EXAIR Corporation
Cincinnati, OH 45249-1621
Jun 10, 2008 Utilizing SS 2-way pump that is suited for use with most non-flammable liquids, Mini Reversible Drum Vac System can vacuum coolant, hydraulic oils, spills, sludge, tramp oil, and waste water; then pump it back out for disposal, storage, or reclamation. Compressed air powered unit has no moving parts such as motors or impellers to clog, freeze up, or wear out. With air consumption of 19 scfm at 80 psig, it features automatic safety shut-off valve to prevent overfilling.

Air Logic
Racine, WI 53402
May 22, 2008 Vacuum Generator model V-4417-10 produces low-flow (1 scfm) vacuum using venturi principle. It converts compressed air to vacuum, consuming 4.9 scfh with 13 psi supply. Vacuum range is 0-15 in. Hg with 13 psi supply pressure, and max supply pressure is 20 psi. Along with recommended filtration of 5 microns, product features straight ports for 1/16 in. ID tubing, Polysulfone housing, and vinyl cap for covering unused output port.

Dekker Vacuum Technologies, Inc.
Michigan City, IN 46360
May 05, 2008 Consisting of 2, 3, or 4 simplex oil-sealed liquid ring pumps, VmaxVFD systems are microprocessor-controlled and conserve energy by automatically adjusting pump speed to match varying vacuum demand. This also eliminates frequent stop-starts and promotes stable vacuum levels. Separately located variable frequency drive (VFD) main control panel provides single location for system control and aggregating alarm outputs for remote monitoring.

Gardner Denver
Quincy, IL 62301
May 01, 2008 Offering 2-stage diaphragm mechanism with ultimate vacuum to 1.5 Torr, Welch® VARIFLOW(TM) Vacuum Pumps can be used for full chemical- and standard-duty operation in OEM and laboratory applications. Chemical Duty Model 8115D-20 uses PTFE heads/diaphragms and FKM valves, while Standard Duty Model 8115D-25 uses aluminum heads and EPDM diaphragms/valves. All models use 24 V brushless dc motors with maximum power consumption of 85 W and can restart under vacuum.

Thomas Products Division
Sheboygan, WI 53081
Mar 11, 2008 With dimensions of 4.25 x 4.63 x 3.02 in. and weighing 2.5 lb, 260 Series WOB-L® air compressor and vacuum pump is designed for medical and other applications requiring small size and light weight pump with variable output. Integral brushless dc motor, enclosed crankcase, and WOB-L® piston technology allow for variable output from 1,000-3,000 rpm. Other specifications include max flow of 1.5 cfm, max pressure of 30 psig, and max vacuum of 22 in. Hg.

Thomas Industries, Inc.
Sheboygan, WI 53082-0029
Mar 11, 2008 Measuring 4.25 x 4.63 x 3.02 in. and weighing 2.5 lb, 260 Series brushless DC WOB-L® air compressor and vacuum pump is designed for medical and other applications requiring lightweight pump with variable output. It utilizes efficient brushless DC motor, enclosed crankcase, and WOB-L® piston technology. With maximum flow of 1.5 cfm at high speed, pump also offers maximum pressure of 30 psig and maximum vacuum of 22 in. Hg.9

Thomas Products Division
Sheboygan, WI 53081
Mar 04, 2008 Measuring 4.25 x 4.54 x 3.02 in. and weighing 1.9 lb, Series 250 WOB-L® air compressor and vacuum pump delivers variable output from 1,000-3,000 rpm utilizing brushless DC motor, enclosed crankcase, and WOB-L® piston technology. Unit features max flow of 1.0 cfm, max pressure of 30 psig, and max vacuum of 22 in. Hg.

Edwards Vacuum Technology
Wilmington, MA 01887
Feb 26, 2008 Featuring modular design, iXH series of vacuum pumps meets increasing demands of emerging processes required for semiconductor manufacturing at 60 nm and smaller design rules. Gas Buster(TM) inlet purge helps deal with process byproducts and minimize system maintenance and Active Utility Control (AUC) includes idle mode for periods when pump is not in use. Pump mechanism can handle hydrogen and also withstands corrosive effects of ammonia.

Edwards Vacuum Technology
Wilmington, MA 01887
Feb 01, 2008 Combining turbomolecular and drag stages with fluid dynamic stage, EXT406PX allows customers to build compact vacuum systems capable of withstanding high backing pressures even with continuous gas loads at main inlet. It can sustain normal operation at backing pressure of up to 17 mbar and has protection against mains variation on backing pump. System is available in 2 ranges: ISO and CF 160 with nitrogen pumping speeds of 400 L/sec and ISO and CF 100 with pumping speeds of 310 L/sec.

Anver Corp. - Anver.Com
Hudson, MA 01749
Jan 23, 2008 Anver FT Series Adjustable Flow Tubes use 3-9 scfm of compressed air to produce optimal vacuum and exhaust flow, variable from 18-145 scfm, and are available in 4 sizes. Precision machined from aluminum, explosion-proof products do not require O-Rings or gaskets and have straight-thru bore that lets material pass without clogging. They provide instant on/off and are designed to attach to 1, 1½, and 2 in. hose in various cooling/drying, removal, and feeding applications.

Vac-U-Max
Belleville, NJ 07109
Jan 15, 2008 Using cartridge filter to protect pump, VAC-U-MAX PD Pump Packages exhibit smooth and quiet operation and are available from 3-100 hp. They come with cartridge filter, OSHA-approved belt guard, Glycerin-filled vacuum gauge, silencer, and high-vacuum relief valve. Suited for existing vacuum conveying systems or central vacuum cleaning systems, packages are also offered with options such as differential pressure switch and sound enclosures.

Atrix International, Inc.
Burnsville, MN 55337
Jan 10, 2008 Omega Series IPM (Integrated Pest Management) vacuum comes standard with HEPA cartridge filter or with optional ULPA cartridge filter, 9 ft clear safe hose, ESD safe 19 in. rubber flexible gooseneck, crack and crevice tool, along with two 20 in. extension wands, 25 ft power cord, and shoulder strap. Vacuum runs on 110 or 220 V, weighs 11 lb, and can be used to safely reach in and behind sensitive electrical components, wall boards, rafters, or other hard-to-reach places.

Edwards Vacuum Technology
Wilmington, MA 01887
Dec 27, 2007 Facilitating maintenance, cleaning, and waste disposal, oil-free Dry Pumping System consists of HV30000, SN7000, and IDX1000 pumps arranged in 3 stages, pre-mounted, piped, and fully wired on 2-part skid. Each skid is nominally capable of vacuum degassing 23 tons of steel, so numerous skids can be mounted in parallel and integrated with steel degassing tank to suit required ladle sizes, typically up to 160 tons or more.

Edwards Vacuum Technology
Wilmington, MA 01887
Dec 11, 2007 Rated at 2,200 L/sec, iXA(TM) series of turbomolecular vacuum pumps exhaust process gases from physical vapor deposition, etching, chemical vapor deposition, or ion implant equipment in semiconductor, flat panel display, solar energy, and industrial glass coating applications. Pump includes 5-axis magnetic bearing system and RS232/485 (Profibus) serial communication interfaces. Unit features power supply and control modules that can be mounted in various configurations directly on pump.

CDCLarue Industries, Inc.
Sand Springs, OK 74063
Oct 26, 2007 CDCLarue(TM) Series of dust vacuums have fully automatic non-clogging filtration system that internally flushes filters clear during operation using only vacuum and ambient air. PTFE coated S.B.P. twist on filters eliminates dust particles as small as .1 micron. Features include steel dolly that has five 3 in. non-marking, conductive caster wheels, two handles that assist in dumping and moving tank, and microprocessors in PC Board that are designed for Pulse-Bac® filtration system.

HullVac Pump Corp.
Ivyland, PA 18974
Sep 25, 2007 Capable of reaching ultimate pressures of 5 x 10^-3 torr, HVC 180 2-Stage Rotary Piston High Vacuum Pump is manufactured with redundant Viton® shaft seals that ride on hardened shaft sleeves to guard against leakage. It includes outboard bearings, exhaust valve decks, large oil sight port with visual oil flow indication, caged hinge bars, and heavy-duty shaft.

Vaccon Co., Inc.
Medfield, MA 02052
Aug 24, 2007 Suited for pick-and-place applications, Modular Venturi Vacuum Pumps and end-of-arm tooling components mount to 1 and 1.5 in. extrusion to create complete wrist-down end-of-arm tool. Available in 7 models ranging from 2.5-8.5 in., pumps offer 3 performance levels. Model L ranges from 0-10 in. Hg for low vacuum/high flow applications, while Model M ranges from 0-20 in. Hg for med vacuum/high flow, and Model H ranges from 0-28 in. Hg for high vacuum/standard flow applications.

KNF Neuberger, Inc.
Trenton, NJ 08691-1810
Aug 06, 2007 Available in compressor or vacuum pump models, Model NPK04 can be operated in any position and can be used as air/gas transfer pump in medical applications. Sealed, swing piston moves media oil-free and without adding contamination. Featuring 3.3 lpm of free flow, pump provides max vacuum of 21.6 in. Hg or max pressure of 31 psig. Maintenance-free unit utilizes standard dc or brushless dc motor, exhibits low vibration, and is suited for mobile, battery-powered applications.

Ross, Charles, & Son Co.
Hauppauge, NY 11788 0615
Jul 03, 2007 Designed for operation under vacuum to 29.5 in. hg, horizontal Vacuum Paddle Blender features 100 cu-ft working capacity and 110 cu-ft full holding capacity. All wetted parts are 304 SS and polished to 120-grit finish to assist in cleaning between mixes and color changes. Unit includes pneumatically operated, flush-type plug valve that eliminates dead spaces within mix zone.

Varian, Inc.
Palo Alto, CA 94304
Jun 28, 2007 Model IDP-3 low noise, low power pump is suited for applications such as analytical instrumentation, high energy physics, semiconductor fabrication, and industrial processing. With hermetic design in which motor and bearings are outside vacuum space, it allows full isolation of all pumped gases and minimizes possibility of catastrophic failures. Measuring 14 x 7 x 6 in., pump has pumping speed of 60 L/m and low base pressure of less than 250 mTorr.