDH-40 padfoot roller are powered by Tier 3 Deutz diesel engine and offer all-around visibility. Centrifugal force and amplitude are optimized for compacting granular and mixed soils as well as semi-cohesive and cohesive materials. While no-spin rear differentials and standard drum drive achieve optimal gradeability, bolt-on articulation joint optimizes maneuverability and drum contact on irregular terrain.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Jun 03, 2008 Intended for for heavy prison and institutional wastewater applications, Spiralift® SLX screens, washes, conveys, and compacts wastewater solids in one integrated system. System includes 15 hp TASKMASTERR TM1630 shredder, screen, solenoid valve, spray wash manifold, level sensor, and PLC-based control system in NEMA 4x enclosure for effectively handling concentrated solids including clothing, sneakers, sheets, blankets, wood, and other debris that clog and cause backups.

Doosan Infracore American Corporation
Suwanee, GA 30024
May 13, 2008 DX-600H vibratory compactor has 14 in. drum diameter, 25 in. drum width, and operating weight of 1,345 lb, while model DX-700H has 16 in. drum diameter, 25.5 in. drum width, and operating weight of 1,565 lb. Machines feature hydrostatic propulsion system, which allows operators to vary rolling speed to meet application demands. Both offer curb clearance of 9.7 in. and side clearance of 1.02 in. They include fold-up handles, center-mount lifting hook, and automatic shut off.

Newstripe, Inc.
Aurora, CO 80011
Mar 26, 2008 Pack-Master in-drum compactor is suited for disposing of or recycling materials such as paper, paint booth filters, aluminum cans, absorbents, and disposable clothes. Manually operated machine generates 4,000 lb of force for compaction ratio of up to 4-to-1. It is manufactured from structural steel and compacts drum of material via operation of ram lever. Accessories include roll-out base, split barrel for compacting waste in disposable liners, and sorbent basket.

Kurt Manufacturing
Minneapolis, MN 55421
Jan 18, 2008 With output capacity up to 1,200 lb/hr of aluminum chips, Chipmunk 1200FL compacts ferrous and non-ferrous chips into dense 3½ x 1¼ in. briquettes. It can also compact steel/ductile iron chips at rate of 2,300 lb/hr. Producing up to 50,000 psi compaction force, Model 1200FL transforms metalworking chips into dense, dry pucks. Front-load design utilizes hydraulically driven infeed auger, which separates most unwanted solids from chips prior to compacting.

Franklin Miller Delumper Mixer Div.
Livingston, NJ 07039
Aug 24, 2007 Designed to clean, condition, wash, and compact screenings, SPIRALIFT® SC Screenings Conditioner features freestanding configuration that can fit into tight plant locations. Screenings are received from bar screen in SC hopper, finely ground by heavy-duty TASKMASTER® grinder, and spray washed. Solids drop into second washing zone for intensive washing under high pressure and are transported to screw press where liquids and contaminants are drained and solids are compacted.

Marathon Equipment Co.
Vernon, AL 35592
May 18, 2007 Available in 4 models covering 200-2,400 lb/hr throughput range, Prospector(TM) Wire Processor reclaims copper and aluminum from scrap electrical wire. Each unit is comprised of granulation chamber with hopper, 3 rotating knives, and 2 stationary knives. Enclosed air-flow system brings chopped material to separation chamber, where copper and aluminum is dry-separated from plastic, PVC, or other insulation for clean, high-value No. 1 chops.

Newstripe, Inc.
Aurora, CO 80011
Mar 26, 2007 Pack-Master generates 4,000 lb of force to aid in disposal or recycling of materials such as paper, paint booth filters, aluminum cans, absorbents, and disposable clothes. Manufactured from structural steel, unit is manually operated and has compaction ratio of up to 4:1. Pack-Master is also available in air-powered and air-powered, spark-resistant models with accessories such as Roll-out Base, Split Barrel, Sorbent Basket, and Wheel Kit.

Royal Pak Systems
Hackensack, NJ 07602
Mar 06, 2007 Designed for installation at bottom of trash chute, heavy-duty Krusher Series is comprised of 3 models, including Royal-Krusher with capacity of 32,000 lb/24 hr, Econo-Krusher for 37,000 lb/24 hr, and King-Krusher for 68,000 lb/24 hr. Units are fully automated and equipped with manual safety shut off gate, emergency stop switch, door safety switch, and automatic fire system. Trash is sealed in containers or heavy-duty plastic bags for more hygienic collection.

Komar Industries, Inc.
Groveport, OH 43125
Mar 01, 2007 Electro-mechanical Komar EM Auger Compactor shreds and compacts corrugated waste directly into receiving bin at the rate of 2,000 lb/hr. Tapered auger screw compacts with compression rate up to 218,300 psi, generating corrugated payloads of 22,000 lb in 40 yd containers. Machines feature solid forged alloy shafts and high capacity roller bearings and are offered in .75-9 cu yd charge capacities with selection of open feed hoppers, enclosed plug-in dock hoppers, and chutes.

Precision Airconvey Corp.
Newark, DE 19702
Dec 22, 2006 Featuring built-in temperature sensor that prevents startup until optimum temperature has been reached, WastePAC Densifier(TM) automatically converts plastic film, foil, poly-coated paper, and other waste material into rigid bricks ranging in adjustable size from 4 in. to more than 8 ft long. Unit compresses both clean and post-consumer material with 40:1 compaction ratio, transforming up to 333 cu-ft of material into single brick suitable for transport over road or overseas for reprocessing.

Stone Construction Equipment, Inc.
Honeoye, NY 14471
Oct 20, 2006 Suited for compaction of sand, gravel, aggregates, and mixed soils, Model RP1130 combines 11,240 lb of impact force with speeds up to 72 fpm. It delivers max productivity of 8,500 sq-ft/hr with compaction lifts up to 27 in. Featuring hydrostatic drive and hydrostatic exciter, unit provides quick direction changes. Triple exciter system optimizes infinite hydraulic forward and reverse travel. Plate has working width of 24 in. and is powered by 9.5 hp Hatz diesel engine.

Kurt Manufacturing Co., Industrial Products Div.
Minneapolis, MN 55413 1540
Jun 05, 2006 Utilizing 30 hp main motor, Model 1200 Chipmunk compacts up to 1,200 lb of chips per hr. High-volume system produces dense aluminum chips with its 8:1 compaction ratio. Aluminum material and coolant are saved, as is floor space for storing and handling scrap and coolant. Machine is suited for small- and large-scale chip producing operations.

American Baler Co.
Bellevue, OH 44811
May 30, 2006 Using twin motors to produce dense bales without heavy power usage, HS8543 has rated production capacity exceeding 50 tons and 46,000 ft³ per hr. Floating tension force allows baler to adjust automatically to unique requirements of changing materials, while 8 spring-loaded retainer locks restrict bale spring back and minimize rooster tails. Auxiliary functions, such as auto-tier, fluffer door, and oil filtration, are driven by separate dedicated motor to conserve energy.