Orelis S.A.S    Miribel 01708  France
Oct 05, 2005 Intended for ultrafiltration of electrophoretic paint, Pleiade® MP4 consists of stack of separate membranes. Users can see quality of permeate from each membrane though window and isolate individual membranes by means of small valve, eliminating production stoppage. Offering alternative to spiral systems and manufactured from plastics and composites, filter is modular, interchangeable, and resistant to corrosion.

Tiffen Co. LLC, The    Hauppauge, NY 11788
Sep 13, 2005 Designed from ultra quality optical glass, Digital Ultra Clear filter protects lens against dirt, grime, fingerprints, and unexpected bumps and bruises. It is available in sizes up to 82 mm to fit motion picture, broadcast, still photographic, and digital cameras. Product may be kept on camera lens at all times without compromising image quality.

Perma Pure Inc.    Toms River, NJ 08754
Sep 01, 2005 In high particulate, dusty environments such as cement mills or coal-fired power plants, FB-Series removes large particles of dust and ash from gas samples, preventing clogging of finer porosity filters of analysis equipment. Stainless steel construction tolerates corrosive gas environments, and high velocity flow enables self-cleaning for maintenance-free operation. Range of flow ratings and filter elements are available to suit monitoring application.

Koch Membrane Systems, Inc.    Wilmington, MA 01887
Jul 29, 2005 PURON® Modules are intended for membrane bioreactor treatment of municipal and industrial wastewater. Hollow fiber membranes, 2 mm in diameter, with pore size of less than 0.1 µm, are bundled in single header at lower end. Each hollow fiber membrane filter is sealed at upper end and allowed to float freely. With water flowing from outside to inside of filters, solids and particulates are blocked by membrane and remain on outside, while permeate is withdrawn from inside of fibers.

Mykrolis Corp.    Billerica, MA 01821
Jul 20, 2005 Optimizer® C47 enables R and D evaluation of membrane technology for photoresist and chemical filtration on laboratory scale using small volumes of chemicals. Accommodating variety of membranes, including hydrophobic and hydrophilic special clean membranes for applications requiring lower organic content, C47 enables rapid filtration testing and speeds time to production.

SpectraPure, Inc.    Tempe, AZ 85281-2941
Jul 19, 2005 With 40 gal tank and variable pressure delivery pump, SP-1000C delivers 1,000 gal/day of pH balanced drinking water. Self-cleaning backwash carbon filter holds 40 lb of carbon and removes chlorine, sediment, bad tastes, and odor. Air vent filter and safety overflow prevent airborne contamination, and single RO membrane can be replaced without removing housing. Unit requires 26 x 22 in. of space, 4 water connections, and 110 Vac for installation.

KDF Fluid Treatment, Inc.    Three Rivers, MI 49093 9287
Jul 14, 2005 Providing point-of-entry treatment of groundwater supplies, KDF® 85 copper-zinc alloy formulation can be used alone or to protect existing water filtration/purification technologies. It minimizes contaminants by oxidation-reduction process, during which free electrons are transferred between molecules, making harmful substances benign. Medium is 100% recyclable, has no chemical additives, and can remove up to 98% of water-soluble lead, mercury, nickel, and chromium.

ISOPur Fluid Technologies, Inc.    Rocky Hill, CT 06067
Jul 14, 2005 Utilizing Balanced Charge Agglomeration (BCAâ„¢) technology, HR-Series removes and prevents sludge and varnish buildup on critical machinery internals while purifying lubricating and hydraulic fluids. PLC control and display monitors fluid temperature, pressure, flow, and total volume; indicates filter capacity and required change-out; and provides auto shutdown for specific conditions. With 20 gpm flow-rate, system is effective on soft and hard particles.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Jul 08, 2005 Suited for prefiltration and clarification of critical pharmaceutical and biological fluids, Protecâ„¢ filter line is offered in capsule, high-capacity UltraCap® capsule, and cartridge configurations. Products, rated to 0.5 µm, are available in RF and RM versions. Former has one layer of borosilicate glass fiber media, while latter combines outer layer of borosilicate glass fiber media with inner layer of PVDF membrane.

Filtertek Inc.    Hebron, IL 60034-0310
Jul 07, 2005 Manufactured in variety of porosities and materials, disposable syringe filters and transducer protectors are available in 3, 17, and 25 mm sizes in hydrophobic as well as hydrophilic styles. Filters work in medical, diagnostic, and pharmaceutical applications, including small volume HPLC and air or gas venting, while transducer protectors are used in IV and aphaeresis applications to protect pressure transducers from fluid incursion.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
Jun 21, 2005 In-Tank Filtration System comes with 50 micron filter cartridge made of corrosion-resistant CPVC with FPM seals for chemical resistance. Single and double filter cartridge models are available, both with choice of WEBSTERâ„¢ brand Series D or S pumps, which are seal-less and can be run dry. Replacement cartridges are available in 1, 5, 10, 30, 75, and 100 micron ratings with 1 in. ID and 12½ in. OD. All are available in 10, 20, or 30 in. lengths.

