Nitrogen Generators

Chemical Processing & Waste Management, Mining, Oil Drilling & Refining

Linde to Highlight Equipment and Services Proven to Enhance Oil Exploration, Production and Distribution at URTeC Meeting in Texas

July 27, 2016

BRIDGEWATER, N.J. - Linde's broad range of services designed to enhance oil and gas exploration, production and distribution will be the main topics Linde experts will discuss at this year's Unconventional Resources Technology Conference (URTeC). The meeting will be held at the Henry B. Gonzalez Convention Center in San Antonio, Texas, August 1-3. Linde LLC's Oil Gas Services... Read More

Chemical Processing & Waste Management, Materials & Material Processing

Air Products to Feature Nitrogen and Oxygen Supply Systems for Laser Assist Gas at LME 2016

April 26, 2016

LEHIGH VALLEY, Pa., - Air Products (NYSE: APD) understands that a reliable assist gas supply is critical to keep a laser cutting operation running without interruption. For this reason, the company offers a full spectrum of nitrogen and oxygen assist gas systems, which the company will feature at the Lasers for Manufacturing Event (LME) 2016 in Atlanta from April 26-27. Laser operators are... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Materials & Material Processing

SCF Delivery System supports large molding applications.

April 18, 2016

Designed for foaming of large injection molding applications >2,500–12,500 g, MuCell® T-400 Series Super Critical Fluid Dosing and Delivery System is capable of delivering 50 g of nitrogen in 45 second cycle and is intended for molding machines with screw sizes greater than 90 mm. System produces gas on demand only, minimizing energy consumption and maximizing booster pump life. Equipped with 15 in. touchscreen GUI, system only requires shot size and percentage of SCF content for setup. Read More

Chemical Processing & Waste Management, Materials & Material Processing

Air Products Introduces PRISM® Pro-Line Nitrogen Generator GEN1

February 18, 2016

Product Design Optimized for High-Spec Nitrogen Systems LEHIGH VALLEY, Pa., – Air Products AS, a wholly owned subsidiary of Air Products (NYSE: APD) located in Kristiansand, Norway, has introduced the PRISM® Pro-Line Nitrogen Generator GEN1, the latest offering in its high-spec equipment portfolio. The Pro-Line system is designed to meet the exacting standards of the marine, offshore, and... Read More

Chemical Processing & Waste Management, Materials & Material Processing, Services, Green & Clean

PEMEX Extends Contract for Nitrogen Supply with Linde

January 15, 2016

• Contract runs through 2027 • Largest nitrogen plant in the world: Linde now supplies 1,500  million cubic feet per day for enhanced oil recovery (EOR) in the Gulf of Mexico Murray Hill New Providence, New Jersey, U.S. – The technology company The Linde Group has signed a contract with Pemex Exploración y Producción (PEP), a subsidiary of Petróleos Mexicanos (PEMEX), to extend... Read More

Chemical Processing & Waste Management, Material Handling & Storage, Materials & Material Processing

Linde will Highlight Nitrogen Capabilities for Oil and Gas Production at Coiled Tubing & Well Intervention Conference and Exhibition

March 13, 2015

Murray Hill, New Jersey, U.S. – Linde North America will be featuring its nitrogen supply and storage capabilities at the Coiled Tubing Well Intervention Conference Exhibition to held in The Woodlands, Texas, March 24-25, 2015. The conference is sponsored by The Society of Petroleum Engineers (SPE) and the Intervention & Coiled Tubing Association (ICoTA). "Linde provides high-quality... Read More

Chemical Processing & Waste Management, HVAC, Materials & Material Processing

Linde Plastics Technology Can Cut Costs and Slash Cycle Times

February 20, 2015

Gas-based solutions for injection molding, extrusion foaming, coating prep Murray Hill New Providence, N.J., U.S. – Linde LLC is helping plastic injection molders reduce cycle times, increase production and solve hot spot challenges with advanced carbon dioxide (CO2) or liquid nitrogen supply and control systems, featured at NPE 2015 in Orlando, Fla., March 23-27.   Linde will also... Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems, Green & Clean

AFC-Holcroft Retrofits Tier One's Generators for New Gas Supply

July 9, 2014

A global Tier One automotive supplier has placed an order with AFC-Holcroft for a production gas modernization project involving the purchase of new multiple-retort E-Z Series endothermic generators. The facility receiving the equipment is located in Mexico. The E-Z Series endothermic generators will provide the customer with a lower cost gas production option than their existing nitrogen/... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Materials & Material Processing, Mining, Oil Drilling & Refining, Green & Clean

GE Oil & Gas Awarded $147 Million Contract to Support Statoil's Snøhvit Field Carbon Dioxide Injection Project

June 28, 2013

GE Subsea Technology to Secure Future CO2 Injection at the Snøhvit Gas Field in Barents Sea GE Oil & Gas Facilities in the U.K. and Norway to Deliver Complete Subsea System BERGEN, NORWAY – GE Oil & Gas (NYSE: GE) today announced it has been awarded a $147 million engineering, procurement and construction (EPC) contract from Statoil. Under the contract, GE will supply subsea production... Read More

Chemical Processing & Waste Management, Laboratory and Research Supplies & Equipment, Waste Handling Equipment, Green & Clean

Air Products to Feature Volatile Organic Compounds Recovery System for the Chemical Process Industry at ChemInnovations 2012

November 21, 2012

LEHIGH VALLEY, Pa. - Air Products (NYSE:APD) will highlight the environmental and operational benefits of its Cryo-Condap® nitrogen condensation system for the recovery and abatement of volatile organic compounds (VOCs) at the 2012 ChemInnovations Conference & Exhibition in New Orleans, La., from November 14-15. This proprietary cryogenic technology is one of several industrial gas solutions... Read More