Upchurch Scientific, Inc.    Oak Harbor, WA 98277
Jun 01, 2005 Inline filter, designed to increase life of instrument components and optimize results, comes with 10 µm stainless steel frit that can be replaced with 2 µm or 20 µm frits if required. With its 5/16-24 threads, it can be connected to 1/8 or 3/16 in. OD tubing using company's Flangeless or Super Flangelessâ„¢ fittings. Unit is pressure rated to 3,000 psi and can also be used in preparative applications.

EP NTZ Micro Filtration    Inkster, MI 48141
May 09, 2005 Made of extruded aluminum, ALH series uses bypass filtration with radial micro depth filter element to capture 99.97% of particles 2 microns and larger while also absorbing water or water-linked acids. Manifold incorporates compensating valve that permits 1-2 Lpm flow rate without causing pressure drop in original system. Available in 4 filter sizes, series uses max pressure of 210 bar.

Pressure Systems, Inc.    Hampton, VA 23666
Apr 18, 2005 Vented gage KPSI(TM) transducers come with Series 810 SuperDry vent filter, which provides maintenance-free moisture protection. Designed for high-humidity environments where water vapor may condense in vent tube, filter prevents formation of liquid column and guards sensitive transducer electronic components from mildew, corrosion, rust, and other forms of deterioration. Indicating desiccant turns from blue to pink as filter's drying capacity is diminished.

Silver Cloud Mfg. Co.    Millville, NJ 08332 5002
Apr 11, 2005 DURALAN II screen or lens protectors protect displays on touch screen input devices, including pen-based touch systems and POS terminals. With thickness of .007 in. typ, products have hard-coated, anti-glare surface. Adhesive strip, screen-printed around perimeter, can be removed without leaving residue. Made from polycarbonate in custom sizes and shapes, products offer chemical- and scratch-resistance and are also available with anti-reflective surfaces.

Silver Cloud Mfg. Co.    Millville, NJ 08332 5002
Apr 08, 2005 DURALAN II™ anti-reflective display filters are suited for flat panel displays that are used in high ambient light environments. Also suited for use with laptop computers and portable hand-held devices used outdoors, products help improve light transmission and enhance contrast. They can be designed to include EMI/RFI shielding as well as ESD protection. Filters are offered in sizes up to 22 x 44 in. in thicknesses from .020–.250 in.

Hayward Industrial Products Inc., Hayward Filtration    Elizabeth, NJ 07207
Mar 18, 2005 With housing cover sealed directly and positively onto installed filter bag, TOPLINEâ„¢ Series prevents unfiltered process media from bypassing bag. Filters feature smooth, bead-blasted finish, 2-weld design, and adjustable mounting legs. Two TOPLINE models fit filter bag sizes 01 or 02. Housings are available in carbon steel or type 316 stainless steel for corrosion resistance. Side inlet, flow-through-top design results in minimum headroom of unfiltered liquid.

Koch Membrane Systems, Inc.    Wilmington, MA 01887
Mar 14, 2005 TARGA-10® Hollow Fiber cartridges have 10-in. dia and feature ultrafiltration membranes designed to remove particulates, colloids, and larger molecular weight components. Polysulfone membrane material handles pH range from 1.5–13 and can tolerate up to 200 ppm of chlorine. With ability to reduce turbidity to less than 0.1 NTU and SDI to between 1.0 and 3.0, cartridges are suited for use in municipal and industrial water treatment plants.

Blackhawk Environmental Co.    Glen Ellyn, IL 60137
Mar 10, 2005 Automated skimming system Model LNAPL is designed for free product recovery of hydrocarbon liquids from 2 in. or larger wells without removing groundwater. Tip attaches to lower portion of top head drive Pneumatic Trident and explosion-proof Electric Anchor pumps. Skimmer is designed to float with inlet positioned at water or product level. Hydrophobic element intake at center of float allows only hydrocarbon liquids to pass through skimming system.

Airguard Industries, Inc.    Louisville, KY 40218
Feb 28, 2005 Suited for commercial use, UL Class 2 Variflow II-M products are extended surface, rigid cell filters with metal cell sides and mini-pleat construction. Microglass fiber media, in addition to water-repellent binder, allows product to sustain efficiency under high-humidity conditions. Suited for turbulence, variable air volumes, and frequent fan shutdowns in air handling systems, filters are offered in 90%–95% MERV 14 models and 60%–65% MERV 11 models.