Chemical Processing & Waste Management, Electrical Equipment & Systems, Green & Clean

Air Products to Highlight Oxygen Supply for Ozone Generation and Wastewater Treatment at WEFTEC

September 25, 2012

Company's PRISM® Onsite Gas Generation Systems Enable Camden County Municipal Utilities Authority to Improve Energy Efficiency and Lower Costs<4444>LEHIGH VALLEY, Pa. - Air Products (NYSE: APD) will exhibit its broad portfolio of gases, equipment, and technology solutions for the water and wastewater treatment industry at the 85th Annual Water Environment Federation Technical Exhibition and... Read More

Chemical Processing & Waste Management

ACD Acquires a PSA N2-GEN® Series Pressure Swing Adsorption Nitrogen Generator

August 13, 2012

RICHARDSON, TX - ACD, a leading supplier to the electronics industry, recently installed a PSA N2-GEN® Series Pressure Swing Adsorption (PSA) Nitrogen Generator from South-Tek Systems. Dee Claybrook of Southwest Systems Technology, Inc. assisted with the purchase of the system, which will enable ACD to reduce its Nitrogen costs by up to 90 percent.<4444>The South-Tek Systems' N2-GEN® C Series... Read More

Chemical Processing & Waste Management

Nitrogen Generators offer plug-and-play operation.

April 28, 2009

Suited for reflow, wave, or specialty soldering applications, EconoGen Nitrogen Generators consist of 2 filter beds of carbon molecular sieve. While pre-heated compressed air enters bottom of first bed and passes across sieve, oxygen and trace gases are preferentially absorbed as nitrogen is allowed to pass though to enter low-pressure storage tank. As one bed becomes saturated, second bed automatically activates and takes over separation process. Read More

Chemical Processing & Waste Management

Nitrogen Generators suit sample concentrators/evaporators.

December 9, 2008

Requiring less than 1 sq-ft of bench space, NitroVap-1LV and NitroVap-2LV produce over 320 lpm of pure evaporation grade nitrogen. Non-electrical, miniature units can be bench- or wall-mounted, and supply over 100 evaporator nozzle positions. Existing laboratory compressed air utility is filtered by coalescing filters, which remove all contaminants down to 0.01 micron. Hollow fiber membranes then separate clean air into concentrated nitrogen stream and oxygen enriched permeate stream. Read More

Chemical Processing & Waste Management

Nitrogen Generator produces 99% pure nitrogen.

December 9, 2008

Utilizing combination of compressors, filtration, and membrane separation technologies, self-contained NitroFlowLab produces 99% pure nitrogen with pressures up to 116 psig. High and low pressure compressors, matched to hollow fiber membranes, separate clean air into concentrated nitrogen stream and oxygen enriched permeate stream. Applications include nebulizer gases, source gases, chemical and solvent evaporation, instrument purge and supply, and sparging. Read More

Chemical Processing & Waste Management

Nitrogen Generators suit sample concentrators/evaporators.

January 10, 2008

Including Models Nitrovap-1LV and Nitrovap-2LV, Balston® NitroVap nitrogen generators produce over 350 Lpm of pure evaporation grade nitrogen. Non-electrical bench or wall mounted units require less than 1 ft² of bench space and can supply over 100 evaporator nozzle positions. Nitrogen is produced by utilizing combination of filtration and membrane separation technologies, and coalescing filters remove all contaminants down to 0.01 micron. Read More

Chemical Processing & Waste Management, Mining, Oil Drilling & Refining

Air Products and Grupo Infra Joint Venture Supplying Nitrogen to Pemex for Enhanced Oil and Natural Gas Recovery in Mexico

January 3, 2008

LEHIGH VALLEY, Pa., Dec. 12 -- Air Products (NYSE:APD) announced today that a new joint venture company with its Grupo Infra partner has started supplying 90 million standard cubic feet per day (MMSCFD) of nitrogen to Pemex Exploracion y Produccion (PEP). The nitrogen from the gas turbine and steam driven facility is being supplied for injection and enhanced oil and natural gas recovery from... Read More

Chemical Processing & Waste Management

Nitrogen Cabinets run continuously and unattended.

May 29, 2007

Featuring custom design, Nitrogen Cabinets meet stringent requirements for inerting non-contacting, dry running gas seals found in critical service pumps and compressors. Low-pressure nitrogen prevents any possibility of toxic or hazardous process gases leaking into atmosphere. Units can be equipped with dual filtration system, Balston air dryers for dew point suppression of feed air, and local nitrogen boosters to charge high-pressure cylinders on same cabinet skids. Read More

Chemical Processing & Waste Management, Food Processing & Preparation

Nitrogen Generator targets food and beverage industry.

September 13, 2006

Generating nitrogen from compressed air, MAXIGAS meets Modified Atmosphere Packaging, blanketing, and sparging needs to prevent spoilage. Generator offers alternative to high-pressure cylinders and dewars, eliminating refills and order processing. Because nitrogen is available on-demand, down-time associated with changing cylinders is minimized. Read More

Chemical Processing & Waste Management

Generators produce up to 99.95% pure compressed nitrogen.

February 27, 2004

Nitrosource Nitrogen Generators include digital data management system offering status and system setup information, maintenance indicators, alarm functions, data exchange facilities, and remote control option. Modules can be added to main unit if additional output capacity is required. Generators offer flow rates from 20-120 scfm with nitrogen gas purities from 95-99.5%. All models include prefilters, carbon tower, membrane filter, and built-in oxygen monitor. Read More

  • 